Brushless motors - Import export

When combined with the appropriate gearbox, drylin® linear axes with the new BLDC motors achieve higher speed and greater torque. Energy is used more efficiently, as a result of which EC/BLDC motors are more durable and have a longer service life. Due to the fact that carbon brushes are not used, brushless motors are almost completely wear-resistant, generate less heat and enable longer, uninterrupted operation. The EC/BLDC motors have the same connections as NEMA 17/23/24/34 stepper motors. - Brushless motors enable higher speed and greater torque - Longer operating time and service life - Virtually wear-free - Less heat generated - for all drylin® linear modules and axes with NEMA17/23/24/34 hole pattern

Pushing the boundaries of technology. The upper class of brushless DC motors. The high-power 4-pole motors provide maximum performance per unit of volume and weight, and make the buying decision easy with an unsurpassed service life. Ø 30 mm, 200 W. That is top performance. Thanks to the special winding technology and the 4-pole magnets, the maxon EC-4pole drives are unbeatable when it comes to delivering the highest driving power per unit of volume and weight. The motors have no cogging torque, high efficiency, and excellent control dynamics. The metal housing ensures good heat dissipation and mechanical stability. When it comes to service life, these motors also leave the competition far behind. Choose from three motor sizes: Ø 22, 30, 45 mm, short or long 90 – 300 WØ 22 – 32 mm, 90 – 480 W. 4-pole motors for maximum performance per unit of volume and weight guarantee a long service life.

When space is limited. maxon flat motors are well-suited for use when space is at a premium. They offer an attractive combination of high performance and a low price. The brushless flat motors by maxon motor are designed as internal and external rotors and can reach speeds of up to 20,000 rpm. Thanks to the simple design, it was possible to largely automate the manufacturing - this is reflected by the economical price. Choose from EC flat motors with hall sensors, sensorless motors, or EC motors with integrated electronics. These motors can also be combined with gearheads and encoders. Ø 9.2 – 90 mm 0.2 – 90 WØ 9.2 – 90 mm, 0.2 – 90 W. High performance flat motors available with Hall sensors and integrated electronics.

No sacrifice in service life. maxon EC-max is the economical EC line. Thanks to the brushless design, the drives are well-suited for long periods of operation. The maxon EC-max drive is a further development of the principle behind the A-max and RE-max programs. The automated manufacturing ensures that the costs are kept low. Yet you can still tailor the products to your own needs: maxon EC-max stands for an optimal price/performance ratio, with all of the advantages offered by a brushless DC motor. Choose from four motor sizes: Ø 16, 22, 30, 40 mm 5 – 120 WØ 16 – 40 mm, 5 – 120 W. Brushless design for long periods of operation with an excellent price/performance ratio.

From 0 to 100,000 in 5 milliseconds. maxon brushless DC motors are characterized by split-second acceleration and an unrivaled life span. The electrically commutated (DC) maxon brushless DC motors are longer-lasting than their counterparts in the DC range. The long life span offered by the brushless design can be exploited particularly well using preloaded ball bearings. The brushless DC motors have excellent torque characteristics, high power, and a wide speed range of up to 100,000 rpm. The outstanding controllability of the motors enables high-precision positioning tasks. Ø 4 – 90 mm 1.2 – 400 WØ 4 – 90 mm, 1.2 – 400 W. Good torque characteristics, high power, wide speed range and a long life span.

The EPOS2 24/2 EC is a modular digital positioning controller. Matched with brushless EC motors with Hall sensors and encoder up to 48 watts.

The ESCON Module 24/2 is a small-sized, powerful 4-quadrant PWM OEM servo controller for the highly efficient control of permanent magnet-activated brushed DC motors and brushless EC motors up to approximately 48 Watts.

The EPOS2 24/2 DC/EC is a modular digital positioning controller. Matched with brushed DC motors with encoder or brushless EC motors with Hall sensors and encoder up to 48 watts.

The EPOS2 70/10 is a modular digital positioning controller. Matched with brushed DC motors with encoder or brushless EC motors with Hall sensors and encoder, from 80 to 700 watts.

The EPOS2 Module 36/2 is an OEM positioning controller plug-in module for brushed DC motors with encoder or brushless EC motors with Hall sensors and encoder up to 72 watts.

The EPOS2 50/5 is a modular digital positioning controller. Matched with brushed DC motors with encoder or brushless EC motors with Hall sensors and encoder, from 5 to 250 watts.

The EPOS2 24/5 is a modular digital positioning controller. Matched with brushed DC motors with encoder or brushless EC motors with Hall sensors and encoder, from 5 to 120 watts.

