Network cabling - Import export

Designed specifically for servicemen of telecommunications companies. The product consists of four compartments: In the first large compartment there are compartments in which the following items can be placed: laptop, charger, folder, with documents, cables. In the second middle compartment there is a pouch with tools. In the pouch, you can place: connector crimping tool, flat, cross-head screwdrivers, stationery knife, wire cutters, a hammer, pliers, electrical tape/zip ties, RG45 connectors, Scotchloks. In the third middle compartment there is a pouch with compartments for items: measuring device, organizer with consumables, test tube, Tone Generator, Multimeter. The fourth small compartment can include: splitters, RJ45/RJ11 sockets, stock of Scotchlocks, stock of clamps, The backpack is designed specifically for servicemen of telecommunications companies.

It is applied for laying trunk and subscribers cable lines indoor. Its specific feature is round design and aesthetic appearance. Cable lines are laid via the duct slot. The cable tray has technological parts for fixing it to the wall.

Metal triangular duct is applied to protect cable lines both indoors and outdoors. Installation: it is fixed to the wall using dowel nails or powder-actuated fastening tool.

Is used for backbone FOCL supports as a supplemental fastening. This mount is sliding, which can significantly accelerate the installation of a cable line. This mount is multi-purpose and does not depend on cable diameter.

Is used for backbone and subscriber FOCL supports as a bracket for an optical distribution box type SNR-FTTH-FDB-24A. This bracket allows storing a cable slack in a coil Ø350 mm in the space between the bracket and the support body.

Is used for backbone and subscriber FOCL supports as a loop fastening for vertical and horizontal cable installation along the support. Replacement of UK-P-(Sh)

Is used for backbone and subscriber FOCLs as an addition to UK-N/U Multi Mounting Unit 150mm extension (for reinforced-concrete supports) when a FOC needs to be mounted on a support. Provides 150 mm FOC projection from the support.

It is applied as an anchor fastening for trunk and subscriber lines, providing offset up to 150 mm between the fixing point of the optical fibre transmission line and the support body. This fastening unit can be fitted with the "installation bracket for the optical distribution cabinet with 150 mm offset (on SV support)" for further placement of the distribution optical cabinet.

It is applied as anchor fastening for trunk and subscriber optical fibre transmission lines

SC/APC type PON connector

Cable TV 1xRF output, SC/APC type PON connector, Broadcast storm control, ACL access control

Used for PON station equipment with capacity up to 32 ports, its power supply equipment and backup equipment united in one node. It is possible to install up to 9U active and passive equipment in the top part of the cabinet.

The design includes a box for connecting FTP and standard camera wires as well as a bracket for attaching input cable. The camcorder is attached directly to the box with self-tapping screws.

The cabinet can accommodate: – a removable panel for optical terminal boxes or an optical cassette type PLC splitter (130x100x25 mm). – box-type optical coupler (90*20*10) – 2 pcs. – 4 optical adapters SC type. No FOCL welding is required. Up to 8 pcs. of cable slack max 30 cm.

Sharpey is fastened with dowels and screws directly to the wall in the communal stairwell. According to Ufanet standard, no more than 10 SM-1 cables are installed inside the cabinet.

It is applied for laying trunk and subscribers cable lines indoor. Its specific feature is round design and aesthetic appearance. Cable lines are laid via the duct slot. The cable tray has technological parts for fixing it to the wall.

It is applied in private houses during installation of PON networks. The cabinet has 4 slots for placement – removable panel for optical crosses or optical divider cassette type (130x100x25 mm). In addition, the cabinet can accommodate up to 3 ku-1 cassettes for optical fiber welded joints.

Fastening unit is applied as an anchoring and supporting fastener in private houses during installation of the trunk and subscriber optical fibre transmission lines. Installation: The part is fastened to the support with the mounting band (2 pcs.)

The patch cord is designed for indoor installation during connection of the subscribers. Description: Optical patch cord made of DROP cable for indoor application. White cable jacket is resistant to temperature drops. Network construction using patch-cords: - Quick and easy installation - Minimum welding - High connection speed - Easy operation -Aesthetics 1SM SC/APC-SC/APC 5m/10m/15m

The patch cord is designed to be suspended at the overhead line supports during installation of the trunk line, and to connect subscribers. Description: Optical patch cord made of DROP cable for outdoor application. Black cable jacket is resistant to temperature drops. Network construction using patch-cords: - Quick and easy installation - Minimum welding - High connection speed - Easy operation

Optical patch cord made of DROP cable for outdoor application. Black cable jacket is resistant to temperature drops. Cable lengths are made according to customer's request. Network construction using patch-cords: - Quick and easy installation - Minimum welding - High connection speed - Easy operation - Aesthetics

Semicircular metal duct is used to protect cable lines running both inside and outside buildings. Mounting to the wall is carried out using dowel nails or a mounting gun. Installation: It is fixed to the wall using dowel nails or powder-actuated fastening tool.

Cable tray Unicor applied for laying trunk and subscribers cable lines. Its specific feature is absence of the cover, cable lines are laid via the duct slot. The cable tray has technological parts for fixing it to the wall. The cable tray has the Fire Safety Certificate.

Empower your business with seamless networking solutions that drive collaboration and efficiency. Connectivity is the lifeline that links an organization’s network, enabling seamless communication between LANs, public cloud-hosted services, on-premises/private cloud DC services, edge devices, and the internet. Our comprehensive network and connectivity solutions offer end-to-end support and management, allowing you to focus on your core business. Get A Free Quote Network internet connection Stay Connected Anytime, Anywhere Your networking and connectivity are essential elements that enable seamless collaboration with your partners, suppliers, and customers. How We Can Help We go beyond providing solutions. Our expertise and tailored solutions help you achieve outcomes that drive innovation, collaboration, and growth. Our expert team can assess your specific needs and recommend the ideal mix of connectivity technologies to establish a solid foundation for your business:

Link is a leading provider of VSAT communication services to the maritime industry, supplying planning, design, engineering, and services relating to cruise ships, work boats, fishing vessels, ferries, fast ferries (Catamaran), offshore projects of all types, dining yachts and gaming vessels globally. Link provides industry standard Maritime VSAT systems from Cobham Seatel, Intellian, and Orbit to enable vessels to establish a full range of IP, voice, and video connectivity.

-For medium duty use -Minor oil influence -More suitable for indoor applications, but also for outdoor use at temperatures > 5 °C -Unsupported travel distances and up to 20 m for gliding applications -Bus connection cable for machining units/machine tools, handling, indoor cranes

readycable® harnessed cables are ready-to-connect cables for use in energy chains®. As manufacturer and harnesser, igus® provides everything from a single source, thus reducing throughput times and the number of suppliers. The portfolio includes an extensive range of catalogue products, including cables harnessed according to manufacturers' standards and diverse industrial standards as well as individual singly or series produced components. Numerous types of cable of different qualities, with different approvals and with different certifications of conformity are available to choose from. All components are subjected to extensive quality checks and functional tests.

With the Dragonfly PoE (Power over Ethernet) module, amplifiers connected via a Dragonfly network switch can be powered via the network cable. •,Maximum output power of 150W to power up to 8 Dragonfly or 3 Hummingbird32 amplifiers. •,Less cabling required, as the power supply is ensured via the network cable.

We are authorized installers for several of the premium brands of cable. We also carry the latest in Fluke Networks TDR and OTDR equipment in order to certify our installations to spec. The structured cabling installation provided by Lynch Networks will be to a very high standard.