Power switches - Import export

Single-phase primary switched-mode power supply in metal housing. Note: Closed version with screw fittings with contact protection. Overload protection due to current limit, auto recovery. Protected against short-circuit, overload and surges. Power on LED indicator. For DIN top hat rail mounting. Technical data: Rating: IP00 Protection class: I Standard: UL508, TUV EN60950-1, CE Connection: screw terminals with contact protection Fastening: installation on DIN rail TS-35/7.5 or 15

- Simple automation directly using the control system without software and/or PC - Operation with limit switch or via power consumption - Left/right operation and speed control directly on the housing - Option for external switches/joysticks - Various modes of operation, such as tip operation and start to finish (semi-automatic) - Various adjustable acceleration ramps - Power supply via 24V/2.5A

With the classic network switch in Dragonfly case format, Dragonfly amplifiers can be connected bundled to a PC or to a larger network. In combination with a Dragonfly PoE (Power over Ethernet) module, this switch can be used to power Dragonfly amplifiers. •,10x 1GB/s Ethernet ports (8 ports with PoE support) •,Bundle the data streams from multiple Dragonfly amplifiers to forward them to a PC or laptop. •,Front LEDs to indicate connection and power supply via PoE.

With the Dragonfly PoE (Power over Ethernet) module, amplifiers connected via a Dragonfly network switch can be powered via the network cable. •,Maximum output power of 150W to power up to 8 Dragonfly or 3 Hummingbird32 amplifiers. •,Less cabling required, as the power supply is ensured via the network cable.

KEDU Electromagnetic Switch Switch with protection against sudden power cuts. 4 Pole Switch

We bring to your attention a device for remote power control of data center equipment Resilient Power Control Module (RPCM). RPCM combines the functions of remote power management, automatic transfer switch (ATS) without interrupting the operation of connected equipment, short circuit protection and an electricity meter on each output. RPCM has 2 power inputs and 10 pins. The device has no analogues on the market.

This external bypass module is intended for use with UPS FROSTYLE11, 13 kVA. In Normal Mode, the UPS connects to utility power through the bypass module and provides uninterrupted power to the load. In Bypass Mode, the load is switched to power directly from the external network, bypassing the UPS circuits. The UPS input and output are completely isolated from the loads and the mains. In this mode, the UPS can be safely (and without disconnecting the load) removed from the system for maintenance or replacement

Nerpa 441B aero boat is a model with a gasoline engine having a capacity of 98 hp. It is designed for 4 people: a driver and 3 passengers. The total load-carrying capacity on water is 350 kg. The sealed housing is made of high-strength aluminum. The bottom is protected by special grade polyethylene sheets. They are firmly bolted. This makes it easy to repair the cover or change it. The deck is designed in such a way that it does not accumulate water. The boat is driven by an aero unit. It consists of an engine, a propeller and a belt. The operation mode is chosen by the customer. It can be a steering wheel or a lever. The control panel contains a tachometer with a service hour meter, a speedometer with a GPS sensor, an engine start button, a power switch, headlight switches, and a sound warning system. Aero boat is able to move on water, ice, snow, swamps, shallow water and land.

Nerpa 241B aero boat is one of the most compact and lightweight models with a gasoline engine having a capacity of 98 hp. It is designed for 2 people: a driver and a passenger. The total load-carrying capacity on water is 350 kg. The sealed housing is made of high-strength aluminum. The bottom is protected by special grade polyethylene sheets. They are firmly bolted. This makes it easy to repair the cover or change it. The deck is designed in such a way that it does not accumulate water. The boat is driven by an aero unit. It consists of an engine, a propeller and a belt. The operation mode is chosen by the customer. It can be a steering wheel or a lever. The control panel contains a tachometer with a service hour meter, a speedometer with a GPS sensor, an engine start button, a power switch, headlight switches, and a sound warning system. Nerpa 241B aero boat is able to move on water, ice, snow, swamps, shallow water and land.

Nerpa 237B aero boat is one of the most compact and lightweight models with a gasoline engine having a capacity of 35 hp. It is designed for 2 people: a driver and a passenger. The total load-carrying capacity on water is 350 kg. The sealed housing is made of high-strength aluminum. The bottom is protected by special grade polyethylene sheets. They are firmly bolted. This makes it easy to repair the cover or change it. The deck is designed in such a way that it does not accumulate water. The boat is driven by an aero unit. It consists of an engine, a propeller and a belt. The operation mode is chosen by the customer. It can be a steering wheel or a lever. The control panel contains a tachometer with a service hour meter, a speedometer with a GPS sensor, an engine start button, a power switch, headlight switches, and a sound warning system. Nerpa 237B aero boat is able to move on water, ice, snow, swamps, shallow water and land.

ARM Cortex-A8 module with Sitara™ AM335x from Texas Instruments. Key functionalities Real-time communications subsystem Low-cost due to highest level of integration Extended temperature range 2x IEEE1588 Ethernet (L2 Switch) Low power consumption (typ. 2 W) Long-term availability

ARM Cortex-A8 module with Sitara™ AM335x from Texas Instruments. Key functionalities Real-time communications Subsystem Recommended for high quantity use Low-cost due to highest level of integration Extended temperature range 2x IEEE1588 Ethernet (L2 Switch) Low power consumption (typ. 2 W) Long-term availability

ARM9 module with i.MX28 from Freescale Key functionalities Low-cost due to highest levels of integration Compact dimensions Extended temperature range 2x IEEE1588 Ethernet (L2 Switch) Low power consumption (typ. 1 W) Long-term availability Power management IEC 61850 stack

Safety management in 2 zones in a compact 45 mm format Short-circuit detection in 2 µs, self-resetting Removable terminals Performance level with AWAX controller: PL = e Safety category: 4 Safety Integrity Level: SIL 3 Time before dangerous failure: MTTFd = 415 years Cycle before dangerous failure: B10d=100,000 at 5A Risk duration: 20 ms max. Cable severing protection: yes (opening of safety lines) Short-circuit and overload protection: yes, using DLC (opening of safety lines and current limiting in contacts) Reaction 2 µs ultrafast Safety contacts/diagnostics zone 1: 3x NO 8A/250V redundant / 1x NF 8A/250V redundant series Safety contacts/diagnostics zone 2: 3x NO 8A/250V redundant / 1x NF 8A/250V redundant series Indicators: 2 display LEDs per zone for diagnostics and 1 LED for power Reset: configurable by dip-switch (SR=Automatic, N=manual) Mounting: symmetrical DIN 35mm rail on DIN 50022 Mounting: IP 54 electrical box Electrical connection: Maximum 14 AWG (2.08 mm²) / 250V minimum Temperature: -20°C to +60°C Certification: TÜV Rheinland 01/205/5168/11

Flat led backlight system with border illumination for transmitted light- and contour applications for machine vision systems. At nearly all of our back lightings we are working with border illumination. The LEDs are not situated in the lighting area itwelf but below the unlighted edge. The light of the LEDs will be injected into the border of a flat light conductor and uncoupled equally via a calculated dot matrix system. This technique comes originally from the premises of planistar. The dot matric course are sitll being calculated from us an manufactured ba very precise UV print machines. So the square light has an very diffus and even light on the measuring surface. We can produce from very small led lights to very big monster lights every size you need for your vision light system. The high-power led backlights are with switch input for steady or flashing. The controller for the current are always inside.