Gas on - Import export

Individual filled gas springs are excluded from replacement. Gas springs are maintenance-free, self-contained systems that are filled with nitrogen under high pressure. For end-of-travel damping and lubrication, a defined amount of oil is also contained inside. The gas springs contain a nonreturn valve in a threaded pin on the pressurised pipe, which allows the pushing force to be lowered at a later time. Gas pressure springs in the sizes 04/12 and 06/15 must be stored and installed with the piston rod extending downwards. As of size 08/19, storage and installation in any orientation is possible. Keep in mind, however, that end-of-travel damping is effective only when the piston rod extends downwards. As a consequence of the physical properties when filling a gas spring, a tolerance range of ±5 % results for the rated pushing force. Gas springs are filled with nitrogen under high pressure and under no circumstances should they be opened or overloaded.

ALFAMAK is one of Turkey's leading gas spring manufacturers. Established in 2003, our company has been operating in the industry for 19 years and has gained a reputation for success. Gas spring is a new technology which comes instead of standard steel or polyurethane springs. A gas spring has a container of compressed Nitrogen gas with Piston Rod , Bush, Rod Rings, Valve etc. The Gas Springs are used in Cold Stamping industry to form, cut and fix the sheet metal inside the die. Many auxiliary materials are used for different purposes in the gas spring. Rod wiper, rod guide and rod seal are used on the inner surface of the bush. The purpose of the rod wiper is to prevent the oil and chips in the die from entering the gas spring. The rod guide is used to carry the load in case of axial force on the rod during use. The most important auxiliary material for sealing is rod/piston seal. It directly affects the performance of the product by keeping the gas in the gas spring.

brass gas orifice hex incircle diameter 0.69 +/- 0.03 inch inner through hole diameter 0.328 +/- 0.010 inch length 0.531 +/- 0.010 inch external thread 5/8-28UN manufactured by CNC lathe turning Soochow Advance Industries Co., Ltd., (website: www.sai-parts.com) supplies custom OEM mechanical parts, industrial fasteners, screws, bolts, nuts, industrial fittings, electronic hardware by precision CNC machining, CNC turning, CNC milling, CNC engineering.

--------

GAS SPRINGS FOR PASSENGER SEATS AND DRIVER SEATS BUS AND TRUCK SPARE PARTS ORIGINAL OR AFTERMARKET. ATEGO, AXOR, ACTROS, TRAVEGO, TOURISMO, SETRA, NEOPLAN, TOURLINER BUSES AND TRUCK SĞPARE PARTS.

10 to 3000kVA generators (gas and diesel)

Analysing the gas quality in the gas network is essential to monitor technical specifications and ensure correct billing. The GasPro is a mobile gas sampler, with which cyclic sampling can be carried out easily and flexibly at any point from dry gas networks. The samples are collected in a sample cylinder in the GasPro and can then be analysed in a laboratory. The GasPro allows the separation of sampling and sample analysis and is therefore more cost effective and flexible than for example fixed installed gas chromatographs.

The test bench is designed for calibration with critically operated nozzles of domestic gas meters or others such as diaphragm gas meters, ultrasonic meters, thermoelectric gas meters. The test bench is specially designed for the calibration of domestic gas meters (bellows gas meters, ultrasonic meters, thermoelectric gas meters). The test bench is modular - 1x6 to 4x6 clamping positions for the gas meters can be combined. Due to the modular design 1 to 12 gas meters can be tested simultaneously. In parallel, up to twelve additional test pieces can be adapted, run in and leak tested. A magazine consisting of three critical nozzles is used as flow transmitter. Optionally, a nozzle drum with nine combinable nozzles can be used. This allows the generation of up to 512 different flow points with highest accuracy.

