Add my company Get multiple quotes Log in
  • europages
  • >
  • COMPANIES - SUPPLIERS - SERVICE PROVIDERS
  • >
  • rail supports

Results for

Rail supports - Import export

Service Provider
94 Companies 39 Products

Belgium

The elastic track application "Railflex" for crossing levels is characterized by a complete rail insulation carried out thaks to an application on continuous elastic boot and an elastomer rail clamps fixing. Therefore, the direct contact between the rail and its steel support is avoided. Main assets of elastic material: -Very high ability to support loads -Very high ability to put power into store and to clear it -Excellent tiredness endurance within the framework of repeated use -High strength to impacts, even under negative temperatures -Good strength to chemical agents and humidity -Very high strength to cuts and abrasion -Excellent maintenance of the specifications during time (not much ageing) The Railflex system is acting bith dynamically and kinematically. 1. DYNAMIC : The vibrations due to the wheel rolling on the rail are filtered by the elastomer supports and their transmission to foundations is reduced thanks to the absorbing effect of the insulating material. The foundation is less in demand, its deterioration is slowed or stopped. Moreover, as the rail is supported elastically, the dynamic impact ratio (wheel on rail) is lowered, the wheel is less "agressive" towards rail which lead to a reduction of the wheels and rails wear. 2. KINEMATIC : When a rail fixed accordingly the Railflex system is subjected to a transverse use at rail top level, the rail moves a little bit aside while it bows down lightly. This rails over-gap changes the kinematic conditions of the naturally curved axle's position effect and a more energetic return to the middle of the track in straight line. These effects are also very favorable to the reduction of wheels and rail wear. Adjustment of the « RAILFLEX » system to road crossing. Description : - The system described hereafter offers the following assets : quickness of implementation thanks to a maximum prefabrication ; quick implementation of railroad and road traffic ; easiness of rail substitution without road destruction ; no maintenance. - The rails are put down on 2 steel gutters. - The 2 steel gutters are linked together through streamlines. - The "gutters/streamlines" set makes up a stiff frame of which the length is variable according to the needs. - A wire grill is welded between the 2 gutters inner faces as well as the outside in order to set up a framework for the material which will be implemented for the finishing works of the level crossing (concrete, sand,...). - The metallic frames are protected against rust. - The frames are put in the gutters on a reinforced elastic boot and are fixed with elastomer rail clamps. Conceivable options : - According to the customers requests, an electric insulation of the 2 tracks can be considered. - The system can be planned for straight sections as well as curves. In this case, a guard rail can be intended for the faint radius curves. The guard rail is also completely separated from the metallic frame, so from the foundation through supports and elastomer washers. - The system can be implemented for different types of rails. - The gap between the rail and the gutters inner faces is filled as following : in the gutter's bottom, a small grading gravel is poured on a 80 cm height. The higher volume is filled with a suitable industrial foam. If necessary, a water harvest device at the level crossings both ends can be suggested. The both ends can be adapted to the layout of the premises. At the level crossings both ends, a protection device against the coupler is planned. Application : - The frames are put down on the bottom of tracks form. - The frames are leveled and brung into line with the track. - The set is concreted (quick setting concrete)

Request for a quote

Serbia

We deliver your cargo safely, securely and on time anywhere in the world by air, sea, road and rail. And we support all your warehousing needs.

Request for a quote

Germany

Product description Shaft support rail SMTSU-16-600, with drills in high-quality from our production made in germany Product data shaft support: Attention: this is the rail support only in the length 600mm (no shaft!) Dimensions: Type Ø d h +/- 0,15 H1 A A1 W M Ød1 e T weight./kg* SMTSU-16-600 16 18 3 14 7,0 7,0 M5 5,5 16,0 75 0,56 *weight in the table it relates to a rail with length 600mm without shaft. depending on the length of the shaft support rail unit, the rail is composed of several individual section material of shaft support: Aluminium

