Results for
THOMAS CONSTRUCTIONS MECANIQUES - TCM SAS
France
From the design phase of your project, we take care of installing all the electrical and electronic components: electrical studies PLC studies and programming production of electrical diagrams, wiring and installation logbooks wiring of power cabinets, control cabinets (automation), pneumatic cabinets and frames installation of cable trays on-site connection final inspection, power up and validation
Request for a quoteCREISCENDO
France
Supply of electrical equipment on major projects in Africa (Hotels, Datacenters, Malls, Hospitals, LV / MV, lightings etc)
Request for a quoteSIG SERVICIOS INTEGRADOS DE INGENIERÍA
Spain
Thanks to its independence and a team of senior specialist engineers, SiG offers quality simulations and studies, committing itself in terms of time and scope to provide security and solutions to the clients’ problems. SiG provides modeling services for some of the world’s leading manufacturers of inverters and wind turbines, and in collaboration with its partners it provides the necessary services for grid connection and grid compliance studies, such as the Spanish NTS or Australian GPS. By working together with manufacturers and supporting them with their models, our team has an important competitive advantage to simulate and study the behavior of a renewable plant. - Advice in grid compliance - Plant design and sizing - NTS simulation and certification - Capability analysis at interconnection points
Request for a quoteMAGAGER, UNIPESSOAL, LDA
Portugal
# Side aspiration Features: Peripheral electric pump Brass turbine Shaft in stainless steel Maximum suction 8 m Electric motor with built-in thermal protection Maximum fluid temperature 40ºC Maximum ambient temperature 40ºC IPX4.
Request for a quoteMAGAGER, UNIPESSOAL, LDA
Portugal
Features: Peripheral electric pump Brass turbine Shaft in stainless steel Maximum suction 8 m Electric motor with built-in thermal protection Maximum fluid temperature 40ºC Maximum ambient temperature 40ºC IPX4.
Request for a quoteMAGAGER, UNIPESSOAL, LDA
Portugal
Features: Peripheral electric pump Brass turbine Shaft in stainless steel Maximum suction 8 m Electric motor with built-in thermal protection Maximum fluid temperature 40ºC Maximum ambient temperature 40ºC Side aspiration IPX4
Request for a quoteMAGAGER, UNIPESSOAL, LDA
Portugal
# Side aspiration Features: Peripheral electric pump Brass turbine Shaft in stainless steel Maximum suction 8 m Electric motor with built-in thermal protection Maximum fluid temperature 40ºC Maximum ambient temperature 40ºC IPX4.
Request for a quoteMAGAGER, UNIPESSOAL, LDA
Portugal
Features: Peripheral electric pump Maximum suction 8 m Brass turbine Electric motor with built-in thermal protection Maximum fluid temperature 60ºC Maximum ambient temperature 40ºC IP44.
Request for a quoteINTECKER SP. Z O. O.
Poland
We prefabricate electrical cabinets. Our electricians and automatics can support customers in PLC programming, making electrical documentation (eplan) and electrical montage.
Request for a quoteINTECKER SP. Z O. O.
Poland
We provide complete assembly, disassembly and service. Our technicians can install machines and industrial lines in your factory or at your customers' premises." Ease. We have a strong team of mechanics and electricians with experience working in different countries, under different conditions and with different machines. We communicate in English, German and Polish. We have the necessary equipment and tools to perform all tasks. We always come to the project fully equipped and ready for work. We implement the project based on the given documentation, adapting to the customer's specifications. We provide service of the highest quality. We value safety and speed.
Request for a quoteIGUS® GMBH
Germany
chainflex® CF Air pneumatic hoses were tested in e-chains® for over several million bending cycles. Their outstanding features include flexibility, high abrasion resistance and very good resistance to oil and coolants. -For extremely heavy-duty applications -PU/PE hose -Oil- and coolant-resistant -Abrasion-resistant -Outside-toleranced -PVC and halogen-free
Request for a quoteIGUS® GMBH
Germany
chainflex® robot cables are used in energy chains or 3D applications. The twistable robot cables meet extremely high industrial stress requirements and score points with properties such as resistance to hydrolysis and microbes, UV resistance and many, many others. Different types of robot cable are available, e.g. hybrid cables, fibre optic cables (FOCs), motor cables and servo cables. Typical application areas: - For heavy duty applications - Almost unlimited resistance to oil - Indoor and outdoor applications with average solar radiation - Unsupported travel distances and up to 100 m for gliding applications - Machining centres / machine tools, storage and retrieval systems, packaging industry, handling, refrigerating
Request for a quoteIGUS® GMBH
Germany
chainflex® special cables are cables for special applications such as hanging applications, for use in rail vehicles or thermal and compensation cables. Use our comprehensive knowledge about cable plus the experience of 2 billion test cycles that are annually realized in the company-owned chainflex® laboratory. The steadily growing product range of the chainflex® special cables is based on the requirements of our customers. igus® also manufactures cables for special applications and uses a wide range of materials and manufacturing processes. Depending on the design, customer-specific special products can be made from lengths of 500 m. We look forward to hear about your job definition!
