Results for
RM2M
France
Electromagnets 200, 500 and 950 kg with permanent magnet for cold loads Self-contained battery model. Operating Modes: Manual: Simple use with buttons to activate or deactivate magnetization. Automatic: Quick activation and deactivation of magnet without manual order, ideal for hard-to-reach areas (no need to control with pendant button to take or release the load). Flexibility: Equipped with 3 power levels, they allow for sheet metal depiling. Benefits: Since it is a permanent magnet electromagnet, the battery is only used during demagnetizations, which gives it a long autonomy. There is no risk that the load falls because it is an electromagnet with permanent magnet. They are equipped with a force sensor that prevents the release of the load if the load is not put on the ground (which naturally prevents dropping).
Request for a quoteCIC - KLAUS CZERWONKA
Germany
With linear continuous signal to indicate tank content
Request for a quoteCIC - KLAUS CZERWONKA
Germany
Available in many versions for use in a wide variety of media such as water, acids, oils, fuels, etc. Float and housing in plastic Versions for mounting vertically or horizontally With cable outlet or plug connection
Request for a quoteMAGAGER, UNIPESSOAL, LDA
Portugal
KEDU Electromagnetic Switch Switch with protection against sudden power cuts. 4 Pole Switch
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
CIC - KLAUS CZERWONKA
Germany
Electromagnetic cylinders and actuators for use in applications where compressed air is either not available, too expensive, too slow or for other reasons is not the optimal solution.
Request for a quoteCIC - KLAUS CZERWONKA
Germany
Available in brass, aluminum, stainless steel, various float types and with ATEX approval for use in a wide variety of media such as water, acids, oils, fuels, etc. Installation Vertical and 45° / 90° curved With cable outlet or plug connection
Request for a quoteIMPULS (SYSTEMTECHNIK)
Russia
UPS series MINI are designed for uninterruptible power supply of critical loads with high power density server and network equipment, voice and data networks, medical equipment and entrylevel industrial installations. The MINI series is a new generation of UPS with double conversion (online) topology and fully digital control, which provides a high level of protection for the continuous operation of the connected load, which prevents costly downtime. In keeping with high fire safety requirements, the MINI series IMPULSE UPS enclosures are made of impactresistant, fireresistant ABS plastic. This inherently ensures the shock resistance and fire safety of the electrical protection equipment.
Request for a quoteCOMITRONIC BTI
France
No power or under-voltage locking on machine casings Machine protection closing control for harsh environments Antimicrobial handle available Level of performance with AWAX controller: up to PL = e Safety category: up to 4 with AWAX controller or PLC SIL 3 Time before dangerous failure: MTTFd = 100 years Maximum detection activation distance: 2 mm Holding force: up to 936 N (ref. version + OX-R) or up to 820 N (ref. version + OX-E) Safety contacts/diagnostics: 2 x NO 400mA max/24V redundant and 1 x PNP 250mA Detection encoding: mono-code inviolable Reset: automatic or controlled (ref. + OP) Housing mount: 4 tamper-proof M6 screws (optional ref: BH6) Handle attachment: 2 M8 screws Mounting position: 1 Casing material: 316L stainless steel mirror polished (OX version) Suction cup material: Magnetic INOX (ref. + OX) Electrical Connection: 50cm PUR cord with M12 connector Water resistance: IP 67/68 Temperature: -25°C to +50°C (thermal protection for suction cups in case of overheating due to a persistent command) Marking: laser engraving with mechanically punched serial number for permanent traceability
Request for a quoteCOMITRONIC BTI
France
No power or under-voltage locking on machine casings Machine protection closing control for harsh environments 100% stainless steel version available Level of performance with AWAX controller: up to PL = e Safety category: up to 4 with AWAX controller or PLC SIL 3 Time before dangerous failure: MTTFd = 100 years Maximum detection activation distance: 2 mm Holding force: up to 580 N Safety contacts/diagnostics: 2 x NO 400mA max/24V redundant and 1 x PNP 250mA Detection encoding: mono-code inviolable Indicator: LED Reset: automatic or controlled (ref. + OP) Attachment: 4 M4 screws (inviolable on new generation and optional ref.: BH4) Mounting position: 1 Casing material: INOX316L mirror polished (OX version) or POLYCARBONATE (PL version) Suction cup material: INOX (SM1 + OX) or steel (SM1 + PL-AC) Electrical connection: the M12 metal base will be replaced with a 50cm PUR cord with an M12 connector on the new generation Water resistance: IP 67/68 Temperature: -25°C to +50°C. Marking: laser engraving with mechanically punched serial number for permanent traceability (OX version) or screen printed serial number for traceability (PL version)
Request for a quoteFLOW-TRONIC
Belgium
The EMV-500 is a water/wastewater electromagnetic velocity open channel flowmeter sensor which is available in two sizes: SIZE A is suited for pipes or channels from 150 mm to 500 mm diameter SIZE B is suited for pipes or channels from 500 mm to 2.000 mm diameter. The sensor is encapsulated in an IP68 submersible ultra high molecular polyethylene body to be mounted with a special sensor mounting band in the pipe. When combined with the appropriate level sensor, the EMV-500 constitutes an efficient electromagnetic area/velocity flowmeter measuring both velocity and level in the same cross-section (or slice of pipe). This is a requirement necessary for accurate flow rate measurement using the continuity equation: Q = v x A In addition, electromagnetic sensors are totally unaffected by the concentration of debris or dilution of wastewater by rain. Key Features: Accurate flow measurements Grease tolerant: Grease shedding electrodes allow for reliable data collection
Request for a quoteFLOW-TRONIC
Belgium
The AVI-MAG (or MULTI-MAG for Russia & CIS-countries) is a hot tap full profile electromagnetic insertion flow meter. Multiple electrodes placed across the entire sensor body at equal area, measure and report the average flow rate over the full diameter of the pipe. The specific design of the multi-electrode sensor compensates for variable flow profiles, including swirl and turbulent conditions and allows installation without calibration on site. The AVI-MAG can be installed without shutting down, emptying or cutting the pipe (hot tap installation). It does not require welding flanges and installation can be done in pressurized pipelines up to 16 bar. Cost of installation is largely reduced by eliminating the need for heavy equipment (cranes, etc.) or extensive manpower. The AVI-MAG is the most economical flow metering solution for medium and large pipe sensor sizes, reducing drastically installation costs.
Request for a quoteATLANTIS INSTITUTE
Ireland
Aura and Chakra Anatomy Practioner Diploma Course This course Aura and Chakra Anatomy Energy has Four modules to be completed over a Four-month period, the time can be extended.
Request for a quoteResults for
Electromagnets - Import exportNumber of results
14 ProductsCompany type