Germany

Product description Shaft support rail SMTSN 16-T2-600, with drills in 1A-quality from our production made in germany Product data shaft support: Attention: this is the rail support only in the length 600mm (no shaft!) Dimensions: Type d A h +/- 0,02 V N1 N2 d1 d2 W (°) E T weight./kg* SMTSN-16-T2-600 16 45 26 5 9,5 6,0 5,5 5,5 7,0 50 33 150 0,64 *weight in the table it relates to a rail with length 600mm without shaft. depending on the length of the shaft support rail unit, the rail is composed of several individual section material of shaft support: Aluminium

Germany

Product description Shaft support rail SMTSU-12-600, with drills in high-quality from our production made in germany Product data shaft support: Attention: this is the rail support only in the length 600mm (no shaft!) Dimensions: Type Ø d h +/- 0,15 H1 A A1 W M Ød1 e T weight./kg* SMTSU-12-600 12 14,5 3 11 6,0 5,4 M4 4,5 15,5 75 0,44 *weight in the table it relates to a rail with length 600mm without shaft. depending on the length of the shaft support rail unit, the rail is composed of several individual section material of shaft support: Aluminium

Germany

Product description Shaft support rail SMTSN 12-T2-600, with drills in high-quality +/- 0,02mm from our production made in germany Product data shaft support: Attention: this is the rail support only in the length 600mm (no shaft!) Dimensions: Type d A h +/- 0,02 V N1 N2 d1 d2 W (°) E T weight./kg* SMTSN-12-T2-600 12 40 22 5 8,0 5,0 4,5 4,5 5,8 50 29 120 0,52 *weight in the table it relates to a rail with length 600mm without shaft. depending on the length of the shaft support rail unit, the rail is composed of several individual section material of shaft support: Aluminium

Germany

Product description Shaft support rail SMTSN 12-T1-600, with drills in high-quality +/- 0,02mm from our production made in germany Product data shaft support: Attention: this is the rail support only in the length 600mm (no shaft!) Dimensions: Type d A h +/- 0,02 V N1 N2 d1 d2 W (°) E T weight./kg* SMTSN-12-T1-600 12 40 22 5 8,0 5,0 4,5 4,5 5,8 50 29 75 0,52 *weight in the table it relates to a rail with length 600mm without shaft. depending on the length of the shaft support rail unit, the rail is composed of several individual section material of shaft support: Aluminium

Germany

Product description Shaft support rail SMTSN 12-G1-600-UG, without drills in 1A-quality from our production made in germany Product data shaft support: Attention: this is the rail support only in the length 600mm (no shaft!) Dimensions: Type d A h +/- 0,02 V N1 N2 d1 d2 W (°) E T weight./kg* SMTSN-12-G1-600-UG 12 40 22 5 8,0 5,0 5,8 50 0,52 *weight in the table it relates to a rail with length 600mm without shaft. depending on the length of the shaft support rail unit, the rail is composed of several individual section material of shaft support: Aluminium

Germany

Product description Shaft support rail SMTSN 16-G1-600, without drills in 1A-quality from our production made in germany Product data shaft support: Attention: this is the rail support only in the length 600mm (no shaft!) Dimensions: Type d A h +/- 0,02 V N1 N2 d1 d2 W (°) E T weight./kg* SMTSN-16-G1-600-UG 16 45 26 5 9,5 6,0 7,0 50 0,64 *weight in the table it relates to a rail with length 600mm without shaft. depending on the length of the shaft support rail unit, the rail is composed of several individual section material of shaft support: Aluminium

Germany

Product description Shaft support rail SMTSN 16-T1-600, with drills in 1A-quality from our production made in germany Product data shaft support: Attention: this is the rail support only in the length 600mm (no shaft!) src="images/Skizze%20SMTSN.JPG" /> Dimensions: Type d A h +/- 0,02 V N1 N2 d1 d2 W (°) E T weight./kg* SMTSN-16-T1-600 16 45 26 5 9,5 6,0 5,5 5,5 7,0 50 33 100 0,64 *weight in the table it relates to a rail with length 600mm without shaft. depending on the length of the shaft support rail unit, the rail is composed of several individual section material of shaft support: Aluminium

