Operating equipment - Import export

Vessels designed for gases, liquefied gases, dissolved under pressure, for vapors and liquids used for fluids of groups 1 and 2 Boilers intended to produce hot water, temperature of which is over 110 °C or vapor, excessive pressure of which is over 0,05 MPa as well as directfired vessels Pipelines designed for gases, vapors and liquids used for fluids of groups 1 and 2 Equipment elements (assembly units) and components hereto that can withstand pressure Valves designed for equipment with fluids of groups 1 and 2 Indicating and safety devices Pressure chambers (except for medical singleseated ones) Protecting devices and appliances Main pipelines, intrafield and local distribution pipelines intended for transportation of gas, oil and other products except for equipment used at the pressure regulation stations or compressor stations

As part of our maintenance and repair services, we also perform technical upgrading and modernisation operations on existing electrical equipment.

Rolling stock, integrated manufacturing and testing equipment, the mobility of our trade specialists are just some of the key assets we deploy to comprehensively manage your requirements, whatever your needs or the time of year. At the same time, we also perform maintenance operations on your equipment at your premises: safety compliance, refurbishment and repair, welding, metal work, electrical and mechanical maintenance, assembly and retrofitting. Our qualified employees are at your disposal and are fully accustomed to working on site with customers, whether independently or with teams working in other trades. Our teams have all the necessary clearances and qualifications to provide you with quality facilities, while working in compliance with safety regulations and your internal procedures.

Numerically-controlled hydraulic press brake, numerically-controlled hydraulic shearing machine, numerically-controlled machining centres, numerically-controlled lathes and milling machines, mortising machines, presses, drilling machines, rolling machines, semi-automatic welding station, TIG/Plasma/Oxycutting workstation, paint booth, assembly workshop (mechanics, hydraulics, pneumatics, electrics, automation), lifting equipment, testing and programming workstations, etc. With our diverse range of facilities and modular covered areas, we can manufacture practically any type of installation or equipment, with unlimited space and technological expertise. Our multidisciplinary team of highly qualified specialists, combining long-standing experience with the technical skills of youth, guarantees the optimal operation of our equipment and the quality of the facilities delivered to you.

We have an after-sales team at your disposal which can diagnose and troubleshoot any electrical, IT or mechanical problem in the shortest possible timeframe. Depending on the case, we can also offer to install remote control systems that operate via telephone or internet connection, such as Teamviewer, VNC or Cisco VPN Client. As a result, we can perform maintenance operations very quickly on equipment without the need for an on-site visit, regardless of the distance

No more developing complex computer software requiring the expertise of experienced IT technicians. No more robots that are extremely sensitive to high ambient temperatures, affecting their reliability and impacting the quality of manufactured products. No more need for large-scale production operations to ensure that this equipment is cost-effective.

When constantly monitored and accurately analysed, this data can be used to anticipate unexpected breakdowns, to schedule preventive maintenance operations, and even to identify the weak points of production facilities and continuously improve their efficiency. No more inconvenient production shutdowns. No more preventive replacement of equipment that can operate effectively until the next maintenance campaign No more excessive and unjustifiable preventive maintenance costs.

This means no more complex computer programmes requiring the knowledge of experienced programmers. No more equipment that is extremely sensitive to high ambient temperatures, thus resulting in the variable quality of manufactured products. No more need for large-scale production operations to ensure that this equipment is cost-effective. The new programming tools available offer a user-friendly approach to robot configuration. Using a simple touch tablet, you can quickly and easily reprogramme your robot, which can be fully and economically operated even for small and medium-sized production runs, without the need to call on a programming expert.

STEEC is able to carry out milling and micro-milling operations on complex mechanical parts with increasingly finer dimensions and increasingly tighter tolerances. STEEC carries out micro-drilling operations to manufacture not only parts but also very high precision electrodes. That enable all spark erosion micro-drilling and countersinking operations to be performed. Equipped with a stock of high-tech machines and leading edge IT tools, such as the Solidworks software, STEEC is capable of meeting special requirements and providing innovative solutions for each of its customers. The experience gained in other high precision machining technologies has enabled STEEC to develop innovative milling processes that are well recognized in the industrial environment.

Discover the Power of Caterpillar Alternators Reliability, Efficiency, and Durability in Every Unit Introducing the Caterpillar Alternator – the ultimate power solution for your machinery. Engineered with precision and built to last, Caterpillar alternators meet the highest standards of performance and reliability. Whether you're operating heavy-duty construction equipment, industrial machinery, or commercial vehicles, our alternators ensure uninterrupted power and optimal performance. Why Choose Caterpillar Alternators? * Superior Performance * Robust Design * Enhanced Efficiency * Easy Installation and Maintenance * Comprehensive Support * Warranty Assurance Contact us today to learn more about how Caterpillar alternators can power your success.

