Engine technology - Import export

Planetary gears for igus® stepper motors NEMA 23, 23XL & 34 Increased motor torque Increased brake holding torque 2 installation sizes Reduction gearing of 3 & 5 available Typical applications:Packaging technology, general mechanical engineering, inspection technology/ camera travel drylin® E data sheet - Gearbox for stepper motors GEA-60-..._EN.pdf Planetary gears for igus® stepper motors NEMA 23, 23XL & 34 Increased motor torque Increased brake holding torque 2 installation sizes Reduction gearing of 3 & 5 available Typical applications:Packaging technology, general mechanical engineering, inspection technology/ camera travel

Other information Series 210 Inner height hi: 21 mm Inner widths Bi: 30 - 120 mm bending radii R: 38 - 200 mm Pitch: 30.5 mm The E4.21 series is identical to 210 series and replaces it. E4.21 - E-Chain® with crossbars at every link Series 220 Inner height hi: 28 mm Inner widths Bi: 40 - 300 mm bending radii R: 55 - 250 mm Pitch: 46 mm E-Chain® with crossbars at every link Series 280 Inner height hi: 32 mm Inner widths Bi: 50 - 400 mm bending radii R: 63 - 300 mm Pitch: 56 mm E-Chain® with crossbars at every link Series 380 Inner height hi: 42 mm Inner widths Bi: 50 - 400 mm bending radii R: 75 - 350 mm Pitch: 67 mm E-Chain® with crossbars at every link Series 400 Inner height hi: 56 mm Inner widths Bi: 50 - 600 mm bending radii R: 135 - 500 mm Pitch: 91 mm E-Chain® with crossbars at every link Series 600 Inner height hi: 108 mm Inner widths Bi: 200 - 600 mm bending radii R: 200 - 1000 mm Pitch: 143 mm E-Chain® with crossbars at every link Series 640 Inner height hi: 112 mm Inner widths Bi: 87 - 562 mm bending radii R: 200 - 1000 mm Pitch: 143 mm E-Chain® with crossbars at every link Series 290 Inner height hi: 32 mm Inner widths Bi: 50 - 400 mm bending radii R: 63 - 300 mm Pitch: 56 mm E-Chain® with crossbars at every other link Series 390 Inner height hi: 42 mm Inner widths Bi: 50 - 400 mm bending radii R: 75 - 350 mm Pitch: 67 mm E-Chain® with crossbars at every other link Series 410 Inner height hi: 56 mm Inner widths Bi: 50 - 600 mm bending radii R: 135 - 500 mm Pitch: 91 mm E-Chain® with crossbars at every other link Series 601 Inner height hi: 108 mm Inner widths Bi: 200 - 600 mm bending radii R: 200 - 1000 mm Pitch: 143 mm E-Chain® with crossbars at every other link Series R760 Inner height hi: 28 mm Inner widths Bi: 50 - 300 mm bending radii R: 63 - 250 mm Pitch: 46 mm E-Tube, swivel lid Series R770 Inner height hi: 32 mm Inner widths Bi: 50 - 300 mm bending radii R: 125 - 300 mm Pitch: 56 mm E-Tube, swivel lid Series R780 Inner height hi: 42 mm Inner widths Bi: 50 - 300 mm bending radii R: 125 - 350 mm Pitch: 67 mm E-Tube, swivel lid Series R880 Inner height hi: 56 mm Inner widths Bi: 75 - 462 mm bending radii R: 150 - 500 mm Pitch: 91 mm E-Tube, swivel lid Series R608 Inner height hi: 108 mm Inner widths Bi: 200 - 500 mm bending radii R: 250 - 1000 mm Pitch: 143 mm E-Tube, swivel lid Assembly tool for E4-series For the practical opening and closing of the E4 series. Big savings in assembly time Assembly tool for E4-series IPA certificate: Clean room ISO class 3 (DIN 14644-1) at v = 1 m/s for Series 280.10.100.0 tested ESD classification: Electrically conductive ESD/Atex versions on request Other information Series 210 Inner height hi: 21 mm Inner widths Bi: 30 - 120 mm bending radii R: 38 - 200 mm Pitch: 30.5 mm The E4.21 series is identical to 210 series