Heat generators - Import export

When combined with the appropriate gearbox, drylin® linear axes with the new BLDC motors achieve higher speed and greater torque. Energy is used more efficiently, as a result of which EC/BLDC motors are more durable and have a longer service life. Due to the fact that carbon brushes are not used, brushless motors are almost completely wear-resistant, generate less heat and enable longer, uninterrupted operation. The EC/BLDC motors have the same connections as NEMA 17/23/24/34 stepper motors. - Brushless motors enable higher speed and greater torque - Longer operating time and service life - Virtually wear-free - Less heat generated - for all drylin® linear modules and axes with NEMA17/23/24/34 hole pattern

Temperature control of gaseous and liquid media Flat tube heat exchangers are generally used as air / air or air / liquid heat exchangers. Flat tube heat exchangers are used where the (exhaust) air is polluted and the installation space is limited. In heat recovery in particular, there are numerous applications for flat tube heat exchangers as so-called exhaust gas / exhaust air heat exchangers. Little installation space and less pressure loss While the rows of tubes in smooth tube heat exchangers consist of round tubes, the rows of tubes in flat tube heat exchangers have a special profile (see illustration). This special tube profile offers advantages over the round profile in certain applications. Flat tube heat exchangers require less installation space than smooth tube heat exchangers with the same exchange area and are therefore also lighter.

Heat recovery with the help of heat exchangers In industry, waste heat occurs at many points in the production process, which is often released into the environment without being used. In many cases, energy is even used to cool the waste heat flows from production so that they can be released into the environment. Heat exchangers (also called heat exchangers) are used for heat recovery so that the waste heat generated in the production process can be used again in the company. Gaseous or liquid media Waste heat can be in the form of gaseous media (e.g. warm exhaust air, steam, exhaust gases, etc.) or in the form of liquid media (e.g. hot water or other liquids). With the help of heat exchangers, the waste heat can be recovered from both gaseous and liquid media and then made available to the production process at a suitable point as energy in gaseous or liquid media. This process is known as energy recovery or also as heat recovery.

Cooking is your passion and sometimes you lack additional space to prepare meals? Or maybe you travel often and want to be able to cook wherever you are? The Zepter compact induction cooker is the solution for you. It is versatile (8 temperature levels from 60 ° C to 240 ° C and 8 heating power levels from 100 W to 2000 W) and convenient to use - a touch screen with a clear display helps in this. The timer and Hot Plate indicator make cooking even easier. Made of high-quality Schott Ceran glass, the surface is easy to clean. The device is also equipped with a parental lock. Presentation ADVANTAGES OF THE PRODUCT LIGHT, PORTABLE, SAFE, DECORATIVE: COMPLETE YOUR DINING TABLE WITH THIS USEFUL APPLIANCE. It keeps the food warm and looks good on the table. Dazzle your guests with the most modern technology! Rapid heating The heat is generated directly inside the pot. The induction method is fast and efficient.

Temperature control of liquids Tube coil heat exchangers (so-called tube cooling coil heat exchangers) are generally used to control the temperature of liquids. This system can also be used to heat or cool liquids in a controlled manner. Due to their special shape, pipe coil heat exchangers are sometimes also called hairpin heat exchangers. Inexpensive applications The simple and solid structure enables it to be used in cost-effective applications. Coiled tube evaporator systems are ideally suited for brine and glycol applications. Classic variant Coiled tube evaporator systems are a classic and proven variant in the field of heat exchanger systems. Coiled tube heat exchangers are often used in ice storage systems or in the production of cold water units. In ice storage systems, coils can be used to achieve an even build-up of ice around the coils.

DSEC is your trusted partner for the construction of your biomass energy plants. Biomass to energy via cogeneration is a sustainable power source, its valorisation can be done trough many different processes. The choice for the suitable technology depends on its various characteristics (moisture, size, ashes melting point, chlorine content, ashes content, ...). Several applications can be developed, from heat production to power generation or even combined heat and power plant. Through its numerous references in biomass valorization, DSEC is able to provide the right expertise to the customer. De Smet Engineers & Contractors is an actor into the green heat and electricity field, developing realizations from concept to start-up. Thanks to our wide turnkey experience, we may give warranties on the schedule, the investment and the performances. Developed biomass energy via cogeneration projects concern pellet production, biomethanisation, wood chips gasification, straw combustion, sunflower husks, bagasse and other agricultural residues valorization for direct steam production or electricity production with back pressure or condensing turbine. De Smet Engineers and Contractors offers you turnkey solutions fitting with your specific needs, that can start with Conceptual Engineering and FEED studies and finally evolve into a Full EPC biomass energy plant project.

Cane sugar is produced by means of technologies rather similar to those used in a beet sugar plant that are also fully mastered by DSEC. Sugar cane is however a totally different plant compared to sugar beet: whereas sugar beet is sowed and can be harvested after +/- 6 months, cane takes longer to grow but grows back after it has been cut and can therefore be harvested several consecutive years (4 to 6) before being replanted. Cane can be cut either manually or mechanically before being directly processed in the mill. Cane plantation location in relation of the plant is of paramount importance so as to reduce sugar losses by the degradation of the plant after cutting as well as to minimize logistic costs. DSEC will select the most appropriate methodology for extracting the juice from the cane after its first shredding. The extraction operation will be performed using mill tandem or cane diffusion while additional mills will press the residual solid (bagasse) in order to increase its fiber content while additional mills will press the residual solid (bagasse) in order to increase its fiber content. Pressed bagasse will be used as fuel for the plant combined heat and power generation that will generally export electricity on the public grid. The choice between mill tandem and diffuser will be highly dependent on plant capacity, cane characteristics, expected extraction performances and plant general concept.

Due to the combination of materials forming them (polymers, glass, metals etc.), composites have complex surface properties. Atmospheric plasma opens the way to a high-quality surface finish as it allows cleaning and activation in a single stage, facilitating processes such as painting and varnishing. As an ecological and efficient technique, plasma is able to replace the most common toxic treatments. Advantages: - Uniform treatment easily integrated into both automatic and manual production. - delicate care of the part to be treated - Easy to implement, rapid treatment - Complete elimination of wet chemical products in the cleaning process - No neutralisation of the waste water, no elimination costs - No heat or steam generated in the workplace - Highly reliable and efficient cleaning process - Marked improvement in hydrophilic properties - Less staff required

The surface control optic UVO PM with LED illuminants is used for surfaces with high reflection. The high quality product is characterized by its durability, high efficiency and low heat generation. With the help of UV light, the light makes white defects on surfaces visible. Particularly in the automotive sector, it is suitable for: effect paints, textiles, plastics and other materials.

We are a company that specializes in supplying wood pellets and similar products to international customers. We are able to provide high-quality products that meet the specific requirements and quantities requested by our clients. Our team of experts works closely with our clients to understand their needs and provide them with the best solutions. We have a wide range of wood pellet products that are suitable for different application such as heating, industrial usage, and power generation. Our wood pellets are made of high-quality raw materials, which ensures the best quality and heating efficiency. We strive to provide our customers with the highest level of service and satisfaction. Contact us today to find out more about our products and services.