Technical production - Import export

At each stage of research and development throughout your project, we hold strategic planning meetings with the design office and the manufacturing workshops, so that we can fully capitalise on our internal theoretical and practical skills, as well as having co-engineering discussions with your teams. The close collaboration between our development and manufacturing teams enables us to combine theoretical creativity and best practice.. All technical solutions undergo a practical feasibility and optimisation analysis upstream in the manufacturing phases. The various solutions studied are reviewed again, with the final decision being made according to the solution that offers the best balance between technicality, productivity, efficiency and cost.

In close collaboration with your technical and production teams, we target equipment whose cost-effectiveness can most be improved through digitisation. We define the profitability objectives, and then adapt your production facilities and roll-out the most appropriate technical solutions in order to achieve them. Analytics & data interpretation We install the digital tools required for: continuous collection of the generated data analysis and synthesis of the information collected at regular intervals interpretation of the results via secure remote connections at your facilities. Based on the findings, and in close collaboration with your maintenance teams, we organise the following: preventive and/or corrective maintenance programmes actions for improvement follow-up of these actions and the financial gains generated If required, we can perform all the operations needed to support your teams.

Through a representative office in Hong Kong, CIC supports the often difficult procurement of technical products from China, e.g.: efficient search for suitable suppliers direct, native speaker contact with the producer Contract design and processing Supplier Qualification Quality monitoring Logistics control ZURÜCK

The fluoropolymer coating for special tank systems and containers. Modern tank and environmental technology requires safety and cost effectiveness. Gutbrod stands for innovative ideas and a dedication to service in coating with fluoropolymers and other technical, high-performance materials. Using products with the name, a chemical and acid resistant inner coating that is sustainable and cost-effective can be applied to special tank systems and containers through an access port. The material for this Fluorpolymer-coating, which will be applied with a specific method, is highly resistant against chemicals and acids, and has extraordinarily advantages, compared with common coating and lining systems.

Production of non-standard products according to technical specifications provided by the customer. "Astra" has perfect welding and metal working equipment in-house which could be applicable not only for cylindrical tanks but also for various shapes and various purpose equipment - just give us a hint!

Main Technical Data Production speed Up to 600 pcs/min Production linear speed 300 m/min−max Efficiency 85-90% Optional Machine Features Low waste side panels application Front ears application QCS vision system Product width (min−max) 250-380 mm Product length (min−max) 370-600 mm Required air pressure 6 bars Required air flow Approx. 6,000 Nl/min Noise Lower than, 85 dBA

Main Technical Data Production Speed Up to 1000 pcs/min Production Linear Speed 280 m/min max Efficiency 85-90% Product Width (min-max) 70-115 mm w/o wings, up to 165 including wings Product Length (min-max) 180-320 mm Required Air Pressure 6 bar Noise Lower than 90 dBa Basic Machine Features • Top sheet with NW side barriers • Fluff core with short ADL layer • Core anatomic shaped according to customer design • Core embossing according to customer design • Back sheet • Release tape glued on line • Edge sealing & contour cut out according to customer design • Wing tape glued on line Optional Machine Features • Thermo sealing for three pieces top sheet • Videojet printing on ADL • Individual easy wrap fold • Pouch tape • Bypass for straight product

Adult Diaper AD−250 Main Technical Data Production speed Up to 250 pcs/min Production linear speed 200 m/min−max Efficiency 85-90% Product width (min−max) 480-800 mm Product length (min−max) 710-975 mm Required air pressure 6 bars Required air flow Approx. 8,000 Nl/min Noise Lower than, 85 dBA Basic Machine Features Full servo technology Electronic job change High quality multi-zone forming system with 2D/3D core design Inline & stand alone unwinders Automatic splicing units “ZERO SPEED” Automatic web guiding systems Full feature product User-friendly HMI panel Bi & tri-folding systems Horizontal stacking & counting system Advanced QCS system Safety measures conforming to “CE” standards Optional Machine Features Waist band application Long life carbide die cutters Dual core design