and replaces it. E4.21 - E-Chain® with crossbars at every link Series 220 Inner height hi: 28 mm Inner widths Bi: 40 - 300 mm bending radii R: 55 - 250 mm Pitch: 46 mm E-Chain® with crossbars at every link Series 280 Inner height hi: 32 mm Inner widths Bi: 50 - 400 mm bending radii R: 63 - 300 mm Pitch: 56 mm E-Chain® with crossbars at every link Series 380 Inner height hi: 42 mm Inner widths Bi: 50 - 400 mm bending radii R: 75 - 350 mm Pitch: 67 mm E-Chain® with crossbars at every link Series 400 Inner height hi: 56 mm Inner widths Bi: 50 - 600 mm bending radii R: 135 - 500 mm Pitch: 91 mm E-Chain® with crossbars at every link Series 600 Inner height hi: 108 mm Inner widths Bi: 200 - 600 mm bending radii R: 200 - 1000 mm Pitch: 143 mm E-Chain® with crossbars at every link Series 640 Inner height hi: 112 mm Inner widths Bi: 87 - 562 mm bending radii R: 200 - 1000 mm Pitch: 143 mm E-Chain® with crossbars at every link Series 290 Inner height hi: 32 mm Inner widths Bi: 50 - 400 mm bending radii R: 63 - 300 mm Pitch: 56 mm E-Chain® with crossbars at every other link Series 390 Inner height hi: 42 mm Inner widths Bi: 50 - 400 mm bending radii R: 75 - 350 mm Pitch: 67 mm E-Chain® with crossbars at every other link Series 410 Inner height hi: 56 mm Inner widths Bi: 50 - 600 mm bending radii R: 135 - 500 mm Pitch: 91 mm E-Chain® with crossbars at every other link Series 601 Inner height hi: 108 mm Inner widths Bi: 200 - 600 mm bending radii R: 200 - 1000 mm Pitch: 143 mm E-Chain® with crossbars at every other link Series R760 Inner height hi: 28 mm Inner widths Bi: 50 - 300 mm bending radii R: 63 - 250 mm Pitch: 46 mm E-Tube, swivel lid Series R770 Inner height hi: 32 mm Inner widths Bi: 50 - 300 mm bending radii R: 125 - 300 mm Pitch: 56 mm E-Tube, swivel lid Series R780 Inner height hi: 42 mm Inner widths Bi: 50 - 300 mm bending radii R: 125 - 350 mm Pitch: 67 mm E-Tube, swivel lid Series R880 Inner height hi: 56 mm Inner widths Bi: 75 - 462 mm bending radii R: 150 - 500 mm Pitch: 91 mm E-Tube, swivel lid Series R608 Inner height hi: 108 mm Inner widths Bi: 200 - 500 mm bending radii R: 250 - 1000 mm Pitch: 143 mm E-Tube, swivel lid Assembly tool for E4-series For the practical opening and closing of the E4 series. Big savings in assembly time Assembly tool for E4-series E-Chain® selection aids You can find the right E-Chain® quickly by entering concrete parameters and with the aid of a comparison table. Selection aids Installation instructions Joining, separating and opening of the E-Chain® and E-Tubes. Assembly Instructions Application examples Applications in various industrial sectors and in the igus® test laboratory. System E4/00 E4/00-E-Chain® with 4-piece structure The low-noise E4 chain Further noise reduction with sound dampers (E4/101 series) Wide application range Numerous interior separation options Large accessory kits Widths up to 2000 mm through extension links Snap-open along both sides Max. travel distance: Over 200 m Typical industrial sectors and applications Robotics and handling systems Materials-Handling Technology Refrigeration engineering Construction machinery Machine tools Wood working Any type of machines Semiconductor Clean room applications cold storage houses Welding machines Maritime applications General mechanical engineering etc. IPA certificate: Clean room ISO class 3 (DIN 14644-1) at v = 1 m/s for Series 280.10.100.0 tested ESD classification: Electrically conductive ESD/Atex versions on request