The inverter machine VIKING 500A PRO is used for manual arc welding of metal blanks. The inverter has a functional control panel with a digital display that displays the main operating parameters. The device is equipped with overload protection and voltage surge protection. The technologies applied during the manufacture of VIKING 500A PRO devices allow performing any tasks in welding, surfacing and cutting metal structures for performing work with any kind of electrodes with a diameter of up to 6 mm and a maximum arc welding current of up to 500А (100% at 420 A). The welding inverter machine can be used at low temperatures and reduced supply voltage. Adjustable functions of hot start and arc reheat imply the ability to adjust the operation of the device with minimal spattering and allow you to perform work in any spatial position of the electrode and welded surfaces.

Ideal for trimming and scoring hidden airbag compartments on thermoformed skin. After the fabrication of IP skins through thermoforming, two separate fabrication steps are still needed before foaming. In the first step, the thermoformed skin will be trimmed in the external zone through punching or a blade cutting process. Depending on the requirements, this is where FRIMO's blade cutting equipment comes into operation. In the second step, the skin will be weakened in the airbag area by a blade. By using the new FRIMO FlexTrim Combi Trim Scoring machine, both steps can be realised at once. The skin is positioned in a common component fixture and finished with two different cutting tools. The new system concept, with its flexible design and layout possibilities, offers a variety of options for combinable process and operation groupings. As an example : one 2-station system with two robots, which are equipped with automatically exchangeable cutter heads, and where two different products

Do not hesitate to contact us for your requests for industrial, HVAC and water valves and pipes... www.stracau.com s.creiche@stracau.com +33.6.76.18.78.74 (Whatsapp)

MECAPLUS-HP “AGILE” MACHINING High precision and performance solution HIGH PRODUCTIVITY 3 axes milling equipment : “AGILE” MACHINING • Designed and realized for an intensive use. • Heavy, fast, powerful, precise and efficient equipment, easy to operate for the machining of rigid sheet materials of strong thickness, in the fields of plastic processing, modelling, aeronautics, aluminium processing… or for the machining of molds and 3D models. • Particularly adapted for the machining of aluminium, plastic materials of strong thickness and composite materials with high mechanical properties. • Many customization possibilities. • Innovative and efficient vacuum tables with turbine technology or vacuum pumps. • Numerical controls SIEMENS or HEIDENHAIN type. • Quality kinematics integrating industrial components supplied by the world leaders in their field, mounted on welded stabilized steel frames.

The rated power of FORA PULSE UPS is 6000VA or 10000VA (depending on the selected model). It is designed to provide high quality uninterruptible power supply to computers and other sensitive electronic equipment. The operated UPS can only be placed in a room with an ambient temperature of 040 ° C. Install in a clean environment, away from moisture, flammable liquids, gases and corrosive substances.

We bring to your attention a device for remote power control of data center equipment Resilient Power Control Module (RPCM). RPCM combines the functions of remote power management, automatic transfer switch (ATS) without interrupting the operation of connected equipment, short circuit protection and an electricity meter on each output. RPCM has 2 power inputs and 10 pins. The device has no analogues on the market.

1500 - 19000 CFM / 2,500 to 33,000 m³/hr Nash's 2BE3 & 2BE4 vacuum pump series offers capacities ranging from 1,500 to 19,000 CFM (2,500 to 33,000 m³/hr). Designed to operate in demanding environments like the paper, power, mining and chemical process industries, these pumps offer durability and reliability at a low cost of operation. Each model is equipped with an application-proven polyisoprene-lined body for added corrosion & erosion resistance. The unique inlet configuration allows for both top and side inlet arrangements to accommodate low headroom installations. In installations where space is limited, the top discharge capability of the 2BE4 allows the use of a top mounted discharge separator that saves floor space and eliminates the need for a trench. The pumps allow efficient operation over the entire vacuum range without the need to change the pump's internals. When equipped with a center shroud, split vacuum operation up to 12 in. Hg (400 millibar) differential can be achieved. Large inspection ports allow easy access to pump internals for inspection and maintenance. For more aggressive applications, stainless steel, stainless steel clad and epoxy coated components are available.

1500 - 19000 CFM / 3,000 to 9,500 m³/h Nash's 2BE3 and 2BE4 series compressors have capacities ranging from 1,500 to 19,000 CFM (2,500 to 33,000 m³hr). Designed to operate in demanding environments like the paper, power, mining and chemical process industries, these compressors offer durability and reliability at a low cost of operation. Each model is equipped with an application-proven polyisoprene-lined body for added corrosion & erosion resistance. The unique inlet configuration allows for both top and side inlet arrangements to accommodate low headroom installations. In installations where space is limited, the top discharge capability of the 2BE3 and 2BE4 allows the use of a top mounted discharge separator that saves floor space and eliminates the need for a trench. These compressors allow efficient operation over the entire vacuum range without the need to change the compressors's internals. When equipped with a center shroud, split vacuum operation up to 12 in. Hg (400 millibar) differential can be achieved. Large inspection ports allow easy access to pump internals for inspection and maintenance. For more aggressive applications, stainless steel, stainless steel clad and epoxy coated components are available.