For the production and application of industrial goods in car industry we follow the SRPS ISO 9001-2008 ISO norm as well as TRV norm.This understands the specific application during technical production and personal responsability in the use of specific materials for the production of goods used in car industry. We produce air tubes, fuel tubes and oil tubes, shock absorbers, bearers, membranes, floor mats, protection caps resistant to grease and oils... Hemogum can meet car industry customers in production of articles for all renowned car manufacturers. We have the necessary equipment that helps us guarantee high quality, uniformity, excellent physical characteristics and high dimensional precision of our articles. For the production of car industry goods we apply the NR, CR, SBR, NBR, MWQ, FWK

DSEC's commitment on the construction of Biodiesel plants is based on a very specialized technical knowledge of the Biofuels production processes; in this article you will find a more detailed understanding about the process of Methanol Rectification and Glycerin Purification. Methanol Rectification The methanol coming from the upstream process units is fed to the rectification column. The methanol is recycled to reactor loop circuits.

TECHNICAL SPECIFICATIONS: Product to be packed: Yogurt, Lala, Sour Cream, Mayonnaise, Mustard Paste, Honey Dosing volume: 200-3000 ml Speed: up to 20 tubs/min Cup material: Plastic tubs Lid material: Aluminum Voltage: 220/380 V, 50 Hz Power: 0.6 kW/ 1kW Dimensions: 1600 x 900 x 1400 mm Weight: 150 - 500 kg BASIC SCOPE OF SUPPLY: De-nesting of tubs from magazine to transfer mechanism Linear movement of tub Filling of set product volume Placing of plastic lid on tub Leak-proof closing of plastic lid Date coding by contact type ink printer on self-adhesive label Transfer of filled tub on table for ready products TUB FEEDING UNIT Operator puts stack of tubs into infeed magazine (capacity of infeed magazine is approx. 20 pcs.). Tub feeding unit provides piece by piece feeding of tubs on the conveyor. Tub feeding unit provides possibility of stacking for three tub sizes (for 200 ml, 500 ml and 3000 ml).

TECHNICAL SPECIFICATIONS: Product to be packed: Yogurt, Lala, Sour Cream, Mayonnaise, Mustard Paste, Honey Dosing volume: 150-500 ml Speed, max.: 55-60 cups/min Cup material: Plastic cups Lid material: Aluminum Voltage: 220 V, 50 Hz Power: 2 kW Compressed air, max.: 900 litres/min. at 6 bar Dimensions: 2400 x 1200 x 1900 mm Programmable Logic Controller: Unitronics (Israel) BASIC SCOPE OF SUPPLY: Entire frame & guards of the machine is made of stainless steel SS304 with protective acrylic covers and door handles Parts which are in contact with product made of stainless steel SS316 Drive unit for cup & lid-holder disc (there are pins around the cavity on rotary turret to hold the lids. The cups magazine has a step to hold the cups during discharge) Piston filler for viscous products Cup feeder to turret with vacuum cup Magazine for top aluminum lid loading & lidding unit (precut lids) Lid sealing device “NO cup – NO filling” system Inkjet printer for date coding

TECHNICAL SPECIFICATIONS: Product to be packed: Yoghurt, Juice, Sour Cream, Mayonnaise, Mustard Paste, Honey Dosing volume: 100-500 ml Speed: up to 25 cups/min Cup material: Plastic cups Lid material: Aluminum Voltage: 220 V, 50 Hz Power: 1 kW Dimensions: 1200 x 1000 x 1800 mm Programmable Logic Controller: Unitronics BASIC SCOPE OF SUPPLY: Entire frame & guards of the machine is made of stainless steel with protective acrylic covers and door handles Product hopper without heating and agitator Magazine for cups Magazine for top aluminium lid Complete set of changeable rings for cups with neck Ø 75 mm and 95mm OPTIONAL EQUIPMENT FOR PACKING OF SPECIALIZED PRODUCTS: –Modified filler design for working with products having suspended particles –Product hopper with heating jacket and agitator (for such products as jam, honey, peanut butter, etc.) –Unit for lifting and rotation of cup for uniform filling for high viscous products

