Results for
CIC - KLAUS CZERWONKA
Germany
Fastening elements, bearings and add-on elements for pneumatic cylinders according to ISO 6432 and ISO 15552.
Request for a quoteCIC - KLAUS CZERWONKA
Germany
The new generation of our pneumatic cylinders according to ISO 15552. Light and robust thanks to innovative design and high-quality materials. An aluminum piston with wear protection, reinforced bronze guides and our MF5 multifunction system with improved damping, centering and sealing ensure maximum reliability even under extreme conditions.
Request for a quoteCIC - KLAUS CZERWONKA
Germany
Sensors and proximity switches for pneumatic cylinders according to ISO 6432 and ISO 15552.
Request for a quoteCIC - KLAUS CZERWONKA
Germany
Pneumatically and electrically operated valves with connection pattern according to NAMUR. High quality aluminum construction. Available in 1/4 and 3/2 and 5/2 sizes.
Request for a quoteCIC - KLAUS CZERWONKA
Germany
Our new generation of particularly robust pneumatic cylinders with tie rods.
Request for a quoteCIC - KLAUS CZERWONKA
Germany
Pneumatic standard cylinder according to DIN / ISO 6432. Available in diameters between 8 and 25 mm. Standard version in single / double-acting, with magnetic piston and adjustable cushioning. A complete range of accessories for mounting and position sensing is available.
Request for a quoteMETALLIC ELEPHANT
United Kingdom
If you are hot foil printing large items or lengthy runs, a pneumatic machine (air machine) may be the ideal solution you need. Pneumatic hot foil stamping machines deliver the same results consistently, no matter how large your hot foil requirements may be.
Request for a quoteNORELEM FRANCE
France
Doubleacting pneumatic cylinder acc. to DIN ISO 6432. Piston rod with external thread, position detection for proximity switch and flexible damping on both sides.
Request for a quoteNORELEM FRANCE
France
Doubleacting pneumatic cylinder acc. to DIN ISO 21287. Piston rod with internal or external thread, position detection for proximity switch and flexible damping on both sides. Thanks to their compact structural dimensions, compact cylinders are ideal for use in installation spaces where space is limited.
Request for a quoteNORELEM FRANCE
France
Doubleacting pneumatic cylinder in constructionoptimised design acc. to DIN ISO 15552. Piston rod with external thread, position detection and adjustable pneumatic damping. Due to their robust construction, these cylinders are the preferred choice for numerous applications.
Request for a quoteCIC - KLAUS CZERWONKA
Germany
The pneumatically operated directional valves VK are robust, reliable and can be installed in a variety of ways. Installation in-line, on the wall, on modules, as a battery or directly on cylinders is possible without any problems. Available sizes between 1/8, 1/4 and 1/2 in 3/2, 5/2 and 5/3.
Request for a quoteNORELEM FRANCE
France
The collet is opened by applying compressed air to the "open" port. The collet is closed (for clamping) by applying compressed air to the "close" port. The pneumatic connections can be screwed on either from below or from the side. If the air is connected from below, the side ports must be closed. Machining the collet for external clamping: The negative form of the workpiece to be clamped is machined into the collet. Free-form and asymmetrical contours are possible. Different workpieces can be clamped quickly and securely by simply exchanging the collet. The collet can be milled down to height H2. This enables multiple workpiece contours to be machined into one collet. Repeat accuracy for workpiece: +/-0.03 Repeat accuracy after replacing the collet +/- 0.02 The collet radial clamping travel is 0.15 mm per clamping segment. To prevent damage the collet should not be tightened without a workpiece or clamping ring in place. The operating air pressure should lay between 0.45 - 0.55 MPa.
Request for a quoteTHOMAS CONSTRUCTIONS MECANIQUES - TCM SAS
France
As part of our maintenance and repair services, our teams can manage the technical upgrading and renewal of your existing pneumatic and hydraulic controls.
Request for a quoteTHOMAS CONSTRUCTIONS MECANIQUES - TCM SAS
France
A major challenge when designing special machinery, the quality of design and integration of hydraulic and pneumatic controls is key for proper operation, reliability and maintenance purposes. Fully aware of these issues, we take the greatest possible care and apply our wealth of experience to design and integrate pneumatic and hydraulic control solutions that are both efficient and reliable. The components used are all selected from the most widely used, tried-and-tested solutions available from leading manufacturers. At your request, we will install the materials recommended by your technical services.
