Results for
IGUS® GMBH
Germany
FTA Floating moving end Compensate parallel errors The igus® compensator for gliding applications with E2/000 and small E4.1 energy chains. At moving arms with strong lateral offset the floating moving end provides for a compensation and therefore for a force-free run of the energy chain in the guide trough. This extends the life time of your application. -Small, light and low priced -Compatible with PPDS basic analysis units -The basic ”floating moving end“ can be used with the following chain series: 2500, 2700, 3500, E4.28, E4.32 and E4.42 Max. travel distance:100m Max. acceleration: up zo 50m = 2 m/s 2 | 50-100m = 1 m/s 2
Request for a quoteCIC - KLAUS CZERWONKA
Germany
Control ranges from 30 to 300 bar. In sizes 1/8 - 1/4 - M 10 x 1 - M 12 x 1.5.
Request for a quoteCIC - KLAUS CZERWONKA
Germany
In sizes 1/8 - 1/2 - 3/8 - M 10 x 1 - M 12 - M14 - M22 Switching ranges from 30 - 90 °C
Request for a quoteCIC - KLAUS CZERWONKA
Germany
In sizes 1/8 - 1/4 - M 10 x 1 Static pressure up to 400 bar
Request for a quoteVOXELJET AG
Germany
• Mold measurements up to 4 x 2 x 1 m • Does away with elaborate and expensive mold set-ups • Short throughput time (a few days) • Sand molds correspond 1:1 with CAD model • Structures can be designed in accordance with requirements, without having to watch for draft angles or undercuts • Special sands prevent casting problems • Surface quality can be adjusted through use of different sands • Coarse-grained sands for high gas permeability • Considerable flexibility with changes in geometry, without additional expenses • No storage or maintenance of patterns • Cost savings particularly for complex molds and batch sizes of 1 to several hundred pieces
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
VOXELJET AG
Germany
• Mold measurements up to 4 x 2 x 1 m • Does away with elaborate and expensive mold set-ups • Short throughput time (a few days) • Sand molds correspond 1:1 with CAD model • Structures can be designed in accordance with requirements, without having to watch for draft angles or undercuts • Special sands prevent casting problems • Surface quality can be adjusted through use of different sands • Coarse-grained sands for high gas permeability • Considerable flexibility with changes in geometry, without additional expenses • No storage or maintenance of patterns • Cost savings particularly for complex molds and batch sizes of 1 to several hundred pieces
Request for a quoteVOXELJET AG
Germany
• Mold measurements up to 4 x 2 x 1 m • Does away with elaborate and expensive mold set-ups • Short throughput time (a few days) • Sand molds correspond 1:1 with CAD model • Structures can be designed in accordance with requirements, without having to watch for draft angles or undercuts • Special sands prevent casting problems • Surface quality can be adjusted through use of different sands • Coarse-grained sands for high gas permeability • Considerable flexibility with changes in geometry, without additional expenses • No storage or maintenance of patterns • Cost savings particularly for complex molds and batch sizes of 1 to several hundred pieces
Request for a quoteVOXELJET AG
Germany
• Mold measurements up to 4 x 2 x 1 m • Does away with elaborate and expensive mold set-ups • Short throughput time (a few days) • Sand molds correspond 1:1 with CAD model • Structures can be designed in accordance with requirements, without having to watch for draft angles or undercuts • Special sands prevent casting problems • Surface quality can be adjusted through use of different sands • Coarse-grained sands for high gas permeability • Considerable flexibility with changes in geometry, without additional expenses • No storage or maintenance of patterns • Cost savings particularly for complex molds and batch sizes of 1 to several hundred pieces
Request for a quoteFRAMEX
Spain
1 m flexometer in resistant white ABS, with bamboo insert on the body and transport ring. With wide branding surface and blade with measurements in centimetres and inches. Clip Included Bamboo/ ABS
Request for a quoteESTECHTIC EPS-EPP PROCESSING SOLUTIONS
Turkey
We can supply EPS block molding machines, suitable for various capacities and sizes - from the smallest of 2 x 0.5 x 1 (m) to the biggest of 6 x 1.25 x 1.25 (m). We can also supply the block molding machines with the adjustable side and/or bottom. You can learn more about our products and services by visiting our web site - https://www.estechtic.net/ or you can send your inquiries to fr@estechtic.net.
Request for a quoteWOOD IS GOOD LTD.
Latvia
Diameter 18 - 23 cm Height 18 cm 140 pcs on 1 x 1,20 m pallet. 52 pallets in a container (7280 in a load).
Request for a quoteWOOD IS GOOD LTD.
Latvia
Diameter 24 - 28 cm. Height 19 cm 64 pcs on 1 x 1,20 m pallet. 42 pallets in a container (2688 in a load).
Request for a quoteWOOD IS GOOD LTD.
Latvia
Diameter 29 - 32 cm. Height 19 cm 60 pcs on 1 x 1,20 m pallet. 42 pallets in a container (2520 in a load).
Request for a quoteTRUMER SCHUTZBAUTEN GMBH
Austria
Assembly accessories: - Screw-driver - Threaded rod - Long nut metric - Stock screw - Hexagon nut metric - Steel cable, 1 m long - Cable clamp - Support cramp - Colour-spray - Earthing-cable - Earthing-lug
Request for a quoteMIRANDE GROUP
France
Variety:Beauregard Class 1 Size M/L/XI Flesh color: White and red Package: Top open carton 6.5kg Season: Jan-Mar/ Aug-Dec.
Request for a quoteResults for
1 m - Import exportNumber of results
16 ProductsCompany type