The brushless EC motors with an ironless winding have an extremely large speed range, high power, excellent control characteristics and of course unrivaled durability. The EC 4 is available in 2 lengths, either with Hall sensors or sensorless. Combine with planetary gearhead GP 4C for high torques. Order your EC drive online now.

The brushless EC motors with an ironless winding have an extremely large speed range, high power, excellent control characteristics and of course unrivaled durability. The EC 4 is available in 2 lengths, either with Hall sensors or sensorless. Combine with planetary gearhead GP 4C for high torques. Order your EC drive online now.

The brushless EC motors with an ironless winding have an extremely large speed range, high power, excellent control characteristics and of course unrivaled durability. The EC 4 is available in 2 lengths, either with Hall sensors or sensorless. Combine with planetary gearhead GP 4C for high torques. Order your EC drive online now.

The EPOS2 P 24/5 is a freely programmable positioning controller according IEC 61131-3. Matched with brushed DC motors with encoder or brushless EC motors with Hall sensors and encoder, from 5 to 120 watts.

The brushless EC motors with an ironless winding have an extremely large speed range, high power, excellent control characteristics and of course unrivaled durability. The EC 4 is available in 2 lengths, either with Hall sensors or sensorless. Combine with planetary gearhead GP 4C for high torques. Order your EC drive online now.

The brushless EC motors with an ironless winding have an extremely large speed range, high power, excellent control characteristics and of course unrivaled durability. The EC 4 is available in 2 lengths, either with Hall sensors or sensorless. Combine with planetary gearhead GP 4C for high torques. Order your EC drive online now.

The brushless EC motors with an ironless winding have an extremely large speed range, high power, excellent control characteristics and of course unrivaled durability. The EC 4 is available in 2 lengths, either with Hall sensors or sensorless. Combine with planetary gearhead GP 4C for high torques. Order your EC drive online now.

Staying in control has never been easier. Intelligent dc motor control electronics. All current, speed and position controllers are specially designed for brushed DC and brushless DC motors up to 700 W. CANopen or EtherCAT allow for easy integration of your network. The ESCON 4-Q servo controllers provide power and highly precise speed control for maxon brushed DC and brushless DC (maxon EC) motors , in a compact design. For simple speed control applications of brushless DC motors, we offer 1-Q servo amplifiers with a modular design available. All amplifiers feature a variety of useful additional functions. When more than just speed and torque control is required and recurring positioning processes with complex trajectories have to be executed use maxon positioning controllers. With the EPOS2 and EPOS3 (Easy Positioning System) controllers, a modular product line is available for DC brushed and brushless motors. The newest addition to the high-performance range of positioning controllers are the MAXPOS controllers. Current and speed controllers: DEC Module: 1-quadrant brushless DC (maxon EC) motor amplifier for speed control ESCON: 4-quadrant servo controller for current and speed control Positioning controllers: EPOS2: Easy Positioning System with CANopen interface and Interpolated Position Mode EPOS2 P: The programmable positioning controller with CANopen interface EPOS3: Easy Positioning System with EtherCAT interface and CoE (CAN application layer over EtherCAT) MAXPOS: High-performance positioning controller with EtherCAT interface and CoE (CAN application layer over EtherCAT)Cost-effective, Easy speed-control with Hall sensors up to 250 W.

ESCON The user-friendly servo controller program by maxon motor. The ESCON servo controllers are small, powerful 4-quadrant PWM servo controllers for the highly efficient control of permanent magnet-activated DC brushed and brushless motors. The featured operating modes – speed control (closed loop), speed control (open loop), and current control – meet the highest requirements. The ESCON servo controllers are designed to be commanded by an analogue set value. They have a wide range of functionalities with digital and analogue inputs and outputs and are configured over the USB interface using the graphic user interface "ESCON Studio" for Windows PCs. Compare ESCON models. ESCON Feature Chart See the Feature Chart for a quick overview of the entire ESCON range of products and to compare the different models. ESCON Setup (complete version) Installation includes: ESCON Studio 2.2 (graphical user interface) ESCON firmware 0x0150 Documentation (ESCON Feature Chart, ESCON Setup «Release Notes», Firmware Version «Readme», Hardware Reference)Compact, powerful 4-quadrant PMW servo controllers with analog command signals. Easy to configure.