Germany

Product description Track roller guidance system SMLFS-52 here: flat version without holes Order process: Please choose one of the following, above the "add to cart" button in the right top corner of this page: 1.) needed length of the rail (grouped by 100mm) 2.) needed block (1 or 2 pcs per rail, more blocks please request) 3.) set the needed quantity of systems The right price for the complete systems you can see now. 4.) The excat required length of the unit please enter in the bottom field. If you give us no note there, we supply automatically the maximum length of this article. 5.) Please takes your notes for wished dimension "T5" (the first and the last distance to the middle of holes). If you give us no note there, we supply automatically the middle of arithmetically for a minimum of 10mm. for example: 20/20 6.) If you like, give us further notes for technical refernces in the field "notes". load technical data Carriage SMLFL load technical data Track rollers and bolts Technical data SMLFS-52:

Germany

Product description Track roller guidance system SMLFS-32 here: flat version without holes Order process: Please choose one of the following, above the "add to cart" button in the right top corner of this page: 1.) needed length of the rail (grouped by 100mm) 2.) needed block (1 or 2 pcs per rail, more blocks please request) 3.) set the needed quantity of systems The right price for the complete systems you can see now. 4.) The excat required length of the unit please enter in the bottom field. If you give us no note there, we supply automatically the maximum length of this article. 5.) Please takes your notes for wished dimension "T5" (the first and the last distance to the middle of holes). If you give us no note there, we supply automatically the middle of arithmetically for a minimum of 10mm. for example: 20/20 6.) If you like, give us further notes for technical refernces in the field "notes". load technical data Carriage SMLFL load technical data Track rollers and bolts Technical data SMLFS-32:

Germany

Product description Shaft support rail unit SMTSU 12-W length precisely lengths to the millimetre, choosable up to 6000mm, with rail in aluminium and shaft in hardened, quality: stainless steel X46Cr13 (1.4034) This system you can combined with all open (look the "o" in the name of article) housing units, see categorie: http://lineareasy.com.de/shop/index.php/cat/c12_Gehaeuseeinheiten.html Urgent notes for order: The excat required length of the unit please enter in the bottom field. If you give us no note there, we supply automatically the maximum length of this article. The type SMTSU will be not mounted !. Product data unit: Abmessungen: Type Ød h +/-0,15 H1 A A1 W M Ød1 e T Gew./kg* SMTSU-12 12 14,5 3 11 6,0 5,4 M4 4,5 15,5 75 0,44 *weight in the table it relates to a rail with length 600mm without shaft. depending on the length of the shaft support rail unit, the rail is composed of several individual section T5 min = 20mm the weight of the unit you´ll see down on this side material of shaft support: Aluminium Product data shaft: Material shaft: stainless steel X46Cr13 Hardened: 52-56 HRC Rht min.0,6 Grounded Tol. h6 (0-11my) Surface roughness: Ra <= 0,3 Weight (shaft only): 0,89kg/m Straightness:0,2mm/m Predrilled: see the table Chamfer: on both sides of the shaft appr. 1 - 2mm x 30° (depending the diameter of the shaft)