We offer you standardised complete systems for the measurement of volume & mass flows. We use measuring elements that have established themselves within previously built customer-specific test benches and convince with high measuring accuracy. We develop and manufacture Venturi tubes and nozzles as individual components or as VMF® complete systems. The VenturiMasterFlow® measuring system, VMF® for short, is used for the precise measurement of air or gas volume and mass flows of 100,000 m³/h. The core of the VMF® system is the FlowProcessor, a PC system with the corresponding data acquisition hardware. Venturi nozzles convince by a low remaining pressure loss and are suitable for flow measurement of gases with high temperatures. The software developed under LabVIEW is operated either via touch screen or with mouse and keyboard.

Over the last few years, we at EP-E have designed and introduced a range of primary standards designed for use in calibration laboratories. As a technology partner of the Physikalisch-Technische Bundesanstalt (PTB) in Braunschweig, Germany, our solutions are based on the highest standards. The EP gas bell plungers generate a volume flow which is traceable to the SI units length and time. The pistons are driven by a stepper motor via a spindle. In the initial state one piston is fully retracted and the other fully extended. The volume flow can be set with high precision via the piston cross section and the travel speed. At the end of the calibration process, both pistons are in the opposite position to the initial position.

The rotary gas meters GM4 and GM16 meet the highest demands for reliable and precise reference measurement of smallest quantities up to 0.01 m³/h. They operate according to the direct displacement principle (RPD - rotary positive displacement), in which two counter-rotating pistons convey a fixed volume from the inlet to the outlet of the gas meter with each full revolution. Due to the specially shaped pistons, absolutely pulsation-free operation can be achieved (patent pending). They achieve an excellent measuring accuracy of 0.5 % MW + 0.005 % EW. Both versions are suitable for operation up to 6 bar overpressure. With continuous, absolutely pulsation-free and highly precise flow measurement, the reference gas meters from Ehrler Prüftechnik are the gold standard in the field of small volume measurement. Features: Reference measurement of small flow rates Continuous and absolutely pulsation-free Overpressure operation Excellent measurement accuracy Robust & compact design

Our range of sterile gas filters includes two types of sterile gas filter - PTFE membrane or GF depth media's - and also includes a range of coalescing prefilters that ensure the maximum protection of the final sterile filter. All are designed with minimum operating differential pressure in mind to minimise running costs and to optimise filter service life.

Are you a landlord in Plymouth, Devon or East Cornwall? Do your properties require their annual gas safety certificates? Then MLT Plumbing & Heating can help! We work with landlords, letting agencies, estate agents, property managers and housing associations across the city. We provide a wide range of landlord gas services, including CP12 certificates, annual gas safety inspections and boiler services.

Open Grid Europe owns and operates mobile gas pressure regulating and metering (GPRM) stations which you can use under a comprehensive, bespoke service contract, for example when you want to maintain the gas flow during work on a pipeline or require a temporary feed-in point to your gas grid. Technical details: Pressures of up to 84 bar Volumetric flow rates of 800 to 100,000 m3/h Can be connected to telemetry systems Adjustable pressures, flows and blending ratios Gas quality conversion from H-gas to L-gas, if required Thanks to the modular design of the system we can build a mobile station tailored to your specific needs complete with all necessary modules such as filters, pre-heaters, instrumentation and control equipment.

Our Gas Quality Competence Centre answers chemical analysis and process engineering questions in all matters connected with the transportation and use of natural gas. Our Competence Centre uses high-performance methods and processes for the analysis of gases and accompanying substances and can draw on many years of experience in the operation of our transmission system and cooperation with customers. The full range of our laboratory services if of course also available to other companies and organisations. They include: Determination of natural gas compositions in accordance with DVGW Code of Practise G 260 Natural gas analyses up to C14 Determination of trace concentrations of accompanying substances Water analyses on preheaters in accordance with DVGW Code of Practise G 495 Natural gas safety data sheet and much more Our Gas Quality Competence Centre is certified to DIN EN ISO 9001. The natural gas analysis laboratory is accredited to DIN EN ISO/IEC 17025.