Request for a quoteIGUS® GMBH
Germany
chainflex® CF Air pneumatic hoses were tested in e-chains® for over several million bending cycles. Their outstanding features include flexibility, high abrasion resistance and very good resistance to oil and coolants. -For extremely heavy-duty applications -PU/PE hose -Oil- and coolant-resistant -Abrasion-resistant -Outside-toleranced -PVC and halogen-free
Request for a quoteNORELEM FRANCE
France
Pneumatic clamps have the following advantages compared to hand clamps: The operator is relieved of frequent clamping. Several clamps can be activated at the same time and can be closed in a specific sequence. Single or multiple clamps can be activated from varying positions by machine control or hand control. Because of the toggle system: the clamp remains closed if the air supply fails. the air consumption is low due to the large end ratio. pivoting the clamping arm achieves a large opening travel. optimum force and movement ratios are achieved. VL = air consumption per complete cycle in dm³ at 6 bar. Selection criteria: To select the correct size of pneumatic clamps, the possible clamping force at 6 bar (any compressed media are permissible, maximum pressure 10 bar) is specified besides the retaining force. F3 is the possible clamping force that the clamp exerts on the end of the clamping arm, F4 the force it exerts on the fulcrum side.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
NORELEM FRANCE
France
Swing clamps are used where low clamping forces suffice or where the clamping point must be free when mounting and removing the workpiece. The block form of the housing offers universal fastening possibilities. The magnetic piston is primed for electrical end position feedback. Including screw and lock washer for fastening the clamping arms (accessories). The swing action of the clamp should not be blocked. F1 = at 6 bar (max. operating pressure).
Request for a quoteCIC - KLAUS CZERWONKA
Germany
The CD short-stroke cylinders have been developed to ensure high performance in a very small space. Sensors can be integrated in the cylinder housing. Available versions: single / double acting or with through piston rod.
Request for a quoteCIC - KLAUS CZERWONKA
Germany
Directly controlled brass solenoid valves in a very compact design for air, gases, steam and non-aggressive liquid media. In sizes 1/8" and ¼" as 2/2 and 3/2 Valve available in NC or NO with a choice of nominal widths from 1.5 to 4.5 mm in all common voltages and various sealing materials.
Request for a quoteCIC - KLAUS CZERWONKA
Germany
Rodless linear drives allow stroke lengths of up to 6000 mm with a reduced overall length. Stable guidance and durable sealing system even at high speeds and temperatures.
Request for a quoteCIC - KLAUS CZERWONKA
Germany
Manual slide valves as real shut-off valves, which allow the system to be vented when it is switched off. Available in sizes 1/8 to 1/2″. Other colors such as black or red, as well as special versions with spring return or latching are available on request.
Request for a quoteCIC - KLAUS CZERWONKA
Germany
Solenoid valves made of brass, membrane-controlled for air, gases, steam and non-aggressive liquid media. In the sizes 1/4" to 1", as 2/2 and 3/2 Valve available in NC or NO in all common voltages and various sealing materials.
Request for a quoteCIC - KLAUS CZERWONKA
Germany
Diameter 32-63mm. Standard version in single / double-acting, with magnetic piston and adjustable cushioning. A complete range of accessories for mounting and position sensing is available.
Request for a quoteCIC - KLAUS CZERWONKA
Germany
control panels, control cabinets, pneumatic systems, pneumatic systems, control units, pre-assembled pneumatic modules for machines and plants in automation technology factory automation assembly lines test benches Also for automotive applications such as brake test benches, assembly robots, conveyor belts. Design, layout, assembly, plug and play delivery. We are also happy to use components according to the parts list, specifications or customer specifications.
Request for a quoteCIC - KLAUS CZERWONKA
Germany
Cylinder series with dimensions based on ISO 15552 with an integrated position measuring system based on magnetostriction. The position sensor allows a high degree of accuracy in measuring the cylinder position. Analogue output signal 0-10 V via M 12 connector.
Request for a quoteCIC - KLAUS CZERWONKA
Germany
Double-acting pneumatic cylinder for integrated installation in clamping tools.
Request for a quoteCIC - KLAUS CZERWONKA
Germany
Brass solenoid valves indirectly controlled for air, gases, steam and non-aggressive liquid media. In the sizes 1/4" to 1", as 2/2 and 3/2 Valve available in NC or NO in all common voltages and various sealing materials.
Request for a quoteCIC - KLAUS CZERWONKA
Germany
Miniature ball valves and universal ball valves in brass, with 1/8 to 2″ thread or plug-in connection for hose 4 to 8 mm.
Request for a quoteResults for
Pneumatics - Import exportNumber of results
101 ProductsCountries
Company type
Category