Germany

Product description Shaft support rail unit SMTSU 12-W length precisely lengths to the millimetre, choosable up to 6000mm, with rail in aluminium and shaft in hardened, quality: Cf53 (1.1213) This system you can combined with all open (look the "o" in the name of article) housing units, see categorie: http://lineareasy.com.de/shop/index.php/cat/c12_Gehaeuseeinheiten.html Urgent notes for order: The excat required length of the unit please enter in the bottom field. If you give us no note there, we supply automatically the maximum length of this article. The type SMTSU will be not mounted !. Product data unit: Dimensions: Type Ød h +/-0,15 H1 A A1 W M Ød1 e T Gew kg SMTSU-12 12 14,5 3 11 6,0 5,4 M4 4,5 15,5 75 0,44 *weight in the table it relates to a rail with length 600mm without shaft. depending on the length of the shaft support rail unit, the rail is composed of several individual section T5 min = 20mm the weight of the unit you´ll see down on this side material of shaft support: Aluminium Product data shaft: Material shaft: Cf53 Hardened: 59-65 HRC Rht min.0,6 Grounded Tol. h6 (0-11my) Surface roughness: Ra <= 0,3 Weight (shaft only): 0,89kg/m Straightness:0,2mm/m Predrilled: see the table Chamfer: on both sides of the shaft appr. 1 - 2mm x 30° (depending the diameter of the shaft)

Germany

Product description Shaft support rail unit SMTSN 12-T2-WV length precisely lengths to the millimetre, choosable up to 6000mm, with rail in aluminium and shaft in hardened, quality: Cf53-chrome plated (1.1213) This system you can combined with all open (look the "o" in the name of article) housing units, see categorie: http://lineareasy.com.de/shop/index.php/cat/c12_Gehaeuseeinheiten.html Urgent notes for order: The excat required length of the unit please enter in the bottom field. If you give us no note there, we supply automatically the maximum length of this article. The type SMTSN we deliver assembled to you. Product data unit: Dimensions: Type d A h +/- 0,15 V N1 N2 d1 d2 W (°) E T weight./kg* SMTSN-12 12 40 22 5 8,0 5,0 4,5 4,5 5,8 50 29 120 0,52 *weight in the table it relates to a rail with length 600mm without shaft. depending on the length of the shaft support rail unit, the rail is composed of several individual section T5 min = 20mm the weight of the unit you´ll see down on this side material of shaft support: Aluminium Product data shaft: Material shaft: Cf53-chrome plated Chrome layer thickness: ca. 10 my Chrome layer hardness: >= 800HV Hardened: 59-65 HRC Rht min.0,6 Grounded Tol. h7 (0-18my) Surface roughness: Ra <= 0,3 Weight (shaft only): 0,89kg/m Straightness:0,2mm/m Predrilled: see the table Chamfer: on both sides of the shaft appr. 1 - 2mm x 30° (depending the diameter of the shaft)

Germany

Product description Shaft support rail unit SMTSN 12-T2-W length precisely lengths to the millimetre, choosable up to 6000mm, with rail in aluminium and shaft in hardened, quality: stainless steel X46Cr13 (1.4034) This system you can combined with all open (look the "o" in the name of article) housing units, see categorie: http://lineareasy.com.de/shop/index.php/cat/c12_Gehaeuseeinheiten.html Urgent notes for order: The excat required length of the unit please enter in the bottom field. If you give us no note there, we supply automatically the maximum length of this article. The type SMTSN we deliver assembled to you. Product data unit: Dimensions: Type d A h +/- 0,15 V N1 N2 d1 d2 W (°) E T weight./kg* SMTSN-12 12 40 22 5 8,0 5,0 4,5 4,5 5,8 50 29 120 0,52 *weight in the table it relates to a rail with length 600mm without shaft. depending on the length of the shaft support rail unit, the rail is composed of several individual section T5 min = 20mm the weight of the unit you´ll see down on this side material of shaft support: Aluminium Product data shaft: Material shaft: stainless steel X46Cr13 Hardened: 52-56 HRC Rht min.0,6 Grounded Tol. h6 (0-11my) Surface roughness: Ra <= 0,3 Weight (shaft only): 0,89kg/m Straightness:0,2mm/m Predrilled: see the table Chamfer: on both sides of the shaft appr. 1 - 2mm x 30° (depending the diameter of the shaft)

