Results for
ANTHERMO GMBH
Germany
Swept outlet similar to ANSI B 16.19 / ANSI B 36.10 Swept outlets in pipeline construction A swept outlet is used in pipeline construction just like a welding outlet, a socket welded outlet or a threaded outlet for a 90 ° branch. A swept outlet is an alternative to the T-piece / red. In comparison to the T-piece / Red.Tee, the installation effort for a swept outlet is lower because only one hole has to be drilled into a pipe. The swept outlet can then be welded into this hole. A swept outlet differs from a welding outlet in the type of welding. While a welding outlet is only placed on the run pipe and then welded, a swept outlet is welded directly into the run pipe. Ideal stress distribution Swept outlets were developed in order to achieve the best possible stress distribution for internal pressure and pipe forces. Due to the favorable voltage level, swept outlets are often used in highly stressed pipes in the oil and gas industry.
Request for a quoteANTHERMO GMBH
Germany
Numerous designs available at short notice Branch connections on straight pipe sections Lateral outlets are used for 45 ° branches on straight pipe sections. Other departure angles are possible on request. Standards and special requests We deliver lateral outlets in two pressure levels (3,000 lbs and 6,000 lbs) and in all common materials. If required, we can also supply special materials. Technical specifications You can find more details, technical data and dimensions in our data sheet “Lateral outlets” in the download area. We will be happy to provide you with information on special dimensions and custom-made products on request.
Request for a quoteANTHERMO GMBH
Germany
Elbow outlets for 90 ° bends 1.5 D Up to 2 “elbow outlets fit on elbows of all diameters mentioned in our data sheet (see download area). Larger branches are manufactured precisely for the respective arch diameter. Standards and special requests We deliver elbow outlets in two pressure levels (3000 lbs and 6000 lbs) and in all common materials. If required, we can also supply special materials. Technical specifications More details, technical data and dimensions can be found in our data sheet "elbow outlets" in the download area. We will be happy to provide you with information on special dimensions and custom-made products on request.
Request for a quoteANTHERMO GMBH
Germany
Straight from our warehouse We have around 150 different versions of Socket Weld Outlets (ANSI B 16.11 / MSS SP 97) in our extensive warehouse in Kamen. We can deliver to you at short notice at any time. We only deliver goods of European origin. Standards and special requests We supply socket weld outlets in two pressure levels (3000 lbs and 6000 lbs) and in all common materials. We can also supply special materials on request. Furthermore, socket weld outlets differentiate between reduced and full branches. Express service We can deliver socket weld outlets in stock to the customer within Germany the next day if the order is received by 11.00 a.m. Simply specify when ordering if you would like to use this express service. Technical specifications More details, technical data and dimensions can be found in our data sheet “Socket weld outlets” in the download area. We will be happy to provide you with information on special dimensions and custom-made products on request.
Request for a quoteANTHERMO GMBH
Germany
Straight from our warehouse Approx. We always have 150 different versions of threaded outlets (ANSI B 16.11 / MSS SP 97) available in our extensive warehouse in Kamen. In our warehouse we have threaded outlets with NPT threads according to ASME B1.20.1 in stock. Threaded outlets with BSP / T threads according to ISO 7-1 and with BSP / P according to DIN ISO 228 are available with short delivery times. We only deliver goods of European origin. Standards and special requests Threaded outlets are available in two pressure levels (3,000 lbs and 6,000 lbs) and in all common materials. If required, we can also supply special materials. In the case of threaded outlets, a distinction is also made between reduced and full branches. Express service We can deliver threaded outlets in stock within Germany the next day to the customer if the order is received by 11.00 a.m. Simply specify when ordering if you would like to use this express service.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
ANTHERMO GMBH
Germany
Numerous designs available at short notice Support-free assembly Nipple outlets (MSS SP 97) have been specially developed for support-free assembly. Nipple outlets are available with different ends. Smooth or beveled ends are used for welded connections, while the ends have an external thread for screw connections. We can deliver nipple outlets with NPT thread according to ASME B1.20.1 from our warehouse. We can deliver nipple outlets with BSP / T threads according to ISO 7-1 and BSP / P threads according to DIN ISO 228 with short delivery times. Standards and special requests We deliver nipple outlets in different wall thicknesses (STD, XS, S 160 & XXS and special wall thicknesses) as well as in all common materials. If required, we can also supply special materials. Technical specifications You can find more details, technical data and dimensions in our data sheet "Nipple outlet" in the download area.
Request for a quoteCOMPANY TOR
Russia
Welding inverters of the PRO series are light in weight and dimensions. The metal housing reliably protects the internal components, making it suitable for use on the construction site. Inverters are capable to operate with all brands of stick electrodes from 1.6 to 5 mm and 6 mm (VIKING 250PRO, VIKING 270PRO), including the УОНИ 13/55 brand. The minimum arc welding current is 30 A, the maximum one corresponds to the model. TP at maximum current for all models is 60%. Mains voltage range is 160 ... 260 V.
