Magnets - Import export

Magnet with notepad in a fun Christmas design of Santa Claus and Reindeer. Includes 40 plain sheets and natural wood pencil. 40 Sheets Notepad. Pencil Included

Ball, aluminium. Magnet, neodymium. Body, steel. Holding ring, steel lined with leather. Version Anodised. Holding ring chemically nickelplated. Note The magnetic clamping balls are used to gently hold components in the optimum working position during e.g. polishing, assembling and laser welding. Swivel angles of up to 90° can be set, depending on the workpiece geometry and weight. The magnetic ball can be turned on and off using the Tgrip hex key provided.

Housing plastic. Magnetic core hard ferrite. Note These magnets are often used on notice boards, whiteboards and magnetic boards. Drawing reference 1) Magnetic face 2) Magnet 3) Housing

Housing, steel. Magnetic core NdFeB (neodym). Protective rubber jacket, synthetic rubber. Housing, electro zincplated. Black protective rubber jacket. Shallow pot magnets with tapped pin, shielded system. With rubber protective jacket for protecting sensitive surfaces. The coefficient of friction is increased by the rubber jacket so that high lateral friction is achieved. magnetic face 2) magnet 3) rubber

Housing, steel. Magnetic core AlNiCo. Hard magnet in aluminium housing and steel jacket. Shielded system. Pot magnets are used for retaining, lifting and mounting in fixtures. Due to the painted surface, the diameter D can be up to +0.8 mm.

Housing brass. Magnetic core NdFeB (neodymium). Smooth design, shielded system. Under no circumstances may Neodym magnets be pressed directly into iron, loss of attractive force due to magnetic short circuits occurs. Diameter “D” ground to an h6 tolerance. These magnets can be shortened by the dimensions “H1” and “H2”. The magnets can be mounted by pressfit, screwingin or gluing.

Housing, steel. Magnetic core hard ferrite. Shallow pot magnets, shielded system. Hairline cracks in the magnetic material are unavoidable for technical reasons in D=80, D=100 and D=125 versions. They do not impair the attracting function of the magnets in any way.

The workholding magnets 090602010 to 090602030 consist of a permanent magnetic system with fine pole divisions (4 mm) which are effective on two or three faces. To clamp extremely thin steel parts we recommend the magnet 090602040 with the finest pole division of 1.3 mm. The magnetic lifespan of the workholding magnets under conditions prevailant in industrial machining is unlimited. Approximately half the height of the workholding magnets can be ground down or polished away with no significant impairment of the magnetic strength.

Dutch Scrap Recycling B.V. Is the leading trader in Iron, Aluminium, copper, plastic, rubber , Paper, copper cathode and wire scraps in the Netherlands and Continues to Be a Family Business With Four Generations Working to Innovate the Recycling Industry.

Unshielded system. The magnets can be mounted by pressfit or gluing. 1) magnetic face

Black. Pan head screw and retaining plate electro zinc-plated. Note: Magnetic catch for swing and sliding doors. The elongated holes enable flexible positioning on aluminium profiles and panel elements. Drawing reference: 1) Pan head screw 2) Retaining plate

The CQ series cylinders are manufactured according to ISO 15552 and have diameters between 160 and 250 mm. Standard version in single / double-acting, with magnetic piston and adjustable cushioning. A complete range of accessories for mounting and position sensing is available.

The CZ series cylinders are manufactured according to ISO 15552 and have diameters between 32 and 125 mm. Standard version in single / double-acting, with magnetic piston and adjustable cushioning. A complete range of accessories for mounting and position sensing is available. Also available in a special version, as a tandem cylinder or with Viton seals for high temperatures. Version with weight-optimized lightweight profile tube including practical slot for position sensors.

The CY series cylinders are manufactured according to ISO 15552 and have diameters between 32 and 125 mm. Standard version in single / double-acting, with magnetic piston and adjustable cushioning. A complete range of accessories for mounting and position sensing is available. Also available in a special version, as a tandem cylinder or with Viton seals for high temperatures. Version with robust and aesthetic profile tube.