Bespoke solutions for all structures requiring corrosion protection. Our specialists develop new components and undertake research to optimise corrosion protection. They design, build and monitor corrosion protection systems for pipelines, compressor and pumping stations as well as industrial installations, and provide advice, expert opinions and studies. We can calculate the degree of high-voltage interference on pipelines and build protection systems to prevent hazards for individuals as well as AC corrosion. Further information with a full description of our services is provided in our brochure entitled “Intelligent Corrosion Protection”. As a customer you will receive technically sophisticated, efficient and effective products and services from a single source: Germany´s competence leader, e.g. Passive corrosion protection High-voltage interference & AC corrosion Accredited expert services Condition assessment Training

Maintenance and repair work on the natural gas network is generally carried out with the pipeline being gas-free, so the relevant pipe sections are isolated by installing valve assemblies and the gas in the isolated section is vented to atmosphere. By using our mobile compressors – individually or in highly efficient parallel operation – the network operator can transfer the gas from the isolated pipe section to another part of the system so it does not have to be vented to atmosphere. Connection points for the mobile compressors are available e.g. in the area of the main line valves or can generally be retrofitted. It makes economic sense to transfer the gas to another as this guarantees responsible handling of this primary energy source and makes a substantial contribution to protecting the environment. Services offered: Pipeline recompression until lowest residual pressure < 3bar Reduction of methane emissions by up to 95% Responsible handling with primary energy

Open Grid Europe takes over your energy data management. Our employees set your data on the way, monitor the regularity according to legal limits and regulations of the German Association (DVGW), starting from the data retrieval, plausibility, substitute value and disturbance monitoring up to market communication in the currently valid data format. We carry out all daily and / or monthly processes for you.

With the development of CHARM®, Open Grid Europe is providing an efficient leakage control method for natural gas pipeline networks and thus an alternative to the labour intensive practice of conducting on-site inspections of the pipelines with gas detection devices. CHARM® is a highly accurate infrared laser system integrated in a helicopter that is capable of precisely detecting even very low methane concentrations from the air. Even in the case of very complex pipeline topologies, the course of the pipeline can be detected consistently on a large scale during the flight by an automatic, highly precise scanning beam control system (autotracking), thus ensuring a reliable leak tightness inspection of the natural gas pipeline.

In order to protect pipelines from damage (e.g. during construction activities), they are regularly inspected on foot, from a vehicle or helicopter. Practical experience has shown, however, that these methods do not ensure continuous and comprehensive monitoring. PipeMon+® closes this gap, allowing appropriate measures to be taken immediately when a pipeline is suddenly damaged. OGE has developed a pipeline monitoring method based on the principle of cathodic protection (CP). When a cathodically protected pipeline is damaged by construction equipment (excavator, drill, rotary cultivator, etc.), the protective current distribution on the pipeline changes. Using appropriate sensors and special analysis methods, these events can be detected in real time.

The safe and efficient construction and operation of gas transmission systems calls for complex decisions; there are a number of prerequisites that must be met. This applies to many areas such as material selection, component design and sizing, well-founded assessments of the condition of pipelines and facilities based on various test procedures, the determination of the repair and maintenance work required as well as quality assurance for materials, procedures and personnel. We offer a comprehensive service portfolio in this area, based on the experience and know-how gained from the operation of our pipeline network and the technical infrastructure available for this purpose.

The robust, water-proof and impact-resistant construction in combination with easy readable display of Detective+ of Crowcon is a ideal device for portable gas detector For monitoring of a bigger area, up to 12 Detective+ can be connected, whereby in case of alarm of one device all devices will be activated! Easy detection of several gases (up to 4) and due to installation of infrared-sensors (optionally available) sampling of potential high-flammable gases and carbon dioxide is possible! Infrared-sensors are not affected in cases of poisoning of other sensors! Detective+ is based on the successful, worldwide over 55.000 devices sold “Triple Plus”- gas detector! Features of Detective+ Integrated pump (optional) offers rapid response and additional sensor protection Easy readable display Up to 60 hrs. battery operation Very bright red LED-groups provide optival alarm display Extremely loud acoustically alarm tone by emitting siren in all directions (104 dBA @ 1 meter) Sensors...