Mixing Bulk material processing with convincing results With our mixing systems homogeneous mixtures and coatings are produced from various bulk material. This is enabled by our cutting-edge mixing machinery which includes drum mixers, container mixers, Nauta Mixers, high-speed mixers, Rhönrad mixers, swivel screw mixers and other special mixing systems. Modern machinery guarantees quality The mixing machinery at Ebbecke is supplemented by a fully automatic gravimetric load cell weighing plant, as well as by a chopper, nozzle fittings and equipping possibilities for various containers. Technically, Ebbecke Verfahrenstechnik AG is thus equipped for every task imaginable in the area of contract mixing, even for contract mixing of particularly shear-sensitive bulk material. The quality of our mixing machinery proves itself in the technical details: Product-contacting parts consistently made of stainless steel in accordance with the current hygiene standards. Furthermore, all mixing sys

Centrifugal Screening Vibration/rotation screening plants – the solution for fatty, oily and light products The vibration/rotation screening machine enables the screening of products that are difficult to screen and that would smear up screen inserts. This relates in particular to fat-containing and oiled products and products with very light bulk weights. For this purpose, an eddy current is generated by a wing rotating in screening half shells. Through targeted vibration overlays of the the outer screen fabric a seal of the fabric is prevented, thus ensuring a high-quality screening even for procedurally sensitive products. Technical data Screening area 0.5 or 0.9 m² Mesh width: 75-10,000 µm Product-contacting parts: Rustproof materials Cleanability: Completely cleanable Number of fractions: 2 Product feeding: Extractable dosing screw Throughput: Depends on mesh size and the product Number of plants: 2 Areas of application Grinding of soft products without temperature i

Cleaner, solvent-based or without labelling obligation, technical and medical products, cosmetic products in different packagings, pump sprays, canisters, barrels

Multilingual typesetting services for the following: • Operation Manuals/ Technical Documents • Product User Manuals and Guides • Training Materials • Marketing Text/Advertising Copy • Financial reports and Corporate Business Documents • Brochures, Leaflets, etc.

Welcome to the engineering office for technical documentation - Karla Flemming, your trustworthy partner for technical documentation and conformity assessment. As an experienced mechanical engineer and technical writer, I offer you comprehensive services in the area of technical communication and product safety. Our expertise: 1. Technical documentation: With a deep understanding of complex technical systems and years of experience in technical writing, we create precise, well-structured and easy-to-understand technical documentation. From instruction manuals to operating instructions to service manuals, we deliver high-quality content that your customers will value. 2. Conformity assessment: We support you in ensuring that your products comply with applicable national and international standards. Through our thorough compliance assessments, we help you obtain all the necessary certifications and meet market requirements. Best regards, Karla Flemming Owner

1. PRODUCT DESCRIPTION: Raw cashew nuts in shell 2. PRESENTATION: Dried, cleaned, sorted 3. ORIGIN: Ivory Coast, Ghana, Benin, Togo, Guinea Bissau 4. PRODUCTION CALENDAR: March - July 5. TECHNICAL SPECIFICATIONS OF PRODUCT: - Nut counts per kg: 205 max. - Out-turn: 46 - 50 lbs / 80 kg bag - Moisture: 10.0 % max - Defective: 12.0 % max - Foreign matters: 1.0 % max 6. PACKAGE FORMAT: Jute bag of 80 kg. net weight 7. LOADING FORMAT: 20´ container containing 16 MT of goods or 40´ container containing 25 MT of goods 8. DELIVERY DELAY: Within 15 – 20 days after receipt of purchase confirmation and settlement of payment terms agreed 10. DELIVERY CONDITIONS: FOB or CFR delivery 11. PRICE: According current market rates 12. EXPORT DOCUMENTATION: a. Bill of lading (B/L) b. Commercial invoice c. Packing list d. Origin certificate e. Phytosanitary certificate f. Quality and/or quantity certificate 13. PAYMENT TERMS: To agree

We offer a comprehensive range of services at every stage of the product development process. From the initial ideation stage to detailed manufacturing drawings, we provide the expertise and support needed to turn your ideas into reality. Discover our services today.