Request for a quoteCOMPANY TOR
Russia
The inverter machine VIKING 500A PRO is used for manual arc welding of metal blanks. The inverter has a functional control panel with a digital display that displays the main operating parameters. The device is equipped with overload protection and voltage surge protection. The technologies applied during the manufacture of VIKING 500A PRO devices allow performing any tasks in welding, surfacing and cutting metal structures for performing work with any kind of electrodes with a diameter of up to 6 mm and a maximum arc welding current of up to 500А (100% at 420 A). The welding inverter machine can be used at low temperatures and reduced supply voltage. Adjustable functions of hot start and arc reheat imply the ability to adjust the operation of the device with minimal spattering and allow you to perform work in any spatial position of the electrode and welded surfaces.
Request for a quoteCOMPANY TOR
Russia
Welding inverters of the PRO series are light in weight and dimensions. The metal housing reliably protects the internal components, making it suitable for use on the construction site. Inverters are capable to operate with all brands of stick electrodes from 1.6 to 5 mm and 6 mm (VIKING 250PRO, VIKING 270PRO), including the УОНИ 13/55 brand. The minimum arc welding current is 30 A, the maximum one corresponds to the model. TP at maximum current for all models is 60%. Mains voltage range is 160 ... 260 V.
Request for a quoteCOMPANY TOR
Russia
TORUS-255 has the widest possible range of arc welding currents (from 20 to 255 A), which makes it possible to use it both for welding very thin metals, including in the TIG mode (welding with non-consumable electrode), and for continuous welding of large metal structures using an electrode up to 6 mm in diameter. The operating margin in the ТОРУС-255 device is such that it can be effectively used not only for the MMA and TIG modes, but also in the surfacing and cutting modes. At the same time, the weight of the device itself is traditionally not big – only 5.7 kg. Like all devices of the ТОРУС line, ТОРУС-255 has increased reliability with all its maximum parameters. A 3-year manufacturer’s warranty is a guarantee of its high performance in the most severe operating conditions.
Request for a quoteCOMPANY TOR
Russia
The Russian-manufactured inverter machine ТОРУС-320 is used for manual arc welding of metal blanks. The inverter has a functional control panel with a digital display that displays the main operating parameters. The metal housing is equipped with large ventilation holes in order to prevent overheating of internal components. The device is equipped with overload protection and voltage surge protection. The technologies applied during the manufacture of ТОРУС-320 devices allow performing any tasks in welding, surfacing and cutting metal structures for performing work with any kind of electrodes with a diameter of up to 6 mm and a maximum arc welding current of up to 320A (100% at 300A). The welding inverter machine can be used at low temperatures and reduced supply voltage.
Request for a quoteCOMPANY TOR
Russia
ТОРУС-200 is a modern welding inverter device based on a digital high-frequency mains voltage transducer. The device is designed for electric arc welding of low-carbon, alloy and stainless steels, it can operate in TIG and MMA modes. Obtaining high-quality welding joints does not require high qualifications from the employee, which is important for novice welders. In short-circuit mode, the device almost does not consume current, which allows it to be powered from petrol power units with a capacity of 4 kW (6 kVA) and a household network with slumps up to 165 V. ТОРУС-200, like other inverter welding machines of the ТОРУС line, allows you to get welding with stable parameters. It is characterized by: small weight – 5 kg, high performance factor and the ability to work with electrodes with a thickness from 1.6 to 5 millimeters. In addition, the ТОРУС-200 welding inverter is designed for continuous operation not only indoors, but also outdoors.
Request for a quoteCOMPANY TOR
Russia
The VIKING TIG 315 AC / DC PRO argon-arc welding machine is a one-piece structure, designed for power supply from a three-phase 380 V network and produces 315 A at a load of 60%. Special software functions significantly increase the performance factor of the device: HOT-START, ARC-FORCE, ANTI-STICK functions. Specifications: Voltage: V380 Max power: kW5.5 Max current: A315 Operating mode: DC/AC Product class: Professional Burner operating mode: 2-stroke / 4-stroke Pulse mode: yes Availability of the button for saving the selected parameters “MEMORY”, allows you to program 10 parameters for each welding mode (AC/DC). PULSE welding mode is a pulsed consumable-electrode welding (Possibility to use both direct current (DC) and alternative (AC). Waveform selection function (available in AC mode). Dot welding mode 2T and 4T. Adjusting of smooth drop of the terminating current. Adjustable inductance.
Request for a quoteCOMPANY TOR
Russia
The VIKING-500 PRO semiautomatic welding machine has two-piece design, is designed for power supply from a three-phase 380V network and produces 500A at a load of 60%. The design feature consists in a separate feeding mechanism that can be removed from the source to a control cable length of up to 15 meters. The device heats up the product to a minimum, which allows you to work with thin metals. An important feature is the presence of a two-shaft motor for the wire inch (four rollers), which significantly improves the stability and smoothness of the welding material feeding. Special software functions significantly increase the performance factor of the device. ... Key features of VIKING MIG 500 PRO: - digital control of the device; - advanced software settings; - dot welding mode 2T and 4T; - setting of a smooth drop of the termination current; - adjustable inductance; - forced gas purging; - forced wire inch; - the presence of a 36 V socket (for connecting a CO2 gas heating regulator
Request for a quoteResults for
Welding- soldering and brazing - equipment and supplies - Import exportNumber of results
15 ProductsCountries
Company type