Separators - Import export

Metal separators Pulsotronic have various equipments to offer depending the raw materials wherein metal particules have to be eliminated in order to preserve the production equipment and avoid costly damages to them. Non obstand avoiding costly damages to the production equipment,the separators avoid long stops in the production process as lost of raw materials. The metal separators of Pulsotronic detect and eliminated magnetic and amagnetic particules of very small size in the raw materials before perturbing the production machinery.A very small part of the contaminate raw materials is eliminated beforhand filling the production machine and without stopping the production process . . Detection sensitivity is depending from different parameters and the choice of the equipment as to be defined togheter with the user who as made the choice to spare inexpected costs in his production. Our specialists are working closely with the producer who wish to built in a separator in his...

Filter + filter water separator Sizes: 1/8" and 1/4" Filter fineness: 5 µm + 0.01 µm Flow rate at 6 bar with ∆p 1 bar: 370 Nl / min Pressure range up to 15 bar

The Suvis GmbH also deals with the application of modern numerical methods for the lay out and optimisation of various separator types like cyclones. A typical application of these computation methods is the computer aided investigation of particle separation from gases in cyclones. The prediction of the separation efficiency allows the reliable optimisation of conventional cyclones and the development of completely novel high efficiency cyclones. With that, very often expensive filter units, wet cleaner, or costly electro filters can be replaced or completed. When applying numerical methods (CFD simulations) to cyclones one encounters the problem of strong curvature of the stream lines because of the resulting strong swirl flow and the abrupt change of flow direction towards the outlet tube. This means that the assumption of isotropic turbulence is not useful anymore.

Hydro cyclone units are applied in order to separate coarse and fine solid particles from liquids . These type of separators are particularly capable of separating sand, starch, and other finely distributed materials. With hydro cyclones it is possible to separate fine particles online during the process. Hydro cyclone units are used to separate, classify, and to thicken suspensions. Also, these units are used to purify ores and minerals. Also, in fibre technique and paper industry they are applied in purification processes to separate dirt. Hydro cyclones are frequently run in parallel mode. The lay out and design of hydro cyclones are performed empirically similar to the duct cyclones. In the lower flow region of a hydro cyclone an air swirl forms during the separation process, which is not substantially influencing the cyclone flow. Because of the large dimension of the cyclone, wall friction has much more influence on the flow.

The gas cyclone belongs to the mostly applied technical separators, because it has applicationwise some fundamental advantages. One of them is certainly the fact that its construction does not show any movable components. For the large variety of different kinds of dispersed (particulate) phases (for example dust particles, metal chips, wooden waste, liquid droplets) and different gas conditions (pressure, temperature) the lay out and computation of a cyclone is still a complex task. Suvis has specialised in the development and lay out of cyclone separators and can offer professional solutions and consulting in the area of gas cyclones. Many years of experience gained through numerous cyclone development projects results in optimal solutions for our customers. A cyclone separator applies centrifugal forces and represents an effective apparatus for separating gas, liquid or solid particles from a continuous phase in chemical, process or environmental engineering.

Fasten the floating clamp to the fixture with the M12 screw. Adjust the height stop and the swivel range using the blue sleeve and lock with the 3x2.5 mm grub screws. When setting the height leave generous clearance above. For safe operation the M12 tapped hole must always be closed. For specific clamping applications the standard jaws can be altered or replaced. Form B: Fasten the floating clamp with M6 fastening holes to a fixture. Adjust the height stop and pivot range using the blue adjusting sleeve and clamp with grub screws (4x AF 2.5). When setting the height limit, allow ample play at the top. For specific clamping situations, the standard jaw plates can be modified or replaced.

Water Separator WA Connect. G1/2 ... G11/2 application with wet or moist surfaces

Telescopic Rail 35.2 x 19 mm, Galvanized Steel, Standard Lengths up to 660 mm, Load Capacity up to 52 kg per Pair Ball Bearing Over-extension Load Capacity up to 52 kg per Pair Standard Rail Length up to 660 mm Separable Inner Rail Locking in Open Position Closed End Stop Manufactured in the European Union For over 40 years, Schock Group has been developing and manufacturing ball bearing telescopic rails for linear motion technology. The advantageous physical properties of ball bearing guides form the basis for the performance of Schock telescopic rails: Smooth and quiet operation, even under high loads. High functional reliability Long service life without maintenance Standard items in the specified lengths are available from our distribution partner SToxxparts GmbH in stock and from a quantity of one piece upwards.

