Chemical materials - Import export

Good with chemicals d1 [mm]: Rings: Cage: Balls: xiros® material data xiros® polymer ball bearing design, applications, development and testing xiros® chemical resistance xirodur® C160 radial grooved ball bearing The ball bearing material xirodur® C160 offers extreme media resistance, but is inexpensive. xirodur® C160 can be used in the temperature range of up to +80°C. Lubricant- and maintenance-free Resistant to corrosion and chemicals Nonmagnetic and washable Life time predictable Lightweight Low friction Electrically insulating Industries: Electroplating, chemical industry, plant design d1 [mm]: Rings: Cage: Balls:

Lightweighting, freedom of design and cost reduction are the drivers for every application and sector. For this reason, Silga is increasingly called upon by its Customers to become a partner in the development of solutions that achieve this objective. Especially if they are non-standard solutions. One of the most important and successful is that of FLEXIBLE HEATERS . In this area, in fact, skills related to: Flexible PCB's Alternative materials Chemical etching capability of metals other than copper Know How in using functional inks Exclusive surface finishes developed by Silga. Production lines adequate for the required volumes

Long version! Protect against dirt and corrosion and are resistant to all weather influences and a lot of chemicals. Applicable with washer. Material: PE Colours: last digits 500 = white without last digits = black

Long version! Protect against dirt and corrosion and are resistant to all weather influences and a lot of chemicals. Applicable without washer. Material: PE Colours: last digits 500 = white without last digits = black

Short version! Protect against dirt and corrosion and are resistant to all weather influences and a lot of chemicals. Applicable with washer. Material: PE Colours: last digits 500 = white without last digits = black

Our Gas Quality Competence Centre answers chemical analysis and process engineering questions in all matters connected with the transportation and use of natural gas. Our Competence Centre uses high-performance methods and processes for the analysis of gases and accompanying substances and can draw on many years of experience in the operation of our transmission system and cooperation with customers. The full range of our laboratory services if of course also available to other companies and organisations. They include: Determination of natural gas compositions in accordance with DVGW Code of Practise G 260 Natural gas analyses up to C14 Determination of trace concentrations of accompanying substances Water analyses on preheaters in accordance with DVGW Code of Practise G 495 Natural gas safety data sheet and much more Our Gas Quality Competence Centre is certified to DIN EN ISO 9001. The natural gas analysis laboratory is accredited to DIN EN ISO/IEC 17025.

Aluminum tube 600ml Aluminum tube, turnable, with aluminum screw connections at front and back Suitable for 600ml 1K sausage packs or 310ml to 600ml cartridges Application example: suitable for auto windscreen adhesive, hybrid adhesive... Lithium-ion battery with 14.4V // 2.0AH with LED charge indicator Rapid charger with battery charge and status indicator, charging time approx. 40 minutes Supplied in transport case Drive Extrusion power 6500N (650kg) Extrusion rate with speed control 120 – 240mm/min Automatic pressure reduction to avoid chemical materials drops out Performance: 55 cartridges of 310ml Silicone for a fully charged battery at room temperature Benefits Rack unlocking over an unlock switch Fix speed setup over an additional switch (300mm / min.) LED battery charge indicator on the battery Continuous and clean work Less fatigue while processing high viscosity adhesives Automatic pressure reduction to avoid chemical materials drops out Free of annoying air tube or electr

Aluminum tube 400ml Aluminum tube, turnable, with plastic screw connections at front and back Suitable for 310 or 400ml 1K cartridges or sausage packs Application example: kitchen and bathroom tile joints, acrylic joint adhesive… Lithium-ion battery pack with 3.6V // 1.5AH with LED charge indicator Rapid charger with battery charge and status indicator, charging time approx. 30 minutes Supplied in transport case Drive Extrusion power 3000N (300kg) Extrusion rate with speed control 50 – 330mm/min Automatic pressure reduction to avoid chemical materials drops out. Performance: 30 cartridges of 310ml Silicone for a fully charged battery at room temperature. Benefits Continuous and clean work. Less fatigue while processing high viscosity adhesives. Automatic pressure reduction to avoid chemical materials drops out. Free of annoying air tube or electric cable on working place. Charger: IP30 // Class 2 Input: 100 – 240 V ~ 50/60Hz 30W Output: 3.6V A 2A CE checked and GS proved Packaging Dyn

Aluminum tube 400ml Aluminum tube, turnable, with aluminum screw connections at front and back Suitable for 310 to 400ml 1K cartridges or sausage packs Application example: suitable for auto windscreen adhesive, hybrid adhesive ... Lithium-ion battery with 14.4V // 2.0AH with LED charge indicator Rapid charger with battery charge and status indicator, charging time approx. 40 minutes Supplied in transport case Drive Extrusion power 6500N (650kg) Extrusion rate with speed control 120 – 240mm/min Automatic pressure reduction to avoid chemical materials drops out Performance: 55 cartridges of 310ml Silicone for a fully charged battery at room temperature Benefits Rack unlocking over an unlock switch Fix speed setup over an additional switch (300mm / min.) LED battery charge indicator on the battery Continuous and clean work Less fatigue while processing high viscosity adhesives Automatic pressure reduction to avoid chemical materials drops out Free of annoying air tube or electric cabl

Aluminum tube 400ml Aluminum tube, turnable, with aluminum screw connections at front and back Suitable for 310 to 400ml 1K cartridges or sausage packs Application example: from kitchen and bathroom tile joints to auto windscreen adhesive Lithium-ion battery pack with 10.8V // 1.5AH with LED charge indicator Rapid charger with battery charge and status indicator, charging time approx. 30 minutes Supplied in transport case Drive Extrusion power 5000N (500kg) Extrusion rate with speed control 50 – 330mm/min Automatic pressure reduction to avoid chemical materials drops out. Performance: 45 cartridges of 310ml Silicone for a fully charged battery at room temperature. Benefits Continuous and clean work. Less fatigue while processing high viscosity adhesives. Automatic pressure reduction to avoid chemical materials drops out. Free of annoying air tube or electric cable on working place Charger: IP30 // Class 2 Input: 100 – 240 V ~ 50/60Hz 30W Output: 10.8V A 2A Security: CE and GS checked