Automatic valve - Import export

Using highly advanced gas filling Small and Medium Enterprises technology is no longer a privilege for large enterprises. Over the last 15 years Filltech developed, in its own research center in the heart of Germany, different standard filling solutions. Through this experience, Filltech has now developed UniFill Complete; a standard gas filling solution for small and medium enterprises, using highly advanced technology. UniFill Complete is a ready-to-use, standardized CO 2 und N 2O gas filling station with a wide filling range for cylinders between 4 and 50 kg. Highlights Easy, precise and safe operation Entry-level, low-cost solution Automatic filling process with bypass valve Pumping set included Integrated pump control Legal for trade

SCHÜTZE spray valve GF / 1 + GF / 2 These spray valves are robust apparatuses for application of colours, paints. Also suitable for spraying release agents and glues. nozzle and needle: stainless steel available nozzle dimensions: 0,5; 0,8; 1,0; 1,2; 1,5; 1,8; 2,0; 2,5; 3,0; 3,5 mm ø. flatspray or roundspray pattern

SCHÜTZE spray valve KA 2 - NA Details as for KA 2 Additional equipped with a proximity switch for control of needle (open/close). nozzle and needle : stainless steel available nozzle dimensions: 0,2; 0,3; 0,5; 0,8; 1,0; 1,2; 1,5mm Ø

SCHÜTZE spray valve KA 2/Airless The automatic spray valve KA 2/Airless is an airless spray valve. The fluid will be squeezed through the spray valve and thereby atomized. Because of it´s low weight and the small measurements the KA 2/Airless is ideal for all applications with low space requirements. needle seat and needle: stainless steel

SCHÜTZE AIRLESS-spray valve S 830 Spray valve without atomizing air. Connections of valve on under-side. Control of S 830 via external pneumatic valves. Max. material pressure: 250 bar All standard airless nozzles can be fitted to the S 830. needle seat and needle : tungsten carbide

SCHÜTZE extrusion valve MVV The mini extrusion valves of series MVV are designed for the application of oils, release agents and other thin liquids. The application can be done punctiform or linear. nozzle + needle: stainless steel available nozzle dimensions: 0,2/0,3/0,4/0,5/0,6/0,8 mm Ø

SCHÜTZE Extrusionsventil MMKD 50 Very fast and exact valve for continuous or intermittend application of glues, adhesives and oils. Available with long nozzle (LV) and short nozzle (KV). The extreme short control air distances and the high speed solenoid gives this valve very fast and exact needle intermission cycles up to 200 cycles per second. nozzle: stainless steel needle: tungsten carbide available nozzle dimensions: 0,2; 0,3; 0,4; 0,5; 0,6; 0,8; 1,0; 1,2; 1,5; 2,0; 2,5 mm ø

SCHÜTZE extrusion valve MMDV/MV (LV/KV) Small design. Suitable for application of glues, adhesives and oils. Available with long nozzle (LV) and short nozzle (KV). nozzle: stainless steel needle: tungsten carbide available nozzle dimensions: 0,2; 0,3; 0,4; 0,5; 0,6; 0,8; 1,0; 1,2; 1,5; 2,0; 2,5 mm ø

SCHÜTZE extrusion valve MMKD 30 Very fast and exact valve for continuous or intermittend application of glues, adhesives and oils. Available with long nozzle (LV) and short nozzle (KV) nozzle: stainless steel needle: tungsten carbide available nozzle dimensions: 0,2; 0,3; 0,4; 0,5; 0,6; 0,8; 1,0; 1,2; 1,5; 2,0; 2,5 mm ø

SCHÜTZE extrusion valve MMDD LV Small design. Suitable for application of glues, adhesives and oils. Available with long nozzle (LV) and short nozzle (KV) nozzle : stainless steel needle : tungsten carbide available nozzle dimensions : 0,2; 0,3; 0,4; 0,5; 0,6; 0,8; 1,0; 1,2; 1,5; 2,0; 2,5 mm ø

SCHÜTZE extrusion valve MMDV and MMDV LV/KV Small design. Suitable for application of glues, adhesives and oils. Available with long nozzle (LV) and short nozzle (KV) nozzle: stainless steel needle: tungsten carbide available nozzle dimensions: 0,2; 0,3; 0,4; 0,5; 0,6; 0,8; 1,0; 1,2; 1,5; 2,0; 2,5 mm ø

SCHÜTZE spray valve GF / 5 with quick release adapter Designed for spraying colours, paints etc. Spray angle can be regulated individually by separate air connection from round- to flatspray without changing the aircap. nozzle and needle: stainless steel available nozzle dimensions: 0,3; 0,5; 0,8; 1,0; 1,2; 1,4; 1,5; 1,7; 2,0; 2,5; 3,0; 3,5 mm ø Also available in HVLP-technique

