Squares - Import export

Square acoustic wood wool is a sound insulation material that has gained a decorative appearance by mixing cement and poplar wood fibers. Acoustic wood panel insulation plates serve as heat shields and protect them from possible fire. As a result of the tests and tests made according to national and international standards, it is determined that the cementitious wood wool insulation board is not flameresistant and that if it is forced, it is burned by ash so as to form smoke with minimum flame effect, does not form flaming drips, does not flow. Square Celenit wood wool is decorative material used in acoustic sound insulation applications, sound insulation works on walls and ceilings. It is also preferred in acoustic environments such as meeting rooms, call centers, conference rooms, and even in mechanical environments. Especially in offices, meeting rooms, etc., you can improve the quality of the business environment

drylin® Q Square linear guides Square section tube made of hard-anodized aluminum Torque resistant without 2nd guidance Tolerates moments up to 10 Nm drylin® Q square section tube drylin® Q - bearing housing, adjustable Carriage version for all unsupported solutions Force absorption from all directions Anti-rotation Clearance is continuously adjustable manually drylin® Q - bearing housing drylin® Q - bearing housing, adjustable with hand clamp Carriage version for all unsupported solutions Force absorption from all directions Anti-rotation Clearance is continuously adjustable manually With manual clamp drylin® Q - bearing housing with manual clamp drylin® Q - housing bearing Q20 enclosed, anodized aluminium housing short design or tandem housing Torque resistant without 2nd guidance drylin® housing bearing Q20 drylin® W - flange bearing Flange pillow block made of anodized aluminum Round flange (01 version), square flange (02 version Standard type or tandem housing Torque resistant without 2nd guidance drylin® W - flange bearing drylin® Q - housing bearing Q10 Solid polymer bearing made of iglidur® J Very light Tolerates moments up to 3 Nm Space saving drylin® Q - housing bearing Q10 drylin® Q - accessory Based on a torque resistant square guide with 7.5 mm edge lengths Hollow chamber for supply lines (media, compressed air,cable) drylin® Q - accessory drylin® Q - gripper axis Toothed, hard-coated and corrosion protected square-hollow profile Move loads up to 500 g at speeds of up to 0.7 m/s Bearing made of iglidur® J Drive: NEMA11 stepper motor with gear wheel drylin® Q - gripper axis Move linear torque resistant, completely lubrication-free. The drylin® Q linear construction kit offers the user maximum flexibility in the design Individual housing options such as solid plastic bearings and adjustable complete housings with and without manual clamp are available. Due to the hollow chamber design, the rugged hard-anodised aluminium profile is very light and is suitable for the simultaneous conducting of supply cables. The mounting options are highly variable, among others, using slot nuts; installation size 20 can also combined with all 20/20 aluminium construction profiles. 1. Profile made of hard-anodized aluminum 2. Main body of the carriage made of aluminum 3. Customized clearance adjustment 4. Cover made of solid plastic 5. Gliding elements in high-performance polymer iglidur® J serve as a guide bearing and guarantee optimum running properties drylin® Q Square linear guides Square section tube made of hard-anodized aluminum Torque resistant without 2nd guidance Tolerates moments up to 10 Nm drylin® Q square section tube drylin® Q - bearing housing, adjustable Carriage version for all unsupported solutions Force absorption from all directions Anti-rotation Clearance is continuously adjustable manually drylin® Q - bearing housing drylin® Q - bearing housing, adjustable with hand clamp Carriage version for all unsupported solutions Force absorption from all directions Anti-rotation Clearance is continuously adjustable manually With manual clamp drylin® Q - bearing housing with manual clamp drylin® Q - housing bearing Q20 enclosed, anodized aluminium housing short design or tandem housing Torque resistant without 2nd guidance drylin® housing bearing Q20 drylin® W - flange bearing Flange pillow block made of anodized aluminum Round flange (01 version), square flange (02 version Standard type or tandem housing Torque resistant without 2nd guidance drylin® W - flange bearing drylin® Q - housing bearing Q10 Solid polymer bearing made of iglidur® J Very light Tolerates moments up to 3 Nm Space saving drylin® Q - housing bearing Q10 drylin® Q - accessory Based on a torque resistant square guide with 7.5 mm edge lengths Hollow chamber for supply lines (media, compressed air,cable) drylin® Q - accessory drylin® Q - gripper axis Toothed, hard-coated and corrosion protected square-hollow profile Move loads up to 500 g at speeds of up to 0.7 m/s Bearing made of iglidur® J Drive: NEMA11 stepper motor with gear wheel drylin® Q - gripper axis

Steel 1.0037. Aluminium EN AW-6060. Version: Steel electro zinc-plated. Aluminium anodised. Note: The machined tolerances of these round and square tubes are individually matched to the tube clamping system. *Square aluminium size 10x10 are only available as solid bars. On request: - Custom cut length (L max. 5000 mm) - Stainless steel tube (L max. 3000 mm)

The lateral clamping screw tightens the jaws and clamps the workpiece on the circumference. The simple and compact design allows 2 workpieces to be clamped. The clamping travel is max. 0.5 mm. The jaws must be pre-tensioned before machining the contour, the supplied clamping ring is used for this purpose.

