Metric threading - Import export

During re-machining, a cutting tool is used to remove material from a workpiece in order to shape or surface it as required. We offer re-machining (turning, twisting) as wage work. The following machining operations we offer: Turn thin stem, pins and tips Screw punctures, approaches and undercuts Heads of screws / cold shaped parts machining process (turning) further machining operations are possible on request. Our curve-controlled automatic Audrema lathes offer you further possibilities of finishing cold-moulded parts. These automatic lathes are designed to achieve maximum precision and reproducibility at high throughputs. Short loading and unloading times permit economical production of medium-sized and large series.

igubal® rod end bearing, female thread With female thread in metric and inch dimensions igubal® rod end bearing, female thread igubal® rod end bearing, male thread With male thread in metric and inch dimensions igubal® rod end bearing, male thread igubal® rod end bearing CL For simplified mounting, with inner and outer threads in metric dimensions igubal® rod end bearing CL igubal® rod End Bearing CL DT For simplified installation, detectable with female thread in metric dimensions igubal® rod End Bearing CL DT igubal® fitting screw, mm Fitting screw with circlip igubal® fitting screw, mm When to use it? When you want to save weight When rotating, oscillating and linear movements should be implemented When high-frequency oscillations/vibrations predominate When a low-noise operation is desired When an electrically insulating part is required When freedom from corrosion is desired For combinations with pneumatic cylinders and gas struts When chemical resistance is required When high stiffening is required When not to use? When you have temperatures above +80°C (then HT options) When rotation speeds in excess of 0.5 m/s should be implemented When very high tensile and lateral loads prevail When applications should be implemented with hydraulic cylinder When dimensions over 30 mm are needed igubal® rod end bearing, female thread With female thread in metric and inch dimensions igubal® rod end bearing, female thread igubal® rod end bearing, male thread With male thread in metric and inch dimensions igubal® rod end bearing, male thread igubal® rod end bearing CL For simplified mounting, with inner and outer threads in metric dimensions igubal® rod end bearing CL igubal® rod End Bearing CL DT For simplified installation, detectable with female thread in metric dimensions igubal® rod End Bearing CL DT igubal® fitting screw, mm Fitting screw with circlip igubal® fitting screw, mm Special properties of the igubal® rod end bearings Maintenance-free, self lubricating High stiffening Very high fatigue strength in varying loads Compensation for alignment errors Compensation of edge loads Insensitive to dirt, dust and lint balls Resistant to corrosion and chemicals High dampening qualities Suitable for rotary, oscillating and linear movements Very low weight Dimensional series K and E, dimensions according to DIN ISO 12240 Version with metal sleeve in the spherical ball for enhanced torque Tolerances igubal rod end bearings can be used, according to the application, with different tolerances. They are designed with a large clearance in the standard product, which enables a secure operation even under high peripheral speeds. The bore of the inner ring has a tolerance according to E10. The shafts should have a tolerance between h6 and h9. Please contact us in case you require lower or more bearing tolerances. Loads igubal® rod end bearings take high forces in normal ambient temperatures, have excellent dampening properties and weigh only a fifth of the conventional metallic bearing housing. In particular cases the load carrying capacity of the rod end bearings should be checked in a practical trial especially with high constant loads and at higher temperatures. Coefficients of surface friction and speeds Rotary motions of the mounted shaft take place directly in the bearing ball made of iglidur® W300. The advantage of this plastic/steel plain bearing is that high speeds can be achieved in dry operation. Taking the radial loads into account, maximum surface speeds up to 0.5 m/s rotating can be attained. The maintenance-free igubal® rod end bearings casually permit linear and oscillating movements of the shaft. Delivery program igubal® rod end bearings are available in the dimensional series K and E for shaft diameters of 2 to 30 mm in all dimensions according to DIN ISO 12240, and of course respectively in the Form A - with male thread and Form B - with female thread The dimensional series K and partly E are moreover available in inch dimensions and – as special version – with a stainless steel sleeve in the spherical ball. Thereby an essentially higher tightening torque is possible than with the plastic spherical ball. Please ask us for other sizes. igubal® rod end bearings - Applications igubal® rod end bearings - Applications Temperatures Dimensional series K in A+B variants for temperatures upt to +200°C (HAT material).

Stainless steel 1.4305 Lamellar insert polyamide (PA6). Seal ring CR / NBR. O-ring NBR. Version: Bright. Note: DIN EN 60423 cable glands with metric thread. Sealing and tension relief are provided by inset fins and a sealing washer. Rating IP68 (5 bar for 30 min). Cable glands are used for connecting fixed calbes and lines in housings, distributors and switch boxes. Temperature range: Static: -40 °C to +100 °C. Dynamic: -20 °C to +100 °C.

Cable fasteners: Stainless steel 1.4404 or PVDF. Hose: Plastic. Version: Cable gland: bright stainless steel, transparent plastic. Hose: coated Note: Washers supplied. EN 60423 metric thread. IP rating 66, 68 up to 15 bar, 69K. Tension relief corresponds to EU standard 62444. EHEDG certified. Seal insert ADI - free Temperature range: Stainless steel cable glands: -40 °C to +85 °C. Plastic cable glands: -20 °C to +85 °C. Hose: -20 °C to +95 °C.

Hexagon socket bolt, DIN-EN-ISO 4762 (old DIN 912 standard) Galvanized, strength class 8.8 Material: C1035 steel Coating: electroplating Thread: metric, normal, accuracy class - medium (6g) A bolt with a cylindrical head and a turnkey internal hexagon, complete and incomplete metric: thread.

Hexagon nut with locking ring DIN-EN-ISO 10511 (old standard DIN 985) Strength class 8 Material: C1035 steel Coating: galvanized Sleeve: Nylon Thread: metric, normal, accuracy class - medium (6H) The main purpose is the fastening and connection of assemblies and parts together with bolts, screws and other fasteners in mechanical engineering and construction. The plastic ring prevents the nut from unscrewing spontaneously, and also ensures the tightness of the thread.

Hexagon nut, galvanized, DIN-EN-ISO 4032 (old DIN 934 standard) Strength class 8 Material: C1035 steel Coating: galvanized Thread: metric, normal, accuracy class - medium (6H) The main purpose is the fastening and connection of assemblies and parts together with bolts, screws and other fasteners in mechanical engineering and construction.

The main purpose is to fix the parts in a plastic dowel of the appropriate diameter or: in wood, with pre-drilling, using metric fasteners (for example, fixing pipe clamps). The carving is rare, single-pass for wood on one side and metric on the other. It has a hexagon between the metric and the screw thread for tightening the screw stud.

Thread: metric, Norman, accuracy class medium (6g) The wing screw is recommended for fastening and connecting assemblies and parts in mechanical engineering, construction: where fast and frequent disassembly of the mounting joint is required. The screw is equipped with "flaps" for tightening the unscrewing manually, which allows you to work without special tools.