Overview of E4.1 benefits Additional information Series E4.21 Inner height hi: 21 mm Inner widths Bi: 30 - 120 mm bending radii R: 38 - 200 mm Pitch: 30.5 mm E-Chain® with crossbars at every link Series E4.28 Inner height hi: 28 mm Inner widths Bi: 40 - 300 mm bending radii R: 55 - 250 mm Pitch: 46 mm E-Chain® with crossbars at every link Series E4.32 Inner height hi: 32 mm Inner widths Bi: 50 - 400 mm bending radii R: 63 - 300 mm Pitch: 56 mm E-Chain® with crossbars at every link Series E4.42 Inner height hi: 42 mm Inner widths Bi: 50 - 400 mm bending radii R: 75 - 350 mm Pitch: 67 mm E-Chain® with crossbars at every link Series E4.56 Inner height hi: 56 mm Inner widths Bi: 50 - 600 mm bending radii R: 135 - 500 mm Pitch: 91 mm E-Chain® with crossbars at every link Series E4.80 Inner height hi: 80 mm Inner widths Bi: 50 - 600 mm bending radii R: 150 - 1000 mm Pitch: 111 mm E-Chain® with crossbars at every link Series 1640 Inner height hi: 112 mm Inner widths Bi: 50 - 600 mm bending radii R: 200 - 600 mm Pitch: 143 mm E-Chain® with crossbars at every link E4.112 series Inner height hi: 112 mm Inner widths Bi: 50 - 600 mm bending radii R: 200 - 1000 mm Pitch: 143 mm E-Chain® with crossbars at every link E4.162 series Inner height hi: 162 mm Inner widths Bi: 200 - 600 mm bending radii R: 250 - 1000 mm Pitch: 200 mm E-Chain® with crossbars at every link Series 800 Inner height hi: 200 mm Inner widths Bi: 200 - 600 mm bending radii R: 325 - 1000 mm Pitch: 250 mm E-Chain® with crossbars at every link Series 840 Inner height hi: 204 mm Inner widths Bi: 100 - 563 mm bending radii R: 325 - 1000 mm Pitch: 250 mm E-Chain® with crossbars at every link Series E4.350 Inner height hi: 350 mm Inner widths Bi: 400 - 800 mm bending radii R: 500 - 1000 mm Pitch: 470 mm E-Chain® with crossbars at every link Series H4.32 Inner height hi: 32 mm Inner widths Bi: 50 - 400 mm bending radii R: 63 - 300 mm Pitch: 56 mm E-Chain® with crossbars at every other link Series H4.42 Inner height hi: 42 mm Inner widths Bi: 50 - 400 mm bending radii R: 75 - 350 mm Pitch: 67 mm E-Chain® with crossbars at every other link Series H4.56 Inner height hi: 56 mm Inner widths Bi: 50 - 600 mm bending radii R: 135 - 500 mm Pitch: 91 mm E-Chain® with crossbars at every other link Series H4.80 Inner height hi: 80 mm Inner widths Bi: 50 - 600 mm bending radii R: 150 - 1000 mm Pitch: 111 mm E-Chain® with crossbars at every other link Series H4.112 Inner height hi: 112 mm Inner widths Bi: 50 - 600 mm bending radii R: 200 - 1000 mm Pitch: 143 mm E-Chain® with crossbars at every other link Series R4.28 Inner height hi: 28 mm Inner widths Bi: 50 - 300 mm bending radii R: 63 - 250 mm Pitch: 46 mm E-Tube, swivel lid Series R4.32 Inner height hi: 32 mm Inner widths Bi: 50 - 300 mm bending radii R: 125 - 300 mm Pitch: 56 mm E-Tube, swivel lid Series R4.42 Inner height hi: 42 mm Inner widths Bi: 50 - 300 mm bending radii R: 125 - 350 mm Pitch: 67 mm E-Tube, swivel lid Series R4.56 Inner height hi: 56 mm Inner widths Bi: 75 - 462 mm bending radii R: 150 - 500 mm Pitch: 91 mm E-Tube, swivel lid Series R4.80 Inner height hi: 80 mm Inner widths Bi: 150 - 460 mm bending radii R: 200 - 1000 mm Pitch: 111 mm E-Tube, swivel lid Series R1608 Inner height hi: 112 mm Inner widths Bi: 200 - 400 mm bending radii R: 250 - 600 mm Pitch: 143 mm E-Tube, swivel lid R4.112 series Inner height hi: 112 mm Inner widths Bi: 200 - 400 mm bending radii R: 250 - 1000 mm Pitch: 143 mm E-Tube, swivel lid Assembly tool for E4-series For the practical opening and closing of the E4 series. Big savings in assembly time Assembly tool for E4-series IPA classification -Report IG 1303-640, tested E4.32.10.063.0 41 dB(A) determined at the igus® laboratory, v = 1.8 m/s unsupported ESD classification: Electrically conductive ESD/Atex versions on request System E4.1 proven in long travels e-tubes available as special design with HT material for 850°C hot chips Overview of E4.1 benefits Additional information Series E4.21 Inner height hi: 21 mm Inner widths Bi: 30 - 120 mm bending radii R: 38 - 200 mm Pitch: 30.5 mm E-Chain® with crossbars at every link Series E4.28 Inner height hi: 28 mm Inner widths Bi: 40 - 300 mm bending radii R: 55 - 250 mm Pitch: 46 mm E-Chain® with crossbars at every link Series E4.32 Inner height hi: 32 mm Inner widths Bi: 50 - 400 mm bending radii R: 63 - 300 mm Pitch: 56 mm E-Chain® with crossbars at every link Series E4.42 Inner height hi: 42 mm Inner widths Bi: 50 - 400 mm bending radii