Belt system - Import export

The tension meter is used to perform a pretension test on commercially available belt systems quickly and easily by means of frequency measurement. Fully electronic and equipped with stateoftheart microprocessor technology, the meter enables precise adjustment of all V, toothed and flat belts that have to be tensioned in the range from 10 to 600 Hz. The measurement must never be performed while the drive is running The meter is not permitted or certified for use in potentially explosive areas.

Assembly line for micro gas generator (belt tensioner) Workpiece carrier transfer system (above/below level) with multiple automation stations

Gemex is a hydraulically adjustable and mechanically lockable motor platform, which allows technicians to check and, if necessary, to adjust the belt‘s tension in the easiest and most efficient way. In 2 minutes your belts are replaced, no realignment is needed. It will reduce your maintenance & energy costs and increase the life cycle of your equipment. Gemex Belt Tensioning System Benefits The Gemex hydraulic belt tensioning system is designed to be compatible with all designs and types of existing belt tensioning systems. The Gemex system is easy to use and comes with many benefits: Energy Savings 5 to 10% energy savings ROI of ±1 year Ease of Maintenance Improved safety for maintenance operators Belts can be adjusted during production Belt replacement within 2 minutes No alignment required Easy access and maintenance No special education necessary, everybody can use Gemex Available for all applications Installation possible on every existing frame All types of...

It allows technicians to check and, if necessary, to adjust the belt‘s tension in the easiest and most efficient way. In 2 minutes your belts are replaced, no realignment is needed. It will reduce your maintenance & energy costs and increase the life cycle of your equipment. Gemex Belt Tensioning System Benefits The Gemex hydraulic belt tensioning system is designed to be compatible with all designs and types of existing belt tensioning systems. The Gemex system is easy to use and comes with many benefits: Energy Savings 5 to 10% energy savings ROI of ±1 year Ease of Maintenance Improved safety for maintenance operators Belts can be adjusted during production Belt replacement within 2 minutes No alignment required Easy access and maintenance No special education necessary, everybody can use Gemex Available for all applications Installation possible on every existing frame All types of belts Horizontal / vertical All industries that use belt applications

SELECTIO Selective soldering systems for automatic single point soldering and multiple point soldering It is not always possible to use mass soldering processes such as wave soldering to perform a certain soldering task. Individual soldering steps are often necessary. To automate this process and to lower the costs while maintaining the high quality requirements, STRECKFUSS SYSTEMS has developed the selective soldering system SELECTIO. Just like our wave soldering system TITANIUM, SELECTIO too is equipped with the corrosion and tin resistant agent titanium and therefore works perfectly for lead free soldering. Product characteristics – an overview: x/y/z- axes system with precision toothed drive belt transport system and assembly carrier standard stand- alone- system (offline system): optional transportation belt connection as inline system printed circuit board transportation with assembly carrier soldering processes: single point nozzle and surface nozzle as well as dip soldering via mask technique fluxing out of vendor's flux container with multi- drop- fluxer nozzle short wave IR- quartz- radiators for preheating of printed circuit boards pyrometer for contact- free temperature check of printed circuit boards easily exchangeable soldering nozzles Microsoft© Windows user surface and process visualization: - BDE for documentation complying with DIN ISO 9000 ff - management data organization - optional real- time video surveillance

Hoods for Conveyor Belt Systems The versatility and robustness of conveyor hoods has made them into a standard feature in the protection of conveyor systems and the environment. Conventional standard hoods for conveyor widths from 650 mm to up to 1,200 mm are permanently in stock. If you are looking for a suitable protection for your conveyor and the materials it transports at an attractive price we can provide you with solutions. Our hoods are available as galvanized steel sheet hoods or in GRP. Contact us for more information.

