Results for
THOMAS CONSTRUCTIONS MECANIQUES - TCM SAS
France
Do you want to validate a concept, or industrialise the production for a new process, new material or new technology? Do you want to minimise the industrial and financial risk involved? Are you concerned about your project’s feasibility? Does the implementation of this project require the involvement of several external contractors at each phase of the process whose specific processes require common pre-validation
Request for a quoteCOSMIC - ENGINEERING GMBH
Austria
The Laminates will be delivered as “Prepreg”
Request for a quoteOPEN GRID EUROPE GMBH
Germany
The safe and efficient construction and operation of gas transmission systems calls for complex decisions; there are a number of prerequisites that must be met. This applies to many areas such as material selection, component design and sizing, well-founded assessments of the condition of pipelines and facilities based on various test procedures, the determination of the repair and maintenance work required as well as quality assurance for materials, procedures and personnel. We offer a comprehensive service portfolio in this area, based on the experience and know-how gained from the operation of our pipeline network and the technical infrastructure available for this purpose.
Request for a quoteDTB EU
Poland
Characteristics: 190 g/m² 100% Melange Recycled Cotton 4 CM Loop to hold / hang the pouch Internal overlock seams Dimensions: 26 x 17 cm Maximum print area: 15 x 8 cm Suitable for embroidery, Screen, and transfer printing
Request for a quoteIGUS® GMBH
Germany
iglidur® X6: nano material The lifetime is up to six times longer than iglidur® J Thanks to nano-technology, iglidur® X6 has a service life of up to six times longer than the heavy duty iglidur® X bearing - even beyond 100°C. iglidur® X6 is available as cylindrical bearings and plain bearings with flange. Lubricants and maintenance-free Long term service temperature up to +250°C Up to 50% better press fit as iglidur® X High compressive strength Very good chemical resistance PTFE free
Request for a quoteIGUS® GMBH
Germany
iglidur® Z: The high-temperature material Extremely high compressive strength coupled with high elasticity enables iglidur® Z bearings to attain their prominent features in association with soft shafts, edge loads and impacts. The bearings are at the same time suitable for temperatures up to +250℃. iglidur® Z is available as cylindrical bearings and plain bearings with flange. Excellent wear resistance especially with high loads High thermic stability For extreme loads Also for high surface speeds Insensitive to edge loads
Request for a quoteANTHERMO GMBH
Germany
Buttweld fittings according to ANSI B 16.9 Extensive stock range in special materials We can deliver Buttweld Fittings in numerous dimensions and materials directly from stock at short notice. Pipe bends with different radii (seamless and welded), T-pieces, reducers and caps essentially make up the product groups Buttweld Fittings (buttweld fittings). We only deliver goods of European origin. Special materials In particular, we supply special materials, which are generally only rarely requested, at short notice from our extensive range in stock. The following special materials are available at short notice: Low Temp Steel A 420 WPL6 / WPHY52 Chrome-Moly A234 Alloy WP5 Chrome-Moly A234 Alloy WP11 Chrome-Moly A234 Alloy WP22
Request for a quoteBVS ELECTRONICS GMBH
Germany
Fanuc consumable materials The following options are available for consumable materials, such as batteries or labels, manufactured by Fanuc Purchase a reconditioned replacement part or new part Replace a reconditioned replacement part or new part Purchase product overhaul repair or cleaning & inspection services We will be happy to supply an onsite service incl. support over the phone, upon request. Our extensive replacement parts warehouse with more than 100,000 instantly accessible modules provides our customers with a fast supply of replacement parts ensuring the costs of machine downtimes are kept to a minimum. All of the repaired assemblies, exchange services and replacement part deliveries of Fanuc consumable materials come with an 18month warranty.
Request for a quoteNORELEM FRANCE
France
Injection moulded, straight teeth. Engagement angle 20°. Machined bore. Polyacetal, white. Polyketone, ivorytone. Note Polyacetal Standard material with high hardness grade and low coefficient of friction. Polyketone Material with significantly longer service life, higher power transmission and greater security against tooth breakage due to the extraordinarily high wear resistance and very good tribological properties. Can be used under water and other media. Injection moulded gear wheels may have internal manufacturerelated cavities. These may become visible during drilling or broaching. They do not impair the function. The torques specified in the tables relate exclusively to the toothing.