Stainless steel tubes 1.4301 304L 1.4404 316L 1.4571 316TI, 321, 1.4541 Stainless steel round bars 1.4301 1.4404 1.4571 1.4541 1.4021 1.4006 1.4104 Welded and seamless stainless steel tubes 904L 1.4539 UB6 - Full stainless steel round bars UB6 904L 1.4539 Refractory tubes and round bars 309 1.4828 1.4833 310 310S 1.4841 1.4845- Duplex tubes UNS S31803 1.4462 Super duplex tubes UNS S32750 S32760 1.4410 1.4501 Duplex super duplex full round bars 1.4462 1.4410 1.4501 Stainless steel sheets 1.4301 304L 1.4404 316L 1.4571 316TI, 321, 1.4541 Refractory sheet 309 1.4828 1.4833 310 310S 1.4841 1.4845- Duplex sheets UNS S31803 1.4462 Super duplex sheets UNS S32750 S32760 1.4410 1.4501 Stainless steel sheets UB6 904L 1.4539 Alloy tubes 600; 601; 800; 825 Hastelloy C276 - Tubes and sheets 2.4816; 2.4851; 2.4856; 2.4360 Duplex super duplex stainless steel flanges 904L UB6 1.4539

Stainless steel tubes 1.4301 304L 1.4404 316L 1.4571 316TI, 321, 1.4541 Stainless steel round bars 1.4301 1.4404 1.4571 1.4541 1.4021 1.4006 1.4104 Welded and seamless stainless steel tubes 904L 1.4539 UB6 - Full stainless steel round bars UB6 904L 1.4539 Refractory tubes and round bars 309 1.4828 1.4833 310 310S 1.4841 1.4845- Duplex tubes UNS S31803 1.4462 Super duplex tubes UNS S32750 S32760 1.4410 1.4501 Duplex super duplex full round bars 1.4462 1.4410 1.4501 Stainless steel sheets 1.4301 304L 1.4404 316L 1.4571 316TI, 321, 1.4541 Refractory sheet 309 1.4828 1.4833 310 310S 1.4841 1.4845- Duplex sheets UNS S31803 1.4462 Super duplex sheets UNS S32750 S32760 1.4410 1.4501 Stainless steel sheets UB6 904L 1.4539 Alloy tubes 600; 601; 800; 825 Hastelloy C276 - Tubes and sheets 2.4816; 2.4851; 2.4856; 2.4360 Duplex super duplex stainless steel flanges 904L UB6 1.4539

Housing steel. Cage plastic. Balls steel. Note The linear ball bearings correspond to series 3 of ISO 10285. With doublesided seal. The linear ball bearings have a plastic cage which results in quiet and outstanding running properties. With flange for direct mounting on the housing. Linear ball bearings with doublesided seal should be greased before installation. The specified load ratings apply with the use of hardened and ground shafts. Precision guide shafts 21595. Fastening screws 07160.

Square Bars, hot rolled or forged, tempered, pickled, tol. acc. EN 10059 or DIN 7527 bl.8 grade 1.4057 QT800, 80 mm

Square Bars, hot rolled or forged, tempered, pickled, tol. acc. EN 10059 or DIN 7527 bl.8 grade 1.4057 QT800, 60 mm

Square Bars, hot rolled or forged, tempered, pickled, tol. acc. EN 10059 or DIN 7527 bl.8 grade 1.4057 QT800, 50 mm

Square Bars, hot rolled or forged, tempered, pickled, tol. acc. EN 10059 or DIN 7527 bl.8 grade 1.4057 QT800, 40 mm

Square Bars, hot rolled or forged, tempered, pickled, tol. acc. EN 10059 or DIN 7527 bl.8 grade 1.4057 QT800, 90 mm

Square tube or rectangular tube, welded, ground grit 240, grade 1.4301, 15-15-1.5 mm

Square tube or rectangular tube, welded, grade 1.4301, 20-10-1 mm

Square tube or rectangular tube, welded, ground grit 400, grade 1.4301, 20-10-1.5 mm

Square tube or rectangular tube, welded, grade 1.4301, 15-15-1.5 mm

Square tube or rectangular tube, welded, grade 1.4301, 10-10-1 mm

The Market Square of Brussels is one of the most beautiful squares of Europe and is the central location of our evening program. Welcome by our guide at the Market Square. Meeting point: The Brewers’House. The Brewers’ House is the headquarter of the Belgian Brewers’ association and one of the oldest professional associations in the entire world. The building has been constructed between 1695 and 1698 and is the masterpiece of the architect Wilem De Bruyn and sculptures Marc De Vos and Pieter Van Dievoet. In the cellars of the building we can find the brewers’ museum. 18H00-19H00: visit with our guide of the Market Square and environment where you will admire the most important buildings in Brussels. We do not only visit the Market Square, but also walk along the Stock Exchange, the Mint and Galleries St Hubertus. 19H00-20H00: free visit of the Brewers’ House and tasting of 2 Belgian beers. Our guide/beer specialist gives us in a playful way some explanation during the...

Coloricio can sell steel sections (hollow and open) seam and seamless. The products are made on the basis of good quality steel and meet applicable standards. We use constructional alloy steel and fine grain steel for their production. They are willingly chosen by companies specialising in the building and machine-building industries.

We supply round, square and rectangular Pipes

We supply round, square, hexagonal rectangular bar in a broad range of dimensions .

Aluminium Profiles it is frequently used in : Automotive Industry,Precision engineering, windows , dors , telecommunications , advertising industry , furniture production and others .

Round steel / Square steel, Flat steel , L cornier profile , IPE Steel and much more

Capacity 2550 x 6.35 mm 2 x support arms 1 x Squaring arm Rake adjustment Adjustable back gauge with DRO Interlocked rear guard Weight 4000kgs

These bottles are specially used in the chemical industry. We deliver this kind of bottles with temper evident closures in wide and narrow neck. From 100 ml until 1.000 ml

These jars are made of HDPE and due to their large openings are perfectly suitable for cleanly removing the product. Available in sizes from 100 ml until 2.500 ml