germanLine® Red 35 Applications: germanLine® Red 35 is particularly resistant to fine-grain, sharp-edged slurries such as wet gravel. It also is extremely resistant to wet wear and round-grain goods. germanLine® Red 35 wear protection rubber is an excellent sound absorber and reduces noise emission. It is mainly used as shock absorber and protection against corrosion and caking in bunkers, skids or slides, pumps, skirts, chutes, silos etc. Available dimensions: Thickness: 3 / 5 / 6 / 8 / 10 / 12 / 15 / 20 mm Width: 1,500 / 2,000 mm Available length: 10 / 20 m Specifications: Colour: red Hardness: 35 ± 5 ° Shore A Tensile strength: ≥ 19 MPa Elongation at break: ≥ 650 % Abrasion: ≤ 65 mm³ at 5 N Downloads: Technical Data Sheet germanLine® Red 35 - English [PDF]

germanLine® Black 60 Applications: germanLine® Black 60 is mainly used when wear resistance has to be extremely high, i.e. when dealing with rough abrasive material and great heights of drop. germanLine® Black 60 shows excellent tear and tensile strengths. Available dimensions: Thickness: 5 / 8 / 10 / 12 / 15 / 20 mm Width: 1,500 / 2,000 mm Available length: 10 / 20 m Specifications: Colour: black Hardness: 60 ± 5 ° Shore A Tensile strength: ≥ 17 MPa Elongation at breaj: ≥ 400 % Abrasion: ≤ 130 mm³ at 10 N Downloads: Technical Data Sheet germanLine® Black 60 - English [PDF]

germanLine® Beige 35 with CN Layer Applications: germanLine® Beige 35 with CN layer protects surfaces against wet wear and round grain as well as fine-grained, sharp or hard conveyor goods or slurries, such as wet grit. Our product is used in granulation drums, bunkers, skids or slides, pumps, skirts, chutes, silos etc. and serves as wear protection, shock absorber, sound insulation, protection against corrosion and caking. Available dimensions: Thickness: 4 / 6 / 8 / 10 / 12 / 15 / 20 mm Width: 1,500 / 2,000 mm Available length: 10 / 20 m Specifications: Colour: beige Density: 1.0 ± 0.03 g/cm³ Hardness: 35 ± 5 ° Shore A Tensile strength: ≥ 19 MPa Elongation at break: ≥ 650 % Abrasion: ≤ 95 mm³ at 5 N Breaking force: ≥ 50 N/mm Downloads: Technical Data Sheet germanLine® Beige 35 with CN Layer - Englisch [PDF]

germanLine® Black 60 mit CN-Schicht Applications: Standard quality with extremely high performance in wear resistance. For rough abrasive material and great heights of drop. germanLine® Black 60 shows excellent tear and tensile strengths. Available dimensions: Thickness: 4 / 6 / 8 / 10 / 12 / 15 / 20 mm Width: 1,500 / 2,000 mm Available length: 10 / 20 m Specifications: Colour: black Density: 1.10 ± 0.03 g/cm³ Hardness: 60 ± 5 ° Shore A Tensile strength: ≥ 20 MPa Elongation at break: ≥ 450 % Abrasion: ≤ 90 mm³ at 10 N Breaking force: ≥ 80 N/mm Downloads: Technical Data Sheet germanLine® Black 60 with CN Layer - English [PDF]

germanLine® Black 60 mit CN-Schicht Applications: Standard quality with extremely high performance in wear resistance. For rough abrasive material and great heights of drop. germanLine® Black 60 shows excellent tear and tensile strengths. Available dimensions: Thickness: 4 / 6 / 8 / 10 / 12 / 15 / 20 mm Width: 1,500 / 2,000 mm Available length: 10 / 20 m Specifications: Colour: black Density: 1.10 ± 0.03 g/cm³ Hardness: 60 ± 5 ° Shore A Tensile strength: ≥ 20 MPa Elongation at break: ≥ 450 % Abrasion: ≤ 90 mm³ at 10 N Breaking force: ≥ 80 N/mm Downloads: Technical Data Sheet germanLine® Black 60 with CN Layer - English [PDF]

germanLine® Red 40 with CN Layer Applications: germanLine® Red 40 is suitable for extremely challenging conditions and has excellent wear resistance and sturdiness when it comes to sharp-edged grain. It can be used universally in dry and wet conditions - as pad, shock absorber and protection against caking. Available dimensions: Thickness: 4 / 6 / 8 / 10 / 12 / 15 / 20 mm Width: 1,500 / 2,000 mm Available length: 10 / 20 m Specifications: Colour: red Density: 1.08 ± 0.03 g/cm³ Hardness: 40 ± 5 ° Shore A Tensile strength: ≥ 17 MPa Elongation at break: ≥ 650 % Abrasion: ≤ 85 mm³ at 5 N Breaking force: ≥ 60 N/mm Downloads: Technical Data Sheet germanLine® Red 40 with CN Layer - English [PDF]