Request for a quoteNORELEM FRANCE
France
Carriage body zinc. Plastic bearing material iglidur® J. Rails anodised aluminium. Version Body chromed. Guide rail natural colour anodised. Note Miniature slide guides are maintenancefree and corrosion resistant. Very high speeds and accelerations are possible due to the low weight. Applicable temperature max. 80 °C. Miniature slide guides are insensitive to dust and are ideal for dry running. ** length L2 = 30 mm and * L = 1000 mm included L2 and L only available in full mm.
Request for a quoteOTTO EICHHOFF GMBH & CO. KG
Germany
Metric: Screws from M2 x 10 – M30 x 1000 with thread (up to 100 mm long). Compliant with DIN, EN, ISO, or according to drawings and samples. Plates: From ST 2.9 x 19 – ST 6.3 x 160 / 80 mm with thread (up to 80 mm long). Compliant with DIN, EN, ISO, or according to drawings and samples. KTG screws for plastics: 30-degree thread (OEB Kunst). KTG 3 x 10 mm – KTG 8 x 160 mm with thread (up to 60 mm long). DIN 7500 thread grooving screws: For die casting, zinc or aluminium. M3 x 20 – M10 x 160 mm with thread (up to 50-60 mm long) (OEB Furch). DIN 7513 – DIN 7516 thread cutting screws: For die casting, zinc or aluminium. M3 x 20 – M10 x 160 mm with thread (up to 50-60 mm long) (OEB Schneid). Other thread types: With-Worth, HiLo, UNC/UNF, double-start, triple-start.
Request for a quoteNORELEM FRANCE
France
The nominal diameter of the pin is the same as the receiving hole diameter. The recommended hole tolerance is ISO H12. Due to the chamfered end, the pins can be inserted easily into the hole with a hammer or using automatic placement. After insertion, the plus tolerance of the pins results in a vibration-proof seating. The pins can be easily removed using a mandrel and reused several times. The pins can transmit high shear forces and are resistant to shocks and impacts due to their spring properties. The values specified for the shear force only apply to spring steel.
Request for a quoteNORELEM FRANCE
France
Grid hole pitch 25 ±0.01 mm or 50 ±0.01 mm. Grid hole plugs and ring bolts for lifting are supplied. These subplates conform to subplates for machine tools according to DIN 55201 and JIS 6337-1980. The subplates are also available without grid holes. See plates without a value for “A” (xxx/-). Other dimensions on request.
Request for a quoteD&R RACKING LIMITED
United Kingdom
D & R Racking Ltd have a wealth of experience in bespoke racking requirements. If your requirements be Coil Racks, Tool Racks, Raw Material Racks or just any racks that are none standard and require a more bespoke design and installation then we can help.
Request for a quoteCNC CREATIONS
United Kingdom
- Fully Primed MDF Board. - High quality Moisture Resistant MDF. - Edges sanded after cutting. - Primed all around (inc edges). - Water based primer. - One coat to each face. - Two coats to each edge. - Prompt, precise cutting. - Requires light sanding prior to top coat. - Delivery around 3-7 working days.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
MECASEM
France
Shot blasting is used for the production of metal parts subject to repetitive and cyclical stresses (landing gear, suspension parts, welding, engines, etc.). Faced with major safety constraints and problems of lightening the parts used, the interest of this technique is to be able to increase performance, slow down corrosion and increase the durability of the parts without increasing their weight. Our specialists can assist you in the development of your materials and products and in the control of industrial risks. At Mecasem, we have the latest shot blasting technologies at our disposal in order to best meet our customers' requirements. Our suspended load shot-blasting machine allows us to obtain a more varied range of impacts and opens up new perspectives for use.
