Water testing - Import export

The troubleshooter for energy supply systems in the chip area - available in 4 sizes. Chips and dirt can affect the service life of cables and hoses significantly. With the RX system, igus® offers an extremely tight plastic e-tube that is nonetheless very easy to open. Snap-open in the outer radius A smooth, curved outer contour prevents chips from sticking Injection-molded "sealing lips" all around No holes, cracks, undercuts Series RX40 is IP40 tested (TÜV Saarland) Interior separation and guide trough available Covered pin/hole connection and stops "RBR" version with bending radius on both sides available Typical branches of industry Machine tools All applications in the direct chip sector Applications exposed to dust and dirt General mechanical engineering Dimensions and technical datas RX e-tubes RX32 Inner height hi: 42 mm Inner widths Bi: 80mm Bending radii R: 80 - 250 mm Pitch: 32 mm RX E-Tube RX40 Inner height hi: 52 mm Inner widths Bi: 100 mm bending radii R: 100 - 300 mm Pitch: 40 mm RX E-Tube RX48 Inner height hi: 62 mm Inner widths Bi: 120mm Bending radii R: 120 - 325 mm Pitch: 48 mm RX E-Tube RX56 Inner height hi: 73 mm Inner widths Bi: 140mm Bending radii R: 140 - 350 mm Pitch: 56 mm RX E-Tube RX56 High-temperature plastic version of the chip-proof RX energy tubes from stock - 850°C from 24h RX - from stock against hot chips red dot 2011: honourable mention for RX40 iF-Design-Award for RX e-tubes ESD classification: Electrically conductive ESD/Atex versions on request UL94-V0 classification on request e-tubes available as special design with HT material for 850°C hot chips The troubleshooter for energy supply systems in the chip area - available in 4 sizes. Chips and dirt can affect the service life of cables and hoses significantly. With the RX system, igus® offers an extremely tight plastic e-tube that is nonetheless very easy to open. Snap-open in the outer radius A smooth, curved outer contour prevents chips from sticking Injection-molded "sealing lips" all around No holes, cracks, undercuts Series RX40 is IP40 tested (TÜV Saarland) Interior separation and guide trough available Covered pin/hole connection and stops "RBR" version with bending radius on both sides available Typical branches of industry Machine tools All applications in the direct chip sector Applications exposed to dust and dirt General mechanical engineering Dimensions and technical datas RX e-tubes Chip tests in the igus® laboratory demonstrate the tremendous chip-proof properties of the igus® RX tube. Chip-proof - for all types of chips and applications RX32 Inner height hi: 42 mm Inner widths Bi: 80mm Bending radii R: 80 - 250 mm Pitch: 32 mm RX E-Tube RX40 Inner height hi: 52 mm Inner widths Bi: 100 mm bending radii R: 100 - 300 mm Pitch: 40 mm RX E-Tube RX48 Inner height hi: 62 mm Inner widths Bi: 120mm Bending radii R: 120 - 325 mm Pitch: 48 mm RX E-Tube RX56 Inner height hi: 73 mm Inner widths Bi: 140mm Bending radii R: 140 - 350 mm Pitch: 56 mm RX E-Tube RX56 High-temperature plastic version of the chip-proof RX energy tubes from stock - 850°C from 24h RX - from stock against hot chips Submersion test in water - Various tube types were submerged under water. The new RX tube needs over 30 seconds until it is filled up, thus proving its high leak tightness Y = time in seconds A = igus® products B = competitor Chip penetration test - Various types of tube were exposed to a defined quantity of chips. In the new RX tube, after 80,000 cycles only 0.2 g of chips were found in the interior Y = chip mass [g] A = igus® RX e-tube RX40.100.100 251.900 cycles B = igus® e-tubes 68.10.100.0 256.132 cycles C = test tube 01 250.907 cycles D = test tube 02* 2.600 cycles *Teststop after 2.600 cycles E = igus® products F = competitor E-Chain® selection aids You can find the right E-Chain® quickly by entering concrete parameters and with the aid of a comparison table. Productfinder Assembly instruction Dismantling / assembling a cover, replacing a chain link and assembling / inserting the RX tube. Assembly instruction Configure interior separation Define cables, select chain and configure interior separation. Now also for RX tubes! Interior separation configurator Application examples Applications in various industrial sectors. RX tubes Series RX - new chip-proof design, small pitch, removable cover 1 Chip-proof design without undercuts and edges 2 Excentric locking 3 Material igumid G 4 rounded shape 5 covered pin/hole connection RX tubes IP tested Technical report TÜV NORD red dot 2011: honourable mention for RX40 iF-Design-Award for RX e-tubes ESD classification: Electrically conductive ESD/Atex versions on request UL94-V0 classification on request e-tubes available as special design with HT material for 850°C hot chips