Ball bearing partial extension slides with a 70-80% extension length Load capacity up to 56 kg per pair Standard rail length up to 660 mm Separable inner rail Locking in the open position Closed end stop Manufactured in the European Union For over 40 years, the Schock Group has been developing and manufacturing ball bearing telescopic slides for linear motion technology. The advantageous physical properties of ball guidance form the basis for the performance of Schock telescopic slides: Smooth and quiet operation, even under high loads. High operational reliability Long service life without maintenance Standard items in the specified lengths are available in stock from our distribution partner SToxxparts GmbH, starting from a quantity of one piece. Custom solutions are available through Schock Metall on a project-specific basis. We look forward to receiving your project inquiry, including your annual requirements and anticipated start date for production.

Telescopic Rail 45 x 12.7 mm, Galvanized Steel, Standard Lengths up to 600 mm, Load Capacity up to 40 kg per pair Full Extension Ball Bearing Guide Load Capacity up to 40 kg per pair Standard Rail Length up to 600 mm Separable Inner Rail The Schock Group has been developing and manufacturing ball-bearing telescopic rails for linear motion technology for over 40 years. The advantageous physical properties of ball bearing guides form the basis for the performance of Schock telescopic rails: Smooth and quiet operation, even under heavy load. High operational reliability Long lifespan without maintenance Standard items in the specified lengths are available from our distribution partner SToxxparts GmbH from stock, and they can be ordered from a quantity of one piece. Custom solutions are available from Schock Metall on a project-specific basis. We welcome your project inquiry, including your annual requirement and expected start date for production.

Separation of dissolved gases with membrane degasification Gaseous components can be removed by conventional technologies, like e.g. percolators columns (for example CO2-percolators). Alternatively, gaseous components in water can be removed with very high retention rates by membrane degasification, which is working with hydrophobic membranes and a partial pressure drop. The advantages of the membrane degasification are low operation costs as well a s compact design.

Oil-water-separation / degreasing bath treatment Treatment of oil-water-emulsions for surface treatment (e.g. pre-treatment of metal parts for ed-paint), recovery companies (e.g. for the treatment of alkaline emulsions for part washing), and so on. Separation of emulgated oil particles and recycling of the cleaned liquid into the degreasing bath Concentration of oil-water-emulsions for disposal Cleaning of the oil-water-mixture for indirect lead-in Principle of this process: Aqueous degreasing baths content a tenside combination, alkalines like soda, caustic soda, phosphate, silicate and further complex molecules. The degreasing bath is loosing its efficiency, when to oil content reaches some g / litre. External pollutions also degrease the degreasing efficiency. By ultrafiltration, the oil content can be separated from the degreasing bath and the oil will be collected in the concentrate. The degreasing bath will be dumped into a buffer tank and then pumped in the working tank of the

Centrifugal Concentrator with floating bed model 110 is designed for high-quality gravity concentration of fine material (sand and alluvial deposits of crushed ore) containing free gold, silver and platinum, in the industrial extraction of small and fine fractions of precious metals and other heavy valuable minerals. Performance on hard, kg / h: - 200. Gold recovery of size, % +50 microns 96- 99 + 10-50 microns 92-96 + 3-10 microns, 50-92

Centrifugal concentrator is designed for high-quality gravity concentration of fine material (sand and alluvial deposits of crushed ore) containing free gold, silver and platinum, in the industrial extraction of small and fine fractions of precious metals and other heavy valuable minerals.

This model of Centrifugal Concentrator is designed for high-quality gravity concentration of fine material (sand and alluvial deposits of crushed ore) containing free gold, silver and platinum, in the industrial extraction of small and fine fractions of precious metals and other heavy valuable minerals. Performance on hard, kg / h: - 1000. Gold recovery of size, % +50 microns 96-99 + 10-50 microns 92-96 + 3-10 microns 50-92

The centrifugal concentrators a various productivity with a floating bed are designed for high-quality gravity concentration of fine-grained material (alluvial sands and crushed ores) containing free gold, silver and platinum, in the industrial extraction of fine and fine fractions of noble metals and other heavy valuable minerals.

This allows us to store a wide variety of product types and product groups, from different raw materials to various products for fulfilment.