SCHÜTZE spray valve GF / 4 Designed for spraying colours, paints etc. Spray angle can be regulated individually by separate air connection from round- to flatspray without changing the aircap. nozzle and needle: stainless steel available nnozzle dimensions: 0,3; 0,5; 0,8; 1,0; 1,2; 1,4; 1,5; 1,7; 2,0; 2,5; 3,0; 3,5 mm Ø Also available in HVLP-technique

SCHÜTZE spray valve GF / 3 Designed for spraying colours, paints etc. With integrated atomizing air valve for regulation of purging air. Spray angle can be regulated individually from round- to flatspray without changing the aircap. nozzle and needle: stainless steel available nozzle dimensions: 0,3; 0,5; 0,8; 1,0; 1,2; 1,5; 1,7; 2,0; 2,5; 3,0; 3,5 mm ø Also available in HVLP-technique

SCHÜTZE spray valve MKD-IS R/F The spray valves are electro-pneumatically controlled spray valves. They are suitable for spraying release agents, oils, colours and in version KLS also for glues and adhesives. The specific features are the regulation for atomizing air, separate for cone and middle holes and the integrated control valve for pre- and purging air. nozzle and needle: stainless steel available nozzle dimensions: 0,2; 0,3; 0,5; 0,8; 1,0; 1,2; 1,5 mm ø

SCHÜTZE MINI-spray valve MSV with quick release adapter The special of the series MSV with quick release adapter is the possibility to change the spray valve within seconds without disconnecting or dismantling the hoses for air and fluid. Interruptions of work are reduced to a minimum.

SCHÜTZE spray valve KA 2 PEEK The automatic spray valve KA 2, made from PEEK, has a weight of 35 gram! only. Also fluids, which may react with metallic materials, could sprayed with this valve made from PEEK.

SCHÜTZE spray valve KA 2 with quick release adapter The special of the series KA 2 with quick release adapter is the possibility to change the spray valve within seconds without disconnecting or dismantling the hoses for air and fluid. Interruptions of work are reduced to a minimum.

SCHÜTZE spray valve ASV with quick release adapter The special of the series ASV with quick release adapter is the possibility to change the spray valve within seconds without disconnecting or dismantling the hoses for air and fluid. Interruptions of work are reduced to a minimum.

SCHÜTZE spray valve KA 2 needle controlled spray valve in small design. Suitable for thin liquids as f.i. release agents and oils. nozzle and needle: stainless steel available nozzle dimensions: 0,2; 0,3; 0,5; 0,8; 1,0; 1,2; 1,5 mm ø flatspray or roundspray pattern depending on aircap

SCHÜTZE spray valve ASV pneumatically controlled spray valve. Suitable for spraying release agents, oils, colours, etc... .Spray angle can be regulated individually from round- to flatspray without changing the aircap. nozzle and needle: stainless steel available nozzle dimensions: 0,2; 0,3; 0,5; 0,8; 1,0; 1,2; 1,5; 2,0; 2,5 mm ø

SCHÜTZE spray valve MMFS pneumatically controlled roundspray valve. Designed for spraying signature- and marking colours. Very fine and small sprayjet. nozzle and needle: stainless steel available nozzle dimensions: 0,3; 0,5; 0,8; 1,0; 1,2; 2,0 mm ø roundspray aircap

SCHÜTZE spray valve MFS pneumatically controlled spray valve. Suitable for spraying release agents, oils, colours, etc... . Also in version MFS/KLS available. nozzle and needle: stainless steel available nozzle dimensions: 0,2; 0,3; 0,5; 0,8; 1,0; 1,2; 1,5; 2,0; 2,5 mm ø flatspray or roundspray pattern depending on aircap

SCHÜTZE spray valve MKD-IS R/F The spray valves are electro-pneumatically controlled spray valves. They are suitable for spraying release agents, oils, colours and in version KLS also for glues and adhesives. The specific features are the regulation for atomizing air, separate for cone and middle holes and the integrated control valve for pre- and purging air. nozzle and needle: stainless steel available nozzle dimensions: 0,2; 0,3; 0,5; 0,8; 1,0; 1,2; 1,5 mm ø

Outdoor cooling made easy EN - These series of household high pressure pumps are the suitable solution with high quality and safety standard for all requirements to build professional misting systems with flow rates ranging from 0.5 up to 0.9 l/minwith single phase electric motor. High quality components like ceramic pistons, aluminum head, long lasting professional seals, assure smooth operation and a long-lasting reliability. Our built-in digital timer offers full control of the efficiency of the misting system by direct adjustment of the frequency of mist spray increasing the advantages on water and energy consumption with savings up to 70%if compared to standard systems. This pump is suitable for small and medium outdoor cooling systems thanks to the special programming of the built-in timer that allows you to set work and pause cycles in seconds. Its automatic drain solenoid valve allows a perfect drain of the pipeline and assures optimal anti-drip system performances.