Results for
ANTHERMO GMBH
Germany
Generate cold water / flake ice continuously Proven use Falling film chillers have been used in various industrial sectors for many years. Water runs over the heat exchanger plates from a trough arranged above the heat exchanger plates. This enables a continuous heat transfer between the water and the cooling medium. Outstanding advantages The arrangement of holes in the upper tub enables targeted water distribution on the heat exchanger plates. The construction using a perforated tub has the further advantage that no contamination occurs and the liquid to be cooled is evenly distributed. Made of stainless steel The trickle cooler is made entirely of stainless steel. You can choose between different materials (see data sheet). Low boiling delay Our trickle coolers are characterized by the fact that the boiling delay is low in flooded operation, whereby overheating can be selected in dry expansion operation.
Request for a quoteCRB ANALYSE SERVICE GMBH
Germany
Moisture content, loss on ignition – Particle size distribution – open porosity – Water absorption – Bulk density / Grain volume weight – Bulk density DIN 51081:2002-12 - Testing of oxidic raw materials and materials - Determination of mass change during annealing. DIN EN ISO 26845:2008-06 - Chemical analysis of refractory products - General requirements for wet chemical analysis, atomic absorption spectrometry (AAS) methods, atomic emission spectrometry with excitation by an inductively coupled plasma (ICP-AES). DIN EN 993-18:2002-11 - Test methods for dense shaped refractory products - Part 18: Determination of apparent density of granular materials by the water displacement method under vacuum.
Request for a quoteKAUFMANN GROUP
Slovakia
We provide extensive services in welding to a variety of industries. We specialize in pipe welding in refineries, boiler rooms, heating plants, food processing plants (dairies, etc.), air and water distribution in manufacturing halls and other industries. We use a wide range of welding methods including TIG, MIG/MAG (CO2 shielded), AC/DC (coated electrode) and flame welding.
Request for a quoteMAGAGER, UNIPESSOAL, LDA
Portugal
Domestic, agricultural, irrigation, industrial - Transfer and pressure Max temperature. water: 35º C Max sand content: 60 g/m3 Maximum starts per hour: 30 / h Asynchronous single-phase 230 V, three-phase 400 V - Class F Stator cooled with non-toxic and non-polluting mineral oil Stainless steel shaft (AISI 416) - IP 58 Protection Filter, liners, lid in 304 stainless steel Retainer and mechanical seal (aluminum axide-carbon-graphite) Mechanical seal in SIC/SIC on request Recommended for use with clean water in domestic, civil and agricultural applications, such as water distribution in combination with pressure sets, for irrigation of gardens, allotments and for increasing pressure. Permanent or transportable installation directly on the bottom of the tanks thanks to the lower Noryl guide, shaft and rubber feet on the bottom of the pump, which reduce vibration.
Request for a quoteMAGAGER, UNIPESSOAL, LDA
Portugal
Motor immersed in cooking oil, non-toxic, non-polluting. Externally cooled by the pumped liquid. Insulation class F. Motor protection IP68. Thermal sensors built into the motor winding. Recommended for use with clean water in domestic, civil and agricultural applications, such as water distribution in combination with pressure sets, for irrigation of gardens, allotments and for increasing pressure. Permanent or transportable installation directly on the bottom of the tanks thanks to the lower Noryl guide, shaft and rubber feet on the bottom of the pump, which reduce vibration. Combination of stainless steel in the turbines with Noryl reinforced with fiberglass in the diffusers, offers excellent resistance to abrasion due to sand. Double seals, lip seals and carbon ceramic reinforced mechanical seal. Pump body, pump head and turbines in AISI304 stainless steel and shaft in AIS420 stainless steel.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
MAGAGER, UNIPESSOAL, LDA
Portugal
Motor immersed in cooking oil, non-toxic, non-polluting. Externally cooled by the pumped liquid. Insulation class F. Motor protection IP68. Thermal sensors built into the motor winding. Recommended for use with clean water in domestic, civil and agricultural applications, such as water distribution in combination with pressure sets, for irrigation of gardens, allotments and for increasing pressure. Permanent or transportable installation directly on the bottom of the tanks thanks to the lower Noryl guide, shaft and rubber feet on the bottom of the pump, which reduce vibration. Combination of stainless steel in the turbines with Noryl reinforced with fiberglass in the diffusers, offers excellent resistance to abrasion due to sand. Double seals, lip seals and carbon ceramic reinforced mechanical seal. Pump body, pump head and turbines in AISI304 stainless steel and shaft in AIS420 stainless steel.
Request for a quoteWATER HYGIENE CENTRE LTD
United Kingdom
Accredited with CPD & recognised by ILM, part of the City & Guilds Group. The Authorised Person (AP) has operational responsibility for the water service. They will be qualified, sufficiently experienced & skilled to fully operate the service, including its maintenance. This role involves maintenance of records, quality of service and system safety (integrity) and overseeing routine testing of the water, storage & distribution system. Topics covered on the course include: - The requirements for growth of Legionella, interactions of Legionella with other microbiota - Factors affecting the accumulation of biofilm - Effectiveness of biocides against Legionella, protozoa & biofilm - When to use biocides, selection of biocides - Effectiveness of temperature as a Legionella control method - Cold & hot water storage design & upgrading, distribution system issues - Showers, disposable & re‐usable shower head filters. - Monitoring, Legionella Sampling
Request for a quoteALFA-MED LLC
Russia
Body composition measurement by means of the LineBIA method is based on assessing the distribution of water volumes in the human body and on tissue ability to conduct electricity. Cannot be used without an interface block. The module can: • determine the quantitative content of fluid in the body, body mass index, standard metabolism; • determine the active cell mass, bone mass, fat mass; • obtain unbiased data on the human body quantitative composition; • get linear control and timely correction of nutrition programs in clinical practice and sports medicine; • an unbiased assessment of physical conditioning and nutrition; • analyze the water-salt metabolism; • analyze the state of water-salt metabolism during the period of adaptive changes in the human body, under changing weather conditions (mountain climate, hot climate, or dry climate).
Request for a quoteResults for
Water distribution - Import exportNumber of results
9 ProductsCompany type