Cylinders - Import export

Stop valves for shutting off and locking in the event of an unintentional drop in pressure. Pneumatically unlockable, for direct installation in the cylinder air connection.

Quick exhaust valves made of nickel-plated brass. For quick bleeding of cylinders and systems. On request also fully assembled with hose connections and exhaust air silencer. Available in sizes M5 – 1/2

The VY solenoid valves are robust, reliable and can be installed in a variety of ways. Installation in-line, on the wall, on modules, as a battery or directly on cylinders is possible without any problems. Available sizes between 1/8, 1/4 and 1/2 in 3/2, 5/2 and 5/3.

Solenoid valves for direct mounting on the pneumatic actuator or cylinder. Cylinder and valve become a compact unit thanks to simple installation in the air connection. Available in sizes 1/8 and 1/4 and with all common solenoid voltages. With manual override.

Pneumatic cylinder RI with a closed oil circuit system to regulate the travel speed when retracting and/or extending. Also with skip and stop function.

The stopper cylinders are developed to stop or block moving parts, e.g. in an assembly line. The large dimensioned piston rod also allows use as a stand-by stop device.

Guide units for attaching cylinders according to ISO 6432 and VDMA 15552. For moving heavy loads with high speed and positioning accuracy.

The compact, guided cylinder CC is a linear drive with a lot of power and minimal dimensions. Generously dimensioned guide rods on plain bearings or ball bearings open up a wide range of application options in variable positioning with and without sensor queries.

The compact, guided cylinder CC is a linear drive with a lot of power and minimal dimensions. Generously dimensioned guide rods on plain bearings or ball bearings open up a wide range of application options in variable positioning with and without sensor queries.

The mini cylinders of the CH series are cylinders with extremely reduced dimensions. For space-saving screwing, also with O-ring seals, in shaped holes or for panel mounting.

Sensors and proximity switches for pneumatic cylinders according to ISO 6432 and ISO 15552.

Fastening elements, bearings and add-on elements for pneumatic cylinders according to ISO 6432 and ISO 15552.

Rodless linear drives allow stroke lengths of up to 6000 mm with a reduced overall length. Stable guidance and durable sealing system even at high speeds and temperatures.

The CD short-stroke cylinders have been developed to ensure high performance in a very small space. Sensors can be integrated in the cylinder housing. Available versions: single / double acting or with through piston rod.

Thanks to their compact but stable design, the CM compact cylinders are particularly suitable for use in small spaces. Diameter range between 20 and 63 mm. Also with anti-twist device.

Great thrust and small installation space. CP cylinder diameter 125 - 200 mm in a compact but robust design.

With all the properties and variants of our standard cylinders DIN / ISO 15552. Completely made of stainless steel for use in harsh environments, marine, pharmaceutical and food industries.

The new generation of our pneumatic cylinders according to ISO 15552. Light and robust thanks to innovative design and high-quality materials. An aluminum piston with wear protection, reinforced bronze guides and our MF5 multifunction system with improved damping, centering and sealing ensure maximum reliability even under extreme conditions.

Pneumatic standard cylinder according to DIN / ISO 6432. Available in diameters between 8 and 25 mm. Standard version in single / double-acting, with magnetic piston and adjustable cushioning. A complete range of accessories for mounting and position sensing is available.

Series of cylinders entirely in stainless steel. Ideal for applications in the food industry and aggressive environments. Available in three sizes 16-20-25 mm.

The CQ series cylinders are manufactured according to ISO 15552 and have diameters between 160 and 250 mm. Standard version in single / double-acting, with magnetic piston and adjustable cushioning. A complete range of accessories for mounting and position sensing is available.

Cylinder with double piston rod as anti-rotation device against linear movement of the piston rod. Design based on ISO standard. Available sizes diameter: 32, 40, 50, 63, 80, 100 mm.

Double-acting special cylinders with a customer-specific base flange, pre-assembled with fork mounts with flexible rubber bellows over the piston rod to protect against coarse dirt and aggressive environments. Specially designed for use in commercial vehicles or agricultural machinery.

Doubleacting pneumatic cylinder in constructionoptimised design acc. to DIN ISO 15552. Piston rod with external thread, position detection and adjustable pneumatic damping. Due to their robust construction, these cylinders are the preferred choice for numerous applications.

Doubleacting pneumatic cylinder acc. to DIN ISO 21287. Piston rod with internal or external thread, position detection for proximity switch and flexible damping on both sides. Thanks to their compact structural dimensions, compact cylinders are ideal for use in installation spaces where space is limited.

Doubleacting pneumatic cylinder acc. to DIN ISO 6432. Piston rod with external thread, position detection for proximity switch and flexible damping on both sides.

Housing hardened and black oxidised. Contact faces ground. Note: This positioning and clamping system is especially suitable for installation in fixtures (plates, clamping tower blocks, etc.) in all mounting positions. The modular design allows the number of and distance between the locating cylinders to be ideally adjusted to suit the clamping task. Due to the small diameters, the spacing between the locating cylinders can also be reduced. The 3 clamping balls are mechanically released through control of the locating cylinder with the "opening" connection. The 3 clamping balls move inward and the fixture can be changed quickly. For clamping, the air is taken from the "opening" connection and the "clamping" connection then receives air on the locating cylinder. The 3 clamping balls are mechanically driven outward again and the new fixture is clamped. To achieve optimal retaining force, the locating cylinder remains connected to the air.

Special cylinders developed and manufactured according to individual customer requirements, specifications or specifications. Both as a completely custom-made special cylinder or modified inexpensively using standard elements with adjustments in form, function, mount, connection or material.

Pneumatic cylinders according to the norm, standard or special design, completely configured ready for installation and pre-assembled with add-on parts, bearing elements, compressed air connections, position sensors or control valves according to customer specifications.