Diameter 32-63mm. Standard version in single / double-acting, with magnetic piston and adjustable cushioning. A complete range of accessories for mounting and position sensing is available.

Housing thermoplastic. Version: Operating principle: Magnetic. Rating: IP67. Note: If the actuator is within the switching range (safety door closed), the safety contacts and, if applicable, the signal contacts of the safety switch are activated. The contact is thus closed via a magnet (magnetic field). Form A: Actuator on one level to the safety switch. Form B: Actuator offset by 90° to the safety switch.

Magnetic tape, magnetised plastic sheet. Carrier band steel. Cover band stainless steel. Version Scale with incremented coding. Pole length 5 mm. Note Simple adhesive mounting; selfassembly possible. Required tape length calculated from measuring path + sensor length "L" + (2 x run or return "B"). L = see drawing of sensor used. B = 10 mm (run and return). Technical data Coefficient of expansion (11 ± 1) x 106/K (spring steel) Temperature range Ambient temperature 20–70°C Storage temperature 40–70°C Assembly Installation using the preaffixed doublesided adhesive tape must be carried out according to the enclosed user information. On request Other lengths from 0.1–100 m, in increments of 0.1 m. Note Relative humidity 100%. Dewing is permissible. Drawing reference 1) Cover band A = 0.176 mm 2) Magnetic tape M = 1.0 mm 3) Carrier band T = 0.3 mm 4) Adhesive tape K = 0.1 mm 5) Required tape length = measuring path + L + 2 x B 6) Measuring path

KEDU Electromagnetic Switch Switch with protection against sudden power cuts. 4 Pole Switch

KEDU Electromagnetic Switch Switch with protection against sudden power cuts. 5 Pole Switch Start-up protection after thermal cut-out For machines. Special prices for quantities

MMS-P | MMS-N (-P positive output | -N negative output) 300mA (limited) output current LED indicators for fault and sensing

Magnetic Pop Up Exhibition Display This best selling display stand is 2.2m high (excluding lights) and 2.5m wide when assembled. It is ideal for 3m x 3m exhibition floor spaces or freestanding in any indoor situation. These stands come with graphic panels to the front aan ends but we can also fit graphics to the rear to make it double sided if required.

Keytracker’s Magnetic Block Systems are a simple key storage and vehicle identification solution, ideally suited to vehicle repair outlets, easily identifying the vehicle in a crowded yard or storage area The Block System includes: 1 Magnetic Block Control Board and 20 coloured and numbered Magnetic Blocks

The Magentic Blocks are available to purchase individually in the colours below.

The easiest and most cost effective way to get started or add to an existing Keytracker solution is with the Complete Block and Keytag System. Includes: 1 x Magnetic Block Control Board 1 x Keytag Hook Board 20 x coloured Magnetic Blocks Numbered 20 x coloured Keytags Numbered (choose the number sequence required from either: 1-20, 21-40, 61-80 or 81-100).

Block control board without the plain or numbered blocks The Block Control Board is also available to purchase individually without the magnetic blocks.

The brightly coloured magnetic blocks are triangular shaped and fitted with powerful magnets inside the fixed non-scratch rubber bases to ensure adhesion to the roof of the vehicle Sold individually or as a set.

Abfad Limited have developed and patented a Magnetic Positioning Aid, for use with rope access techniques. This Magnet System allows the rope access technician to securely lock and anchor themselves into place on any ferrous structures to counteract the forces which would push them away, giving them the stability needed to carry out required work with confidence and precision. Use of this Magnet System provides a clear advantage to productivity, increasing the speed of work. Abfad's Magnet System is designed to be a long lasting high quality item and is constructed from 316L stainless steel to the highest specifications. Abfad’s Magnet System also has a great number of applications in a wide range of industries outside of rope access. PLEASE NOTE THIS DEVICE IS NOT A LIFE SUPPORT MECHANISM AND IS USED FOR POSITIONING AND STABILISING ONLY, ROPE ACCESS TECHNIQUES ARE STILL NEEDED WHILE IN USE.