MAXPOS The high-performance positioning motor controller by maxon motor. MAXPOS 50/5 receives movement and I/O commands from a superior EtherCAT master, which carries out the process control. The extremely fast controllers and the diverse feedback options available provide the ideal conditions for the operation of permanent-magnet activated brushed and brushless DC motors in high-performance applications. Raising the bar for precision and synchronisation. MAXPOS 50/5 supports CoE (CAN application layer over EtherCAT). MAXPOS features The Feature Chart provides a quick overview of the most important features: MAXPOS integration MAXPOS Communication Guide provides hints for integration of MAXPOS into several EtherCAT master systems and further application support topics: MAXPOS 50/5 Part number 447293 For brushed DC motors with encoders and brushless DC (maxon EC) motors with Hall sensors and encoders up to 250 W. MAXPOS Setup (complete version) Installation includes: MAXPOS Studio 1.3 (graphical user interface) MAXPOS firmware 0x0121 Documentation (MAXPOS Feature Chart, MAXPOS Setup «Release Notes», Firmware Version of «Readme», Hardware Reference, MAXPOS Application Notes Collection, Firmware Specification, and Application Notes)EtherCAT interface, fast controllers, and diverse feedback options for the operation of brushed DC or brushless DC (maxon EC) motors.

EPOS Positioning made easy. EPOS is a modular, digital positioning controller by maxon motor. It is ideal for permanent-magnet activated brushed DC and brushless DC motors with incremental encoders and an operating range of 1 to 700 W. The wide range of operating modes combined with various command interfaces allow for versatile use in a wide range of drive systems in the fields of automation and mechatronics. EPOS2 See the «Feature Chart» for a quick overview of the entire EPOS2 product range and to compare the different models. EPOS3 EPOS2, EPOS2 P, EPOS3 and MCD Setup (complete version) The installation includes: EPOS Studio 2.1 (graphical user interface) EPOS2 firmware 0x2126 EPOS2 P firmware 0x0205 EPOS3 firmware 0x2211 Open PCS2008 programming environment for EPOS P Documentation (Feature Chart, Release Notes, Getting Started, Cable Starting Set, Hardware Reference, Communication Guide, Firmware Specification, Programming Reference, Supervisory Control Reference, and Application Notes)EPOS (Easy Positioning System) with CANopen or EtherCAT interface and Interpolated Position Mode.

Pure water jet cutting machine MDE range allows VHP pure waterjet cutting. Available with different pumps and options, it is designed mainly for tissu and leather industries. Structure : - frame single block in welded steel - mobile gantry in welded steel - stainless steel tank - plastic or aluminum honeycomb coating - 3-turn rotary table for cutting / loading and simultaneous nesting / unloading (MDE-R only) Kinematics : - guidance by stainless steel precision linear rails with preloaded ball slides - XYZ transmission by pre-loaded ball screws (double X-axis motorization) - motorization by AC brushless motors - rotative table with cross-roller crown (MDE-R only) Numerical control : - Numerical control MECANUMERIC CN7000 ISO with 40 Gb hard disk - MHI on control desk with a 15-inch touch screen - Data input by Ethernet link, USB port Features : TYPE MDE MDE-R X-axis travel in mm 1005 1050 Y-axis travel in mm 755 750 Z-axis travel in mm 75 50 Max. speed in mm/sec 30...

Designed for fine, precise, intensive works in small formats, the CharlyDMCII milling machines are used for many applications: metal engraving, fine machining, plasturgy, design, rapid prototyping, electronics… STRENGTHS • Rigid steel/cast aluminium structure. • Double guide grinded steel prismatic rails and preloaded ball beatings. • Transmission by ball screws. • Fixed table / mobile gantry kinematics • Available in servo-brushless motorization. • Economical version with step by step motorization. • Design and ergonomy. • Small footprint. • Available with automatic tool change. • Very high frequency spindle for machining and fine works. • Parts held by vacuum table (option). • ISO programming, industry standard. • Machining of soft materials and metals. • Quality and industrial performances of Charlyrobot machines. • Compliant with European safety directive Machine 2006/42/CE. Models DMCII 301/303 DMCII 601/603 DMCII 6121/6123 X stroke 310 mm 610 mm 610 mm Y stroke (without...

The rigour and the accuracy for the industrial works, the polyvalence and the simplicity for a maximum of profitability. Designed for the accurate and intensive works, they allow a wide field of applications : metal engraving, fine millings, design, prototyping Refer to the exemples of applications : Moulds and models Health case or box Side windows Aircraft interior furnishing Jewels engraving Masks Household appliances Lights Furniture Aluminium frames The strengths • XYZ stroke 310 x 430 x 120 mm (DMC300) - "Y" reduced to 250 mm in case of automatic tool changer.
 • XYZ stroke 600 x 610 x 120 mm (DMC600) - "Y" reduced to 420 mm in case of automatic tool changer. • Rigid structure made of steel / Aluminium foundry.
 • Double guiding by prismatic rails in grinded steel with re-circulating ball bearings.
 • Ball screw with pre-stressed sockets. • Cinematics fixed table / mobile gantry.
 • Available in « servo-brushless » motorization.
 • Economical version with stepper...