R: 75 - 350 mm Pitch: 67 mm E-Chain® with crossbars at every link Series E4.56 Inner height hi: 56 mm Inner widths Bi: 50 - 600 mm bending radii R: 135 - 500 mm Pitch: 91 mm E-Chain® with crossbars at every link Series E4.80 Inner height hi: 80 mm Inner widths Bi: 50 - 600 mm bending radii R: 150 - 1000 mm Pitch: 111 mm E-Chain® with crossbars at every link Series 1640 Inner height hi: 112 mm Inner widths Bi: 50 - 600 mm bending radii R: 200 - 600 mm Pitch: 143 mm E-Chain® with crossbars at every link E4.112 series Inner height hi: 112 mm Inner widths Bi: 50 - 600 mm bending radii R: 200 - 1000 mm Pitch: 143 mm E-Chain® with crossbars at every link E4.162 series Inner height hi: 162 mm Inner widths Bi: 200 - 600 mm bending radii R: 250 - 1000 mm Pitch: 200 mm E-Chain® with crossbars at every link Series 800 Inner height hi: 200 mm Inner widths Bi: 200 - 600 mm bending radii R: 325 - 1000 mm Pitch: 250 mm E-Chain® with crossbars at every link Series 840 Inner height hi: 204 mm Inner widths Bi: 100 - 563 mm bending radii R: 325 - 1000 mm Pitch: 250 mm E-Chain® with crossbars at every link Series E4.350 Inner height hi: 350 mm Inner widths Bi: 400 - 800 mm bending radii R: 500 - 1000 mm Pitch: 470 mm E-Chain® with crossbars at every link Series H4.32 Inner height hi: 32 mm Inner widths Bi: 50 - 400 mm bending radii R: 63 - 300 mm Pitch: 56 mm E-Chain® with crossbars at every other link Series H4.42 Inner height hi: 42 mm Inner widths Bi: 50 - 400 mm bending radii R: 75 - 350 mm Pitch: 67 mm E-Chain® with crossbars at every other link Series H4.56 Inner height hi: 56 mm Inner widths Bi: 50 - 600 mm bending radii R: 135 - 500 mm Pitch: 91 mm E-Chain® with crossbars at every other link Series H4.80 Inner height hi: 80 mm Inner widths Bi: 50 - 600 mm bending radii R: 150 - 1000 mm Pitch: 111 mm E-Chain® with crossbars at every other link Series H4.112 Inner height hi: 112 mm Inner widths Bi: 50 - 600 mm bending radii R: 200 - 1000 mm Pitch: 143 mm E-Chain® with crossbars at every other link Series R4.28 Inner height hi: 28 mm Inner widths Bi: 50 - 300 mm bending radii R: 63 - 250 mm Pitch: 46 mm E-Tube, swivel lid Series R4.32 Inner height hi: 32 mm Inner widths Bi: 50 - 300 mm bending radii R: 125 - 300 mm Pitch: 56 mm E-Tube, swivel lid Series R4.42 Inner height hi: 42 mm Inner widths Bi: 50 - 300 mm bending radii R: 125 - 350 mm Pitch: 67 mm E-Tube, swivel lid Series R4.56 Inner height hi: 56 mm Inner widths Bi: 75 - 462 mm bending radii R: 150 - 500 mm Pitch: 91 mm E-Tube, swivel lid Series R4.80 Inner height hi: 80 mm Inner widths Bi: 150 - 460 mm bending radii R: 200 - 1000 mm Pitch: 111 mm E-Tube, swivel lid Series R1608 Inner height hi: 112 mm Inner widths Bi: 200 - 400 mm bending radii R: 250 - 600 mm Pitch: 143 mm E-Tube, swivel lid R4.112 series Inner height hi: 112 mm Inner widths Bi: 200 - 400 mm bending radii R: 250 - 1000 mm Pitch: 143 mm E-Tube, swivel lid Assembly tool for E4-series For the practical opening and closing of the E4 series. Big savings in assembly time Assembly tool for E4-series IPA Classification Report IG 1303-640, tested series E4.32.10.063.0 E-Chain® selection aids You can find the right E-Chain® quickly by entering concrete parameters and with the aid of a comparison table. Selection aids Assembly instruction video Assembly video with accurate description for joining, splitting and opening e-chains® and e-tubes. Installation instructions Application examples Applications in various industrial sectors and in the igus® test laboratory. E 4.1 E4.1-E-Chain® with 4-piece structure Smooth, cable friendly inner surfaces Low noise operation through integrated "brake" on the radial stop dogs Sound dampers as an additional noise-reducing option Wide application range Numerous interior separation options Large accessory kits Widths up to 2000 mm through extension links To open on both sides Max. travel distance: Over 200 m Typical industrial sectors and applications: Krane Indoor Cranes Composting systems Sewage treatment plants Machine tools General mechanical engineering Materials-Handling Technology Refrigeration engineering Construction machinery Wood working Robotics and handling systems IPA classification -Report IG 1303-640, tested E4.32.10.063.0 41 dB(A) determined at the igus® laboratory, v = 1.8 m/s unsupported ESD classification: Electrically conductive ESD/Atex versions on request System E4.1 proven in long travels e-tubes available as special design with HT material for 850°C hot chips