Germany

Product description Shaft support rail unit SMTSN 12-T1-WV length precisely lengths to the millimetre, choosable up to 6000mm, with rail in aluminium and shaft in hardened, quality: Cf53-chrome plated (1.1213) This system you can combined with all open (look the "o" in the name of article) housing units, see categorie: http://lineareasy.com.de/shop/index.php/cat/c12_Gehaeuseeinheiten.html Urgent notes for order: The excat required length of the unit please enter in the bottom field. If you give us no note there, we supply automatically the maximum length of this article. The type SMTSN we deliver assembled to you. Product data unit: Dimensions: Type d A h +/- 0,15 V N1 N2 d1 d2 W (°) E T weight./kg* SMTSN-12 12 40 22 5 8,0 5,0 4,5 4,5 5,8 50 29 75 0,52 *weight in the table it relates to a rail with length 600mm without shaft. depending on the length of the shaft support rail unit, the rail is composed of several individual section T5 min = 20mm the weight of the unit you´ll see down on this side material of shaft support: Aluminium Product data shaft: Material shaft: Cf53-chrome plated Chrome layer thickness: ca. 10 my Chrome layer hardness: >= 800HV Hardened: 59-65 HRC Rht min.0,6 Grounded Tol. h7 (0-18my) Surface roughness: Ra <= 0,3 Weight (shaft only): 0,89kg/m Straightness:0,2mm/m Predrilled: see the table Chamfer: on both sides of the shaft appr. 1 - 2mm x 30° (depending the diameter of the shaft)

Do you sell or make similar products?

Sign up to europages and have your products listed

Add my business

Germany

Product description Shaft support rail unit SMTSN 12-T2-W length precisely lengths to the millimetre, choosable up to 6000mm, with rail in aluminium and shaft in hardened, quality: Cf53 (1.1213) This system you can combined with all open (look the "o" in the name of article) housing units, see categorie: http://lineareasy.com.de/shop/index.php/cat/c12_Gehaeuseeinheiten.html Urgent notes for order: The excat required length of the unit please enter in the bottom field. If you give us no note there, we supply automatically the maximum length of this article. The type SMTSN we deliver assembled to you. Product data unit: Dimensions: Type d A h +/- 0,15 V N1 N2 d1 d2 W (°) E T weight./kg* SMTSN-12 12 40 22 5 8,0 5,0 4,5 4,5 5,8 50 29 120 0,52 *weight in the table it relates to a rail with length 600mm without shaft. depending on the length of the shaft support rail unit, the rail is composed of several individual section T5 min = 20mm the weight of the unit you´ll see down on this side material of shaft support: Aluminium Product data shaft: Material shaft: Cf53 Hardened: 59-65 HRC Rht min.0,6 Grounded Tol. h6 (0-11my) Surface roughness: Ra <= 0,3 Weight (shaft only): 0,89kg/m Straightness:0,2mm/m Predrilled: see the table Chamfer: on both sides of the shaft appr. 1 - 2mm x 30° (depending the diameter of the shaft)

Germany

Product description Shaft support rail unit SMTSN 12-T1-W length precisely lengths to the millimetre, here choosable up to 6000mm, with rail in aluminium and shaft in hardened, quality: Cf53 (1.1213) This system you can combined with all open (look the "o" in the name of article) housing units, see categorie: http://lineareasy.com.de/shop/index.php/cat/c12_Gehaeuseeinheiten.html Urgent notes for order: The excat required length of the unit please enter in the bottom field. If you give us no note there, we supply automatically the maximum length of this article. The type SMTSN we deliver assembled to you. Product data unit: Dimensions: Type d A h +/- 0,15 V N1 N2 d1 d2 W (°) E T weight./kg* SMTSN-12 12 40 22 5 8,0 5,0 4,5 4,5 5,8 50 29 75 0,52 *weight in the table it relates to a rail with length 600mm without shaft. depending on the length of the shaft support rail unit, the rail is composed of several individual section T5 min = 20mm the weight of the unit you´ll see down on this side material of shaft support: Aluminium Product data shaft: Material shaft: Cf53 Hardened: 59-65 HRC Rht min.0,6 Grounded Tol. h6 (0-11my) Surface roughness: Ra <= 0,3 Weight (shaft only): 0,89kg/m Straightness:0,2mm/m Predrilled: see the table Chamfer: on both sides of the shaft appr. 1 - 2mm x 30° (depending the diameter of the shaft)