Request for a quoteIGUS® GMBH
Germany
-For medium duty use -Minor oil influence -More suitable for indoor applications, but also for outdoor use at temperatures > 5 °C -Unsupported travel distances and up to 20 m for gliding applications -Bus connection cable for machining units/machine tools, handling, indoor cranes
Request for a quoteIGUS® GMBH
Germany
- Requirements: For extremely heavy duty applications - Outer jacket: TPE - Hydrolysis and microbe-resistant - Silicone-free - UV-resistant - Oil resistance: Oil-resistant according to DIN EN 60811-404, resistant to organic oils according to VDMA 24568 with Plantocut 8 S-MB by DEA
Request for a quoteWERNER LANGER GMBH & CO. KG
Germany
The “casing” sector for the electro and electronics industry was developed as a result of demand from the lighting industry for transformer housing for NV lights. Here we can emphasise our housings for electronic mounting devices. Individual customer requirements can be realized cost-efficiently by using insert adapters. Other products for the electrical industry are connectors, strain relief and cable fastening.
Request for a quoteIGUS® GMBH
Germany
Find the suitable motor for your application: simply enter your requirements and receive suitable suggestions.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
IGUS® GMBH
Germany
When combined with the appropriate gearbox, drylin® linear axes with the new BLDC motors achieve higher speed and greater torque. Energy is used more efficiently, as a result of which EC/BLDC motors are more durable and have a longer service life. Due to the fact that carbon brushes are not used, brushless motors are almost completely wear-resistant, generate less heat and enable longer, uninterrupted operation. The EC/BLDC motors have the same connections as NEMA 17/23/24/34 stepper motors. - Brushless motors enable higher speed and greater torque - Longer operating time and service life - Virtually wear-free - Less heat generated - for all drylin® linear modules and axes with NEMA17/23/24/34 hole pattern
Request for a quoteIGUS® GMBH
Germany
Versatile choice due to the high torque and speed. This motor is the best choice for most applications with medium loads. Stepper motors from igus® are a good supplement to drylin® linear axes. They are characterised by their cost-effectiveness, their precision and easy control. They work reliably under the most varied environmental conditions (depending on the selected class of protection IP). The igus® stepper motors can be connected to the most common motor controls using standardised electrical connection. The connector interface provides a high IP65 protection level (IP: International Protection). The higher the IP rating, the better the motor is protected from the ingress of dirt and water. The encoder sends signals from the motor to the motor control. The encoder verifies that the required linear motion has occurred precisely as required. Encoder = increased machine accuracy.
Request for a quoteIGUS® GMBH
Germany
This little motor has impressive torque and high RPMs. Reliable operation with quick movements of low loads. Stepper motors from igus® are a good supplement to drylin® linear axes. They are characterised by their cost-effectiveness, their precision and easy control. They work reliably under the most varied environmental conditions (depending on the selected class of protection IP). The igus® stepper motors can be connected to the most common motor controls using standardised electrical connection. Motors with stranded wires are the least expensive and the most common stepper motors. The connecting wires for this type exit from the housing and will be connected with a JST connector. They are usually installed in machines and equipment that have an additional housing or are used in clean environments.
Request for a quoteIGUS® GMBH
Germany
For designs that require a stepper motor with directly integrated lead screw, drylin® E offers the ideal solution. The stand-alone versions with NEMA11 stepper motor (very small type) are available in a compact type with or without encoder. The lead screw is centred and in combination with the dryspin® high helix thread technology, the system has a long service life. Stepper motors from igus® are a good supplement to drylin® linear axes. They are characterised by their cost-effectiveness, precision and easy control. They work reliably under the most varied environmental conditions (depending on the selected class of protection IP). The igus® stepper motors can be connected to the most common motor controls using standardised electrical connection. The encoder sends signals from the motor to the motor control. The encoder verifies that the required linear motion has occurred precisely as required. Encoder = increased machine accuracy.