Technical translation service by professional technical translators specialized in Accounting, Finance, Packaging, Acoustic engineering, Fluid physics, Paper technology, Advertising, Food technology, Petroleum industry, Aerodynamics, Petrology, Aeronautics, Forestry, Pharmacology, Agriculture, Gas technology, Photography, Geodesy, Physics, Air conditioning, Geography, Plastic-rubber, Geology, Anatomy, Geophysics, Printing, Architecture, Geomagnetism, Production engineering, Armament, Heat engineering, Psychiatry, Artillery, Horticulture, Quality assurance, Astronomy, Hydraulics, Radio, Astrophysics, Hydromechanics, Railway engineering, Hydrology, Refrigeration, Automatics, Illumination, Automation, Illuminating engineering, Robotics, Automotive engineering, Industrial heating, Safety engineering, Aviation, Informatics, Avionics, Information technology, Solar technology, Bank, Insurance, Space technology, Biochemistry, Internet, Statistics, Biotechnology, Inorganic chemistry, Botany.

Special cylinders developed and manufactured according to individual customer requirements, specifications or specifications. Both as a completely custom-made special cylinder or modified inexpensively using standard elements with adjustments in form, function, mount, connection or material.

In cooperation with our system partners, we offer you various all-around solutions in the field of handling systems in plant engineering & conveyor technology. In addition to these complete solutions, we also take on the development of various plant parts and/or system components: Manipulators, grippers Transfer stations Safety equipment Workpiece carriers Control cabinets Peripheral equipment Podiums, stairs Media transfer Feeder systems Ejector systems Manual workstations Design focal points: Design & constructional drafts Use of pneumatic and/or electric drives Space-saving lifting stations Construction in accordance with relevant guidelines and regulations Static & dynamic calculation of the construction Material & weight optimization of existing and new systems Project planning to initial start-up of complete automation solutions Optimization and conversion of existing systems

Daubert Cromwell Premium MetalGuard® VCI Film Rolls offer superior corrosion protection for metals during storage and shipment. Engineered with VpCI® technology, this high-quality film effectively inhibits rust without oils, desiccants, or chemicals. The multi-layer polyethylene film is strong, tear-resistant, and transparent, allowing easy inspection. Embedded VpCI® molecules vaporise, forming a protective layer on all metal surfaces, including hard-to-reach areas. This invisible shield protects ferrous and non-ferrous metals for up to 5 years. The film also acts as a barrier against moisture, dirt, and contaminants, ensuring optimal preservation. Ideal for metal parts, electronics, machinery, and more. Available in various sizes, with custom options. Valdamark Direct is an authorised distributor offering expert guidance and additional VCI products.

Another working area of the Suvis GmbH is the field of innovative sensor systems applied to particle and flow measurements taking into account microsystems. We develop novel flow and particle sensor systems for the application in environmental technology, process and mechanical engineering, and automotive technology. Important aspects are robustness and economicalness of the complete sensor system in order to create for the above mentioned application fields practical and affordable solutions. The respective sensor system will be developed as a whole solution. This means besides the hardware set up that we also take care of the evaluation of the sensor signals with our own solutions. We develop from scratch up to prototype level including periphery technology development. Please contact us for a not binding offer. We would like to know more about your challenge!

Our company provides a full range of services for the development and implementation of automated process control systems for industrial enterprises. We are ready to help with the design, modernization, start-up and maintenance of various production lines or individual units of technological processes. 1423 engineering projects have been completed in close cooperation with the technologists and design teams of our clients. We automate existing production facilities, participate in the development and installation of facilities under construction, supply equipment and carry out commissioning, perform further technical and service maintenance. For today, our team is more than 150 people: engineers, managers, equipment installation and maintenance specialists. Be assured – we will carefully study your tasks and provide the best solutions.