Xgard of the manufacturer Crowcon is a fixed point gas detector for flammable and toxic gases as well as oxygen. Dangers presented by toxic and flammable gases as well as oxygen levels are unique to each installation. Xgard provides four different versions so you can choose exactly what you need in order to fulfil requirements depending on your site. Xgard Type 1: Intrinsically safe detector for toxic gases and oxygen Xgard Type 2: Ex- proof detector for toxic gases and oxygen Xgard Type 3: Ex- proof detector for flammable gases Xgard Type 4: Ex- proof detector for flammable gases at high temperatures Xgard Type 5: Ex- proof detector for flammable gases with 4-20 mA- output Xgard Type 6: Ex- proof detector on basis thermally conductive Xgard Type 7: Ex- proof hydrogen sulphide detector Xsafe: Detector for flammable gases in safe areas Advantage of Xgard-Detector Engineered for ease of maintenance, running costs are kept to a minimum Simple exchange of sensors by connection...

The small handy, portable methane-leak of detection of the company Crowcon is in use to find out gas losses in areas difficult to access or long distances. ATEX-approval for use in CS- areas! Features of LaserMethane Mini: Detection of loss by toughened safety glass Measuring radius up to 100 meter Precisely measuring through laser-technology Light and compact design Response time approx. 0,1 sec. User programmable alarm level High contrast monitor Display in ppm/meter Approvals for LaserMethane Mini: ATEX - approval II 2G Ex ib op-pr/op-is IIA T1 (device) II 2G Ex ib IIA T1 IP54

Gas-Pro of the company Crowcon is developed for protection in tight, dangerous areas. Gas-Pro offers display up to 5 gases in a compact, robust solution, which Resist tough areas and everyday use! Features of Gas-Pro Measurement up to 5 gases at the same time Clear dispay on top of the device, with two-coloured back lightening Internal pump (optional) Automatic, fail-safe detection of suction adapter Special mode for use before access Three-coloured safety- display Obvious alarm display: vibration alarm, signal tone >95dB and clearly visible red/blue LEDs Integrated, shock-proof casing with protection class IP65 &amp; IP 67 against penetration of water and dust Suitable for use with newest gas test stations, for portable use, wall- or table assembly. Following gases can be measured (max. 5/device): Combustible gases (Ch4; 0-100%LEL) Chlorine (0-5 ppm) Carbon dioxide (0-5 vol.%) Carbon monoxide (0-500 ppm) Ozone (0-1 ppm) Oxygen (5-25 vol.%) Sulphur dioxide (0-10 ppm) Hydrogen...

With the simple, robust and maintenance-free single gas monitor GasAlertClip Extreme of BW-Technologies a reliable monitoring and detection is secured (e.g. personal security) of all threats by single gases, whereby the measured value is displayed in real-time. The operating time is limited to 2 years and absolutely maintenance-free, batteries neither need to be charged nor to be exchanged. Thanks to simple operation time exposure reduces considerably, therefore this device is excellently suitable for industrial applications. Features of GasAlertClip Extreme: Large LCD-display indicates remaining operation lifetime in months, days, and hours Impact- and water-resistant Self-test of all functions of sensor, battery, electronic and acoustic/ optical alarm Compatible with the automatic testing station “BW-MicroDock II” Bright, wide-angles blinking alarm display With integrated vibration alarm for surroundings with higher noise level Daily self-test activated by user Recording and...

Here at Quality Air Service Limited we offer a refurbishment service of all Atlas Copco MD Desiccant Drums this includes replacement of the desiccant media, the top and bottom wear seals and bearings if required. This is a well established product and has been in the market for over 10 years. We offer a service exchange product this reduces downtime for the end user all we ask is the returned item is reusable (this is the centre core and stainless steel cover)