"Get your robotic systems up and running smoothly with KIPROM Robotics Commissioning Services. Our team of experts will ensure that your robotic systems are properly installed and configured to meet your specific needs. Our commissioning services include: ● Equipment installation ● Software programming and configuration ● Safety and functional testing ● Operator training ● Integration with existing equipment and processes Don't let commissioning delays hold your business back, choose KIPROM Robotics Commissioning Services for a smooth and efficient start-up. Contact us today to schedule your commissioning services and experience the benefits of industrial automation in your business”.

Heat exchangers, tanks, containers, boilers, metal structures, pipelines, etc. are complex, so the most effective way to clean them is by using equipment with exceptional power. Our company has high-pressure cleaning equipment with working pressure of 1000 bar (193 l/min). These and similar technical parameters also apply to other industrial cleaning equipment operated by our company

The Lifting Operations & Lifting Equipment Regulations (LOLER) 1998 state that every lifting operation involving lifting equipment (cranes) must be "appropriately supervised". A trained & competent Crane Supervisor would be nominated by the Appointed Person. It is a legal requirement under The Lifting Operations and Lifting Equipment Regulations (LOLER) 1998 that every lifting operation is appropriately supervised The Crane Supervisor course is designed to tap-in to your existing knowledge of lifting operations and enhance it, to enable you to direct and supervise a safe lifting operation in accordance with the safe system of work. The course will also help you identify problems that may have the potential to lead to unsafe situations during a lifting operation

It is a legal requirement under The Lifting Operations and Lifting Equipment Regulations (LOLER) 1998 that every lifting operation is carried out in a safe manner. This includes use of a responsible person to guide the crane using suitable means of communication, and to securely attach the load to the crane. We have now developed a 'Foundation Plus' course which is five days in duration. This will give candidates more practical training time to give greater preparation for the CPCS Practical Test, and to enhance post-course knowledge and skills. With effect from January 19th 2015 this category has been amended to add endorsements against a range of lifting equipment types to cover the increased use of slingers for a wider variety of lifting operations. The endorsements are: A – All Types – all duties B – All Types – static duties C – Knuckle boom static only D – Excavator only E – Lift truck only

Gas equipment designed for cooking, heating and hot water supply, including equipment as a part of combined devices Modular automatic burners (gasfired and combined) and gasequipment with modular automatic burners for cooking, heating and hot water supply Devices designed to be built in gasusing equipment and operated separately from equipment mentioned above including control, adjustment and safety appliances Steam boilers with steam pressure over 0,07MPa and hot water boilers with water temperature over 115 °С Equipment designed to be used in manufacturing processes at industrial facilities, except for the technical devices included in the list of gasusing equipment in which respect the requirements of TR CU 016/2011 are specified Equipment using gas as motor fuel Requirements of TR CU 016/2011 are set with regard to gasusing equipment listed in Annex № 1 to the Regulations.

The Fountain Set allows fountain quick installation in a city or private area. Bowl isn't included in the set. Fountain components are made of stainless steel for heavy duty and long service life. This ready-made solution is much cheaper than a custom greenfield project. You save money on engineering costs –sets are already designed based on tests and years of experience. The Set includes everything you need for assembly, except for the bowl and embedded elements. The package consists of: fountain nozzle, pump, filter case assembly, underwater cables set, fountain set control cabinet, LED RGB Illumination system, installation and operating manuals. Custom equipment set is possible based on the technical parameters and dimensions provided by the Customer.

This is a ready-made set of equipment for fountain assembly. The Fountain Set allows fountain quick installation in a city or private area. Splash fountains are the easiest type of fountains to operate with all the equipment installed in an underground bowl. Made of stainless steel for heavy duty and long service life. This ready-made solution is much cheaper than a custom greenfield project. You save money on engineering costs –sets are already designed based on tests and years of experience. The Set includes everything you need for assembly, except for the bowl and embedded elements. The package consists of: fountain nozzles, collector(s), pump(s), filter case assembly, underwater cables set, fountain set control cabinet, LED RGB Illumination system, decorative foot grating, grating supports, installation and operating manuals. Custom equipment set is possible based on the technical parameters and dimensions provided by the Customer.

This innovative solution enables an immersive remote connection experience with operating rooms to improve the quality of care for technicians and surgeons. Main Features: VIDEOCONFERENCE Allows communication with technicians or colleagues who are required during the intervention. REMOTE CONTROL Allows remote control of medical equipment in the operating room to make support more efficient. It can be several equipments simultaneously and multi-brand. VIDEO CAPTURE Connect as many capturers as you wish and share the image of the operating room screens with other colleagues. Our software will allow you to generate pre-formatted layouts with the images. CAMERA CONTROL A PTZ camera is included in the operating room, which can be remotely controlled through the application, in order to explore the environment in detail, rotating the camera and zooming in where needed.