Results for
FRIGOFLUID S.R.L.
Italy
Most industrial process temperature control units work through the pressure exerted on the water of the process utilities: this is convenient in most “standard” cases, given the higher efficiency developed by the system. However, some critical process issues can make this type of operation difficult: this is the case of machines that leak fluids, or with leakage, and that it is not convenient to maintain on the spot. In such cases, it is therefore useful to work with a vacuum temperature control unit, which sucks in utility water. FTT PD water thermoregulators are flexible and effective systems, which can work under either pressure or vacuum depending on the peculiarities of the system. Any fluid losses are therefore minimized during operations. A simplicity of operation is also ensured by the touch-screen panel, also found on other Frigofluid temperature controllers. Models with an increased pump are also available for users characterized by high pressure drops.
Request for a quoteANTHERMO GMBH
Germany
Temperature control of gaseous and liquid media Flat tube heat exchangers are generally used as air / air or air / liquid heat exchangers. Flat tube heat exchangers are used where the (exhaust) air is polluted and the installation space is limited. In heat recovery in particular, there are numerous applications for flat tube heat exchangers as so-called exhaust gas / exhaust air heat exchangers. Little installation space and less pressure loss While the rows of tubes in smooth tube heat exchangers consist of round tubes, the rows of tubes in flat tube heat exchangers have a special profile (see illustration). This special tube profile offers advantages over the round profile in certain applications. Flat tube heat exchangers require less installation space than smooth tube heat exchangers with the same exchange area and are therefore also lighter.
Request for a quoteANTHERMO GMBH
Germany
Temperature control of liquids Tube coil heat exchangers (so-called tube cooling coil heat exchangers) are generally used to control the temperature of liquids. This system can also be used to heat or cool liquids in a controlled manner. Due to their special shape, pipe coil heat exchangers are sometimes also called hairpin heat exchangers. Inexpensive applications The simple and solid structure enables it to be used in cost-effective applications. Coiled tube evaporator systems are ideally suited for brine and glycol applications. Classic variant Coiled tube evaporator systems are a classic and proven variant in the field of heat exchanger systems. Coiled tube heat exchangers are often used in ice storage systems or in the production of cold water units. In ice storage systems, coils can be used to achieve an even build-up of ice around the coils.
Request for a quoteIMV SPEDITION LTD
Bulgaria
IMV SPEDITION, Further, faster, saver
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
FRIGOFLUID S.R.L.
Italy
FT water temperature controllers make it possible not only to cut down on the use of electrical power for heating (in fact, the heating elements remain off during steady-state operation), but they also make it possible to limit the cooling power spent on cooling by self-stabilizing through a process called Autotuning. This system also saves resources (water and energy) compared to units without them. They are designed to condition molds and cylinders for various industrial processes, including plastics and rubber molding and extrusion, and in the paper industry.
Request for a quoteFRIGOFLUID S.R.L.
Italy
Often the main critical issue for molding industries is not achieving the temperatures needed for their processes, but maintaining them over time. Hence the usefulness of temperature control units that not only send the fluids needed to do the job up to temperature, but are capable of subsequent self-tuning. This is the way FTT DC water temperature controllers operate, which wrap direct cooling to stabilize fluid grades after the desired temperature has been reached. This requires integration with a source of cooled water: a simple well or a chiller or cooling system (chiller or dry cooler). Our engineers are available to determine which cooling solution is the most effective and economical. Not only that. The management of these successive heating-cooling steps is easier when done with a touch screen: a feature with which FTT DC temperature controllers are equipped. Units in the FTT category are specially designed to condition molds.
Request for a quoteEP EHRLER PRÜFTECHNIK ENGINEERING GMBH
Germany
with adjustable humidity and temperature to simulate the environmental conditions of a test specimen (e.g. household appliances, heating technology) The basis is a standard or climatic chamber (e.g. test kitchen, environmental simulation) with adjustable air humidity and temperature. On the basis of decades of experience in automotive test engineering, EP-E developed a concept in which the air flows in a circle (loop design). The result is a very excellent homogeneous temperature and humidity distribution. Through precise temperature and humidity control, it is possible to set different combinations of air conditioning and thus precisely adjust the required test conditions. The determination of the air flow (exhaust air volume) is carried out via a measuring section with the use of Laminar Flow Elements (LFEs). In order to determine the volume flow, pressure and temperature sensors are used to determine the air volume flow of the climatic chamber(s).
Request for a quoteJENTY
Russia
This type of transportation implies constant maintenance of a certain temperature mode throughout the route of the road train. In refrigerator semi-trailer, the temperature mode is maintained in the range from – 25 °C to + 25 °C, regardless of weather and temperature conditions outside. INDUSTRY SPECIALIZATION We have accumulated enough experience in delivering cargo of any complexity and offer a reliable service taking into account industry specifics. High standards are confirmed by international certificates: •GDP is a standard of compliance with the safety requirements of pharmaceutical product transportation, aimed at ensuring the quality of pharmaceuticals all the way from the manufacturer to the retail chain and medical institutions. •TAPA is a complete set of measures that ensure safety at all stages of transportation.
Request for a quotePRIMUM
Belarus
PRIMUM offers specialized solutions for international transportation requiring temperature control (standard and bi-temp) Our fleet includes more than 200 isothermal semi trailers equipped with Carrier Vector 1550 and Thermo King temperature control systems. This allows us to transport goods from at -25°C to +25°C. We also provide remote temperature monitoring for all our clients. GDP & TAPA certified.
Request for a quoteBHL-GROUP
Russia
Groupage is the transportation of small-sized cargoes of various customers in one direction in one vehicle. Scheme of transportation of groupage cargoes 1. Transportation of single-piece cargo from the sender’s warehouse to the consolidation warehouse for batch completing. 2. Cargo handling in a consolidation warehouse, which may include additional packaging, the use of containers, etc. 3. Customs clearance and preparation of other documents for transportation. 4. Shipment of groupage cargo to the country of destination by road, water, rail or air transport. 5. Customs clearance in the country of destination, as well as drawing up of documents required for the subsequent sale of goods or use of equipment. 6. Delivery of single-piece cargo to the specified address.
Request for a quoteResults for
Temperature controller - Import exportNumber of results
16 ProductsCompany type