Request for a quoteIGUS® GMBH
Germany
Chainflex® CFKOAX coaxial cables are designed for very heavy duty applications and are almost unlimited resistance to oil, also with bio-oils. Because of its UV resistance, the cables can be used for indoor and outdoor applications. - Unsupported and gliding travel distances up to 400 m and more - Storage and retrieval units for high-bay warehouses, machining units/machine tools, quick handling, cleanroom, semiconductor insertion, indoor cranes, low-temperature applications - For extremely heavy duty applications - Outer jacket: TPE - Hydrolysis and microbe-resistant - Silicone-free - UV-resistant - Oil-resistant according to DIN EN 60811-404, resistant to organic oils according to VDMA 24568 with Plantocut 8 S-MB by DEA
Request for a quoteIGUS® GMBH
Germany
Strain relief from igus® is specifically developed for use in e-chains® and dynamic applications. Thecombination of polymer strain relief components and chainflex® cable materials offers maximum holding force and very high service life for the cables. For a wide variety of applications, igus® offers the best solution with respect to cost and benefits; from the CFXL strain relief for long travels in harsh environments, or the new CFU honeycomb strain relief for fast assembly to the CFN chainfix nuggets for simple and inexpensive strain relief. igus® chainfix strain relief components have been successfully used in thousands of applications around the world for years.
Request for a quoteIGUS® GMBH
Germany
readycable® harnessed cables are ready-to-connect cables for use in energy chains®. As manufacturer and harnesser, igus® provides everything from a single source, thus reducing throughput times and the number of suppliers. The portfolio includes an extensive range of catalogue products, including cables harnessed according to manufacturers' standards and diverse industrial standards as well as individual singly or series produced components. Numerous types of cable of different qualities, with different approvals and with different certifications of conformity are available to choose from. All components are subjected to extensive quality checks and functional tests.
Request for a quoteIGUS® GMBH
Germany
Initiator cables, also referred to as sensor/actuator cables, connect control units and different sensors, or, in the case of reversal of the measurement principle, actuators. Frequently used abbreviations include ini or ini cable (plural: inis). Sensor or measurement transducers transform physical quantities such as rotation, speed, distance or length into analogue electric impulses. In the case of an actuator, the measured electric current (symbol: I, unit: ampere; A) or voltage (symbol: U, unit: volt; V) is transformed into temperature, pressure or torque. The connection cable consists of at least three cores with a small cross-section of between 0.14mm² and 0.34mm². In the simplest case, two cores are required for supplying the voltage, while the last core transmits an I/O signal. For sensitive applications, there are shielded versions in addition to the traditional ini cables to avoid EMC disruptions (electromagnetic compatibility).
Request for a quoteIGUS® GMBH
Germany
PMA cable protection systems are used wherever the mechanical protection of electrical lines and cables is needed. Highly flexible cable protection tubes are specifically suited for the additional protection of cable guides in e-chain® systems. Due to the combination of technical knowhow and the strictest international safety guidelines, PMA fulfils the worldwide requirements of industrial markets in application areas like mechanical engineering, automotive construction, fiber optics, solar systems as well as applications in the robot sector with high speeds and millions of alternate bending cycles.
Request for a quoteIGUS® GMBH
Germany
The chainflex® bus cables are available for all well-known industrial bus systems such as Profibus, Interbus, Profinet, Ethernet, CAN-Bus, DeviceNet, ASi or CC link. Depending on the cable family, they can be used for torsion, for severe climatic conditions, for narrow radii, or particularly long travel distances, at high speeds and accelerations. Tested in the igus® laboratory with millions of cycles in e-chains®, they provide guaranteed safety against failure. -Bending radii up to 7,5xd -Jacket materials: PVC, iguPUR, PUR or TPE -For flexing applications -For medium duty applications -For extremely heavy duty applications -For twistable use -For heaviest duty applications in rail vehicles -For increased tensile load -Overall shield Flame retardant
Request for a quoteDUTCH SCRAP RECYCLING B.V.
Netherlands
Dutch Scrap Recycling B.V. Is the leading trader in Iron, Aluminium, copper, plastic, rubber , Paper, copper cathode scraps in the Netherlands and Continues to Be a Family Business With Four Generations Working to Innovate the Recycling Industry.
Request for a quoteNORELEM FRANCE
France
Aluminium. Note: The lifting column is an electrically driven system with fully integrated technology, which is maintenance-free and operated according to the plug & work principle. With a maximum speed of 8 mm/s, up to two lifting columns can be driven synchronously between 355 mm and 500 mm using the control (85300-10-90). Optionally, two controls can be connected together with a connection cable (85300-10-91X1000) so that four lifting columns can be driven synchronously. These lifting columns are suitable for thrust and traction loads. At least one control (85300-10-90) and one hand switch (85300-15-1) are required for commissioning the lifting columns. The mounting plate (85300-930040) enables the lifting column to be easily installed into the customer's application.
Request for a quoteResults for
At electrical - Import exportNumber of results
145 ProductsCountries
Company type
Category