Environmental testing covers a wide range of pressures that your product may be subject to and we can simulate different climatic conditions to show weaknesses in design. Testing will allow you to demonstrate your product can be used in any conditions that it may be exposed to. Whether your product is for the food industry and will be exposed to high pressure cleaning, a light to be used outdoors or forms part of equipment that will be used in an environment where the ambient temperature is higher than in the UK, we can help. Some examples of tests are listed, but this is not an exhaustive list so please get in touch if you need to discuss your requirements: Water and Dust Ingress Salt Spray Shock and vibration Temperature and Humidity UV (Solar Radiation) simulation We are UKAS accredited for some environmental testing, giving manufacturers assurance of reliability, accuracy and consistency

You can also find products made by Enbi Plastics in the cars of for instance Mercedes, BMW and Audi! One example of this is the lift bar, which connects car windows to their electronic controls. In the past, they drilled holes in the glass to do this, but that is not possible with today’s layered, safer glass. That is why a dimensionally stable part that could form a solid connection between the window and the technology was needed. Our client glues the lift bars to the car windows using putty. Enbi Plastics prepares the part: we use an activator and primer. This is done in a fully climate controlled room. After production, we conduct rapid aging tests: By applying water to the parts and exposing them to a certain temperature for five days, we can check if the putty continues to stick. That way, we ensure optimal reliability. We continually make this product, constantly maintaining the right stock levels for the client.

Moisture meter Name: Techscan pinless wood moisture meter - Flooring Material: Wood, Flooring, Wooden floors Mc: 5-30% on wood Calibrations: Wood Overview Save time, and work with confidence, with TechScan. It’s the next generation of pinless moisture meters ideal for flooring installers. The right diagnostic tools are a must when addressing water damage, testing sub and top floors to ensure similar % moisture content. TechScan pinless moisture meter makes it easy to find moisture “hot spots” and narrow down areas affected by moisture. Use it as a stand-alone tool or with our pin-type moisture meter for further precise diagnosis. The fast, accurate, and non-destructive TechScan is also recommended for restoration and building inspection for checking moisture besides floors in walls and ceilings. Your Benefits: Easy to read analog display Handheld, compact and lightweight Two scales: • Wood Scale - 5% - 30% moisture range for wood • Reference Scale - 0-100 color coded referen

Accredited with CPD & recognised by ILM, part of the City & Guilds Group. The Authorised Person (AP) has operational responsibility for the water service. They will be qualified, sufficiently experienced & skilled to fully operate the service, including its maintenance. This role involves maintenance of records, quality of service and system safety (integrity) and overseeing routine testing of the water, storage & distribution system. Topics covered on the course include: - The requirements for growth of Legionella, interactions of Legionella with other microbiota - Factors affecting the accumulation of biofilm - Effectiveness of biocides against Legionella, protozoa & biofilm - When to use biocides, selection of biocides - Effectiveness of temperature as a Legionella control method - Cold & hot water storage design & upgrading, distribution system issues - Showers, disposable & re‐usable shower head filters. - Monitoring, Legionella Sampling

GasAlertMicroClip is called now: GasAlertMicroClip XL with improved technology. In future, this device shows its correct operation function by a green flashing light. Newly li-ion battery was developed for a longer service life for over 2 years The handy and compact multigas detector of BW-Technologies provides protection effectively up to 4 dangerous gases at once. Due to single-button operation it provides easy handling and therefore it reduces time while briefing its user. Features of GasAlertMicroClip: Service life: 2 years Permanent display up to 4 gases concentrates in real-time at once Impact- and water-resistant Self-test of all functions for sensors, battery, electronic and acoustic (95dB)/ visual alarm Bright, wide-angle flashing alarm display With integrated vibration alarm, ideal for noisy environment Compatible with BW-MicroDock II Free adjustable alarm points Setting of various languages (German, English, French, Spanish, Portuguese Technical Data Size (cm): 10.8...

With the simple, robust and maintenance-free single gas monitor GasAlertClip Extreme of BW-Technologies a reliable monitoring and detection is secured (e.g. personal security) of all threats by single gases, whereby the measured value is displayed in real-time. The operating time is limited to 2 years and absolutely maintenance-free, batteries neither need to be charged nor to be exchanged. Thanks to simple operation time exposure reduces considerably, therefore this device is excellently suitable for industrial applications. Features of GasAlertClip Extreme: Large LCD-display indicates remaining operation lifetime in months, days, and hours Impact- and water-resistant Self-test of all functions of sensor, battery, electronic and acoustic/ optical alarm Compatible with the automatic testing station “BW-MicroDock II” Bright, wide-angles blinking alarm display With integrated vibration alarm for surroundings with higher noise level Daily self-test activated by user Recording and...

-Static Pressure Test Equipment -LOSS OF PRESSURE TEST EQUIPMENT -WATER METER ENDURANCE (ABRASION) TESTING EQUIPMENT -HEAT METER DURABILITY TEST EQUIPMENT -DOMESTIC WATER METER TEST AND CALIBRATION EQUIPMENT -WOLTMAN WATER METER TESTING EQUIPMENT -HEAT METER TEST AND CALIBRATION EQUIPMENT -MOBİLE TEST UNIT