Germany

Product description Track roller guidance system SMLFS-52 here: flat version with holes Order process: Please choose one of the following, above the "add to cart" button in the right top corner of this page: 1.) needed length of the rail (grouped by 100mm) 2.) needed block (1 or 2 pcs per rail, more blocks please request) 3.) set the needed quantity of systems The right price for the complete systems you can see now. 4.) The excat required length of the unit please enter in the bottom field. If you give us no note there, we supply automatically the maximum length of this article. 5.) Please takes your notes for wished dimension "T5" (the first and the last distance to the middle of holes). If you give us no note there, we supply automatically the middle of arithmetically for a minimum of 10mm. for example: 20/20 6.) If you like, give us further notes for technical refernces in the field "notes". load technical data Carriage SMLFL load technical data Track rollers and bolts Technical data SMLFS-52:

Germany

Product description Track roller guidance system SMLFS-32 here: flat version with holes Order process: Please choose one of the following, above the "add to cart" button in the right top corner of this page: 1.) needed length of the rail (grouped by 100mm) 2.) needed block (1 or 2 pcs per rail, more blocks please request) 3.) set the needed quantity of systems The right price for the complete systems you can see now. 4.) The excat required length of the unit please enter in the bottom field. If you give us no note there, we supply automatically the maximum length of this article. 5.) Please takes your notes for wished dimension "T5" (the first and the last distance to the middle of holes). If you give us no note there, we supply automatically the middle of arithmetically for a minimum of 10mm. for example: 20/20 6.) If you like, give us further notes for technical refernces in the field "notes". load technical data Carriage SMLFL load technical data Track rollers and bolts Technical data SMLFS-32:

Germany

Product description Track roller guidance system SMLFS-52-U here: without holes in the Rail! Order process: Please choose one of the following, above the "add to cart" button in the right top corner of this page: 1.) needed length of the rail (grouped by 100mm) 2.) needed block (1 or 2 pcs per rail, more blocks please request) 3.) set the needed quantity of systems The right price for the complete systems you can see now. 4.) The excat required length of the unit please enter in the bottom field. If you give us no note there, we supply automatically the maximum length of this article. 5.) If you like, give us further notes for technical refernces in the field "notes". load technical data Carriage SMLFL load technical data Track rollers and bolts Technical data SMLFS-52:

Germany

Product description Track roller guidance system SMLFS-32-U here: without holes in the Rail ! Order process: Please choose one of the following, above the "add to cart" button in the right top corner of this page: 1.) needed length of the rail (grouped by 100mm) 2.) needed block (1 or 2 pcs per rail, more blocks please request) 3.) set the needed quantity of systems The right price for the complete systems you can see now. 4.) The excat required length of the unit please enter in the bottom field. If you give us no note there, we supply automatically the maximum length of this article. 5.) If you like, give us further notes for technical refernces in the field "notes". load technical data Carriage SMLFL load technical data Track rollers and bolts Technical data SMLFS-32:

Germany

Product description Track roller guidance system SMLFS-25-U here: without holes in the rail! Order process: Please choose one of the following, above the "add to cart" button in the right top corner of this page: 1.) needed length of the rail (grouped by 100mm) 2.) needed block (1 or 2 pcs per rail, more blocks please request) 3.) set the needed quantity of systems The right price for the complete systems you can see now. 4.) The excat required length of the unit please enter in the bottom field. If you give us no note there, we supply automatically the maximum length of this article. 5.) If you like, give us further notes for technical refernces in the field "notes". load technical data Carriage SMLFL load technical data Track rollers and bolts Technical data SMLFS-25:

Germany

Track roller guidance system SMLFS-20-U here: without holes in the rail ! Order process: Please choose one of the following, above the "add to cart" button in the right top corner of this page: 1.) needed length of the rail (grouped by 100mm) 2.) needed block (1 or 2 pcs per rail, more blocks please request) 3.) set the needed quantity of systems The right price for the complete systems you can see now. 4.) The excat required length of the unit please enter in the bottom field. If you give us no note there, we supply automatically the maximum length of this article. 5.) If you like, give us further notes for technical refernces in the field "notes". load technical data Carriage SMLFL load technical data Track rollers and bolts Technical data SMLFS-20: Data carriage

Germany

Track roller guidance system SMLFS-52 Order process: Please choose one of the following, above the "add to cart" button in the right top corner of this page: 1.) needed length of the rail (grouped by 100mm) 2.) needed block (1 or 2 pcs per rail, more blocks please request) 3.) set the needed quantity of systems The right price for the complete systems you can see now. 4.) The excat required length of the unit please enter in the bottom field. If you give us no note there, we supply automatically the maximum length of this article. 5.) Please takes your notes for wished dimension "T5" (the first and the last distance to the middle of holes). If you give us no note there, we supply automatically the middle of arithmetically for a minimum of 10mm. for example: 20/20 6.) If you like, give us further notes for technical refernces in the field "notes". Technical data SMLFS-52: Data carriage Data track roller and bolts

Germany

Track roller guidance system SMLFS-32 Order process: Please choose one of the following, above the "add to cart" button in the right top corner of this page: 1.) needed length of the rail (grouped by 100mm) 2.) needed block (1 or 2 pcs per rail, more blocks please request) 3.) set the needed quantity of systems The right price for the complete systems you can see now. 4.) The excat required length of the unit please enter in the bottom field. If you give us no note there, we supply automatically the maximum length of this article. 5.) Please takes your notes for wished dimension "T5" (the first and the last distance to the middle of holes). If you give us no note there, we supply automatically the middle of arithmetically for a minimum of 10mm. for example: 20/20 6.) If you like, give us further notes for technical refernces in the field "notes". Technical data SMLFS-32: Data carriage Data track roller and bolts

Germany

Track roller guidance system SMLFS-25 Order process: Please choose one of the following, above the "add to cart" button in the right top corner of this page: 1.) needed length of the rail (grouped by 100mm) 2.) needed block (1 or 2 pcs per rail, more blocks please request) 3.) set the needed quantity of systems The right price for the complete systems you can see now. 4.) The excat required length of the unit please enter in the bottom field. If you give us no note there, we supply automatically the maximum length of this article. 5.) Please takes your notes for wished dimension "T5" (the first and the last distance to the middle of holes). If you give us no note there, we supply automatically the middle of arithmetically for a minimum of 10mm. for example: 20/20 6.) If you like, give us further notes for technical refernces in the field "notes". Technical data SMLFS-25: Data carriage Data track roller and bolts

Germany

Track roller guidance system SMLFS-20 Order process: Please choose one of the following, above the "add to cart" button in the right top corner of this page: 1.) needed length of the rail (grouped by 100mm) 2.) needed block (1 or 2 pcs per rail, more blocks please request) 3.) set the needed quantity of systems The right price for the complete systems you can see now. 4.) The excat required length of the unit please enter in the bottom field. If you give us no note there, we supply automatically the maximum length of this article. 5.) Please takes your notes for wished dimension "T5" (the first and the last distance to the middle of holes). If you give us no note there, we supply automatically the middle of arithmetically for a minimum of 10mm. for example: 20/20 6.) If you like, give us further notes for technical refernces in the field "notes". Technical data SMLFS-20: Data carriage Data track roller and bolts

Request for quotes

Create one request and get multiple quotes form verified suppliers.

  • Only relevant suppliers
  • Data privacy compliant
  • 100% free
Filters

Results for

Rail supports - Import export

Number of results

39 Products

Countries

Company type

Category