Used motors - Import export

When combined with the appropriate gearbox, drylin® linear axes with the new BLDC motors achieve higher speed and greater torque. Energy is used more efficiently, as a result of which EC/BLDC motors are more durable and have a longer service life. Due to the fact that carbon brushes are not used, brushless motors are almost completely wear-resistant, generate less heat and enable longer, uninterrupted operation. The EC/BLDC motors have the same connections as NEMA 17/23/24/34 stepper motors. - Brushless motors enable higher speed and greater torque - Longer operating time and service life - Virtually wear-free - Less heat generated - for all drylin® linear modules and axes with NEMA17/23/24/34 hole pattern

Versatile choice due to the high torque and speed. This motor is the best choice for most applications with medium loads. Stepper motors from igus® are a good supplement to drylin® linear axes. They are characterised by their cost-effectiveness, their precision and easy control. They work reliably under the most varied environmental conditions (depending on the selected class of protection IP). The igus® stepper motors can be connected to the most common motor controls using standardised electrical connection. The connector interface provides a high IP65 protection level (IP: International Protection). The higher the IP rating, the better the motor is protected from the ingress of dirt and water. The encoder sends signals from the motor to the motor control. The encoder verifies that the required linear motion has occurred precisely as required. Encoder = increased machine accuracy.

For designs that require a stepper motor with directly integrated lead screw, drylin® E offers the ideal solution. The stand-alone versions with NEMA11 stepper motor (very small type) are available in a compact type with or without encoder. The lead screw is centred and in combination with the dryspin® high helix thread technology, the system has a long service life. Stepper motors from igus® are a good supplement to drylin® linear axes. They are characterised by their cost-effectiveness, precision and easy control. They work reliably under the most varied environmental conditions (depending on the selected class of protection IP). The igus® stepper motors can be connected to the most common motor controls using standardised electrical connection. The encoder sends signals from the motor to the motor control. The encoder verifies that the required linear motion has occurred precisely as required. Encoder = increased machine accuracy.

This little motor has impressive torque and high RPMs. Reliable operation with quick movements of low loads. Stepper motors from igus® are a good supplement to drylin® linear axes. They are characterised by their cost-effectiveness, their precision and easy control. They work reliably under the most varied environmental conditions (depending on the selected class of protection IP). The igus® stepper motors can be connected to the most common motor controls using standardised electrical connection. Motors with stranded wires are the least expensive and the most common stepper motors. The connecting wires for this type exit from the housing and will be connected with a JST connector. They are usually installed in machines and equipment that have an additional housing or are used in clean environments.

Our vibration motors are manufactured using top-quality metals, such as a special blend of aluminium injection and ductile ggg 40 cast iron, in an IP66 protection standard. They offer various speed, frequency, and voltage options for maximum efficiency. We conduct thorough analyses, tests, and research and development studies before and after casting to produce premium-quality products. Vibration motors are a type of motor that generate vibrations using electrical or pneumatic energy. Vibration motors are utilized in various industrial machines that require vibration energy such as food and flour factories, construction, subways, motorways, hydro power plants, forced water tunnels, steel mills, concrete factories producing prefabricated elements, mining, and asphalt and cement plants. Additionally, they are employed in the operation of sand dewatering machines, recycling plants, steel and similar silos, feeders, sieves, vibratory discharge channels, compaction and flow processes.

2-phase high-torque stepper motor in NEMA 17, NEMA 23 and NEMA 34 sizes with flat-milled shaft (D-shaft). 1.8ׄ° increment angle (full increment) with integrated positioning control. Note: Stepper motor with integrated positioning control. It forms a convenient unit consisting of stepper motor and intelligent controller. Reference travel is possible on a block with reduced electric current without proximity switch. Integrated rotational monitoring. Smooth running through dynamic switching of increment trip. Actuation via single I/O interface, 31 position configurations and call-ups. Control unit can be parametrised quickly and conveniently with the software. The software and manual for programming the positioning control are available as free download. When selecting a suitable motor, using just the retaining torque is not enough, as the motor’s torque decreases with the speed. It is therefore essential to select the correct motor according to the torque curve.

Adapter 11-pole flexprint connector (pitch 1.0 mm) to 8-pole screw terminal 11-pole flexprint connector, for use with motors EC 10, EC 13, EC 20 flat, EC32 flat, EC45 flat Screw terminals pitch 2.54 mm for AWG 26 - 20

Adapter 4-pole flexprint connector (pitch 1.0 mm) to 4-pole screw terminal 4-pole flexprint connector, for use with all EC micro motors without Hall sensor and with a flexprint port Screw terminals pitch 2.54 mm for AWG 26 - 20

The DC motors for getting started. maxon A-max stands for high-quality DC motors with an optimal price/performance ratio. The drives use an ironless rotor and AINiCo magnets. Thanks to automated manufacturing, the maxon A-max motors offer top performance at an attractive price. Of course you don't need to forfeit maxon's modular system. A large variety of gears, sensors and controllers is available and can be combined to your heart's content. Choose from six motor sizes: Ø 12, 16, 19, 22, 26 and 32 mm 0.5 – 20 WØ 12 – 32 mm. 0.5 – 20 W. maxon brushed A-max motors use a highly efficient ironless rotor and AINiCo magnets.

Gas equipment designed for cooking, heating and hot water supply, including equipment as a part of combined devices Modular automatic burners (gasfired and combined) and gasequipment with modular automatic burners for cooking, heating and hot water supply Devices designed to be built in gasusing equipment and operated separately from equipment mentioned above including control, adjustment and safety appliances Steam boilers with steam pressure over 0,07MPa and hot water boilers with water temperature over 115 °С Equipment designed to be used in manufacturing processes at industrial facilities, except for the technical devices included in the list of gasusing equipment in which respect the requirements of TR CU 016/2011 are specified Equipment using gas as motor fuel Requirements of TR CU 016/2011 are set with regard to gasusing equipment listed in Annex № 1 to the Regulations.