Request for a quoteTAOBÉ CONSULTING
Belgium
A thorough toxicological evaluation on raw materials is key if your company has ambition to sell raw materials to European manufacturers, as the raw materials must meet certain requirements to guarantee their safe use in cosmetic products. By making this evaluation available, you increase the sales possibilities all over Europe. This is also a key step to be able to approach the big players (L’Oréal, Estée Lauder, etc.) who will consider you as a serious partners as you will show a non-negotiable approach to quality and ensure the highest level of effectiveness and safety to end-customers. Taobé’s safety assessors will be able to develop a Dossier including: -A full toxicological assessment report of the raw material, according to the SCCS Notes of Guidance, demonstrating the safety of the cosmetic ingredient/s according to the utmost authority in Europe. -A CLP SDS, to provide to importers for REACH notification.
Request for a quoteWBCP-BUILD WORLD BUSINESS CONECTION POWER BUILD
Portugal
Engineering and Construction
Request for a quoteRHIMEX.COM
Netherlands
Tprofiles are specially made to seal gaps or crevices, of doors, hatches, windows or with sheet material. High elasticity protects against tearing EPDM and TPE UV and ozone resistant Widely used in ship and bodywork construction
Request for a quoteRHIMEX.COM
Netherlands
Corner profiles are elastic and provide good sealing at different angles, and are widely applicable in construction and industry. Available in both EPDM, TPE and other materials. Due to elasticity, sealing is possible at different angles EPDM and TPE UV and ozone resistant, can be used both indoors and outdoors Long lifespan
Request for a quoteTRU
Belgium
Did our Free scan determine that certain methods, techniques, or materials you use do not meet the industry standards? Do you want to know exactly which steps to take to comply with these rules? We would be happy to carry out a detailed audit.
Request for a quoteMORE BY US LTD.
Bulgaria
We cover a wide range of printed materials that support your marketing and event needs. By creating visually appealing and effective print assets, we help enhance your brand’s presence and communication, ensuring that your printed materials make a strong impact. What you get: Brochures & Catalogues Invitations Programmes and Agendas Brochures and Flyers Custom Design Solutions
Request for a quotePETRO BIRCH
Kazakhstan
High quality construction material. Plywood has high strength and an attractive surface appearance. Thickness, mm - 3 - 30 Our manufacturing capabilities encompass plywood thicknesses ranging from 3 millimeters to 30 millimeters, offering our customers a comprehensive selection to meet their specific needs Grade B/BВ, BB/CP, BB/C, CP/CP, CP/C, C/C Material - 100% birch This material contributes to the exceptional quality, durability, and versatility of our plywood Glue category - exterior By incorporating Glue category - exterior adhesives into our manufacturing process, we prioritize delivering high-quality plywood that meets the demands of outdoor environments, providing our customers with a reliable and resilient material for their projects. Format, mm 4x8 1220 / 1250 х 2440 / 2500 8x4 2500 / 2440 x 1250 / 1220 Formaldehyde emission class - E1
Request for a quoteSAKIC D.O.O.
Bosnia and Herzegovina
For all barbecue enthusiasts, our specially prepared grill charcoal ensures perfect cooking of every piece of meat. Versatile and highly efficient, our grill charcoal allows for quick ignition and attaining high and long-lasting temperatures for carefree grilling. Whether you're a professional chef or an amateur, our grill charcoal will elevate your passion for grilling to a whole new level. With various packaging options of 2.5 kg, 3 kg, 4 kg, and 5 kg, tailored to your needs, and a granularity ranging from 20 to 80 mm, our grill charcoal becomes the ideal companion for all your barbecue adventures.
Request for a quoteMATERIALS TRANS LOGISTIC
Armenia
We present Certified moisture-resistant FSF plywood, which is made from natural wood veneer. Phenol-formaldehyde resin glue is used for gluing, which allows achieving high environmental parameters. The material is safe for health when used in any temperature conditions: even in the case of strong heating, it does not emit toxic substances.Advantages: Versatility of use High strength and wear resistance Easy to process High level moisture resistance
Request for a quoteMATERIALS TRANS LOGISTIC
Armenia
We present an environmentally friendly, easy to process, durable and aesthetic material. FC plywood is indispensable for the construction of floors, the production of furniture, decorative interior elements, and wooden packaging. It is valued for a whole range of advantages that are not typical for any other types of plywood products.
Request for a quoteResults for
Material fur - Import exportNumber of results
45 ProductsCountries
Company type