Screws for plastics - Import export

Delivery program: Plastic Screws From M3 x 20 mm to M10 x 60 mm. Plastic Knurled screws DIN 653 from M3. Plastic Transverse-hole screws DIN 404 from M3 x 20 mm. Plastic Nuts From M3 Plastic Threaded pins DIN 551 from M3 Connection elements Other connection elements such as discs, caps, spacers and diverse articles moulded from all commercially available plastics (granulate). All articles are available with the specifications listed next. Materials: Articles moulded from PA, POM and all other plastics (granulate) commonly available on the market. Standards: According to DIN/EN/ISO or drawings. Colour: According to RAL table or individual customer wishes.

PT screws for thermoplastics: Thread rolling screws for direct screwing into plastics, Thread 30° or 60° KTG screws for thermoplastics: Single-start or double-start thread (high, low) Thread rolling screws are extruded for larger batch sizes and turned for small batch sizes (Turned parts for direct screwing) High tensile and highly stressable connection of thermoplastics with considerably longer life endurance Thread rolling without chips and loss of material Minimum radial tension, large thread coverage Process-reliable due to torsion strength Shorter and slimmer screws are possible. Materials: Steel, case-hardened Quenched and tempered steel 1.5523 tempered to 1000 +200 N/mm², high-grade steel 1.4567, other materials on request Length: 3 – 160 mm (at lengths from 60 mm only partial thread lengths 4 x d are possible) Thread diameter: 1.6 – 10 mm Special dimensions on request Batch sizes: Standard ex-stores Special screws from 30,000 pieces

Self-tapping screw for fastening, connecting sheet metal and metal profiles up to 2 mm Head: hemispherical with press washer, Philips No2 slot, M = 4.5-5.1

Metric: Screws from M2 x 10 – M30 x 1000 with thread (up to 100 mm long). Compliant with DIN, EN, ISO, or according to drawings and samples. Plates: From ST 2.9 x 19 – ST 6.3 x 160 / 80 mm with thread (up to 80 mm long). Compliant with DIN, EN, ISO, or according to drawings and samples. KTG screws for plastics: 30-degree thread (OEB Kunst). KTG 3 x 10 mm – KTG 8 x 160 mm with thread (up to 60 mm long). DIN 7500 thread grooving screws: For die casting, zinc or aluminium. M3 x 20 – M10 x 160 mm with thread (up to 50-60 mm long) (OEB Furch). DIN 7513 – DIN 7516 thread cutting screws: For die casting, zinc or aluminium. M3 x 20 – M10 x 160 mm with thread (up to 50-60 mm long) (OEB Schneid). Other thread types: With-Worth, HiLo, UNC/UNF, double-start, triple-start.

The economic adjustment to small batch sizes, we meet with our turned parts for the direct assembly in plastics and die-cast products. Any thread forms such as, thread-tapping (DIN7500), thread cutting (DIN 7513-7516) or KTG for direct screw in plastics are realized cost-effectively. Advantage is the elimination of high tooling costs, since no counter-thread in the workpiece (eg threaded inserts, nuts, etc.) is required because the direct assembly takes place directly into the workpiece. Only a given tube is required in order to screw it directly. Our turned parts replace previously cold formed parts used (so-called multi-station presses) which require high output volumes in order to achieve a reasonable price parts.

Tensioner Vesconite® plastic. Screw and nut steel. Version Screw ISO 4017, grade 8.8, electro zincplated. Nut ISO 4035, grade 8, electro zincplated. Note For tensioning roller chains. The chain tensioner set can be combined with all tensioning elements to form a readytoinstall chain clamp. The symmetrical design enables use on both sides. Large radii ensure very quiet running. The highquality plastic does not require any lubrication. The maximum chain speed should not exceed 1.5 m/s in continuous use.

Housing fibreglass reinforced thermoplastic polyamide. Sight glass thermoplastic polyamide. O-ring and flat seal NBR. Reflector PVC. Float plastic. Screw and nut, steel. Version: Housing black. Sight glass crystal clear, high mechanical stability, non-ageing. Reflector white. Float red, with magnetic element. Screw and nut electro zinc-plated. Note: The oil level gauge not only enables the oil level to be viewed but also recorded using a REED switch. In addition, the oil level gauges can also emit an electric signal if the temperature of the liquid inside the container reaches the threshold of 70 °C. As soon as the float element approaches the selected minimum value after the circuit has been closed, the system emits an electric signal. The sensor is located on the housing and its height can be adjusted in line with the control requirements for the oil level. The minimum level is ca. 35 mm from the centre of the lower fastening screw.

Aluminum tube 400ml Aluminum tube, turnable, with plastic screw connections at front and back Suitable for 310 or 400ml 1K cartridges or sausage packs Application example: kitchen and bathroom tile joints, acrylic joint adhesive… Lithium-ion battery pack with 3.6V // 1.5AH with LED charge indicator Rapid charger with battery charge and status indicator, charging time approx. 30 minutes Supplied in transport case Drive Extrusion power 3000N (300kg) Extrusion rate with speed control 50 – 330mm/min Automatic pressure reduction to avoid chemical materials drops out. Performance: 30 cartridges of 310ml Silicone for a fully charged battery at room temperature. Benefits Continuous and clean work. Less fatigue while processing high viscosity adhesives. Automatic pressure reduction to avoid chemical materials drops out. Free of annoying air tube or electric cable on working place. Charger: IP30 // Class 2 Input: 100 – 240 V ~ 50/60Hz 30W Output: 3.6V A 2A CE checked and GS proved Packaging Dyn