Self-protection - Import export

The transparent and self-adhesive protective tape is suitable for the subsequent protection of markings, including painted floor markings, to protect them from wear and dirt, e.g. during forklift traffic. The surface is slightly structured to reduce the risk of slipping. Its use is therefore useful, among other things, for slippery floor markings to increase slip resistance.

Frame made of aluminium profile bars connected by "Tox" connections - Intumescent gas, smoke and flame tight seal in case of fire - Restraint security - Hidden latches - Screwed GKF gypsum plasterboards - Quick and easy installation The 60-minute ceiling fire dampers are designed for installation in false ceilings for self-contained fire protection, one of the requirements being "combustible load only on the room side" and the fire resistance class being EI 60. They provide effective protection against fire progression from the room into the false ceiling area. The integrated aluminium frame is equipped with a fire stop. The cover of the inspection hatch is fitted with a DF fire protection plate and protected against smoke entry by a versatile all-round seal. The cover is secured on both sides by automatic safety hooking arms. The safety catching arms ensure that the lid is intercepted every time the hatch is opened. The lid is easy to remove and replace.

Frame made of aluminium profile bars connected by "Tox" connections - All-round EPDM lip seal - Restraint security - Hidden latches - Screwed GKF gypsum plasterboards Tested for fire resistance from underneath (room side) NF EN 1634-1 : +A1 : 2018 Fire dampers EI 30 are designed to be installed in false ceilings for self-contained fire protection, one of the requirements being "combustible load only on the room side" and the fire resistance class being EI 30. They provide effective protection against the progression of fire from the room into the false ceiling area. The integrated aluminium frame is equipped with a fire stop. The cover of the inspection hatch is fitted with a DF fire protection plate and protected against smoke entry by a versatile all-round seal. The cover is secured on both sides by automatic safety hooking arms.

Frame made of aluminium profile bars connected by "Tox" connections - All-round EPDM lip seal - Restraint security - Hidden latches - Screwed GKF gypsum plasterboard Tested for fire resistance from underneath (room side) NF EN 1634-1: +A1: 2018EN 1634-1: +A1: 2018 Fire dampers EI 60 are designed to be installed in false ceilings for self-contained fire protection, one of the requirements being "combustible load only on the room side" and the fire resistance class being EI 60. They provide effective protection against the progression of fire from the room into the false ceiling area. The integrated aluminium frame is equipped with a fire stop. The cover of the inspection hatch is fitted with a DF fire protection plate and protected against smoke entry by a versatile all-round seal. The cover is secured on both sides by automatic safety hooking arms.

Frame made of aluminium profile bars connected by "Tox" connections - All-round EPDM lip seal - Restraint security - Hidden latches - Screwed GKF gypsum plasterboards Tested for fire resistance from underneath (room side) NF EN 1634-1 : +A1 : 2018 Fire dampers EI 90 are designed to be installed in false ceilings for self-contained fire protection, one of the requirements being "combustible load only on the room side" and the fire resistance class being EI 90. They provide effective protection against the progression of fire from the room into the false ceiling area. The integrated aluminium frame is equipped with a fire stop. The cover of the inspection hatch is fitted with a DF fire protection plate and protected against smoke entry by a versatile all-round seal. The cover is secured on both sides by automatic safety hooking arms.

Frame made of aluminium profile bars connected by "Tox" connections - All-round EPDM lip seal - Restraint security - Hidden latches - Screwed GKF gypsum plasterboards Tested for fire resistance from underneath (room side) NF EN 1634-1: +A1: 2018 Fire dampers EI 120 are designed to be installed in false ceilings for self-contained fire protection, one of the requirements being "combustible load only on the room side" and the fire resistance class being EI 120. They provide effective protection against the progression of fire from the room into the false ceiling area. The integrated aluminium frame is equipped with a fire stop. The cover of the inspection hatch is fitted with a DF fire protection plate and protected against smoke entry by a versatile all-round seal. The cover is secured on both sides by automatic safety hooking arms.

Self-adhesive keel strips as keel protection strip with the extra strong adhesive for the boat skin for kayaks, canoes, inflatable boats, jet skis and folding boats. Roll in 33 m length, in widths of 5 cm, 7.5 cm and 10 cm. Simply peel off the film, press on and you're done.

Self extinguishing PVS protective covering giving protection against corrosion and abrasion for all type of hoses.

For individual warehouse labelling Quick and easy to assemble With magnetic stripe or self-adhesive tape Full-surface protection of documents Very long life time

The effective protection against self loosening and unscrewing. The "NSK" LOCK WASHER is the improved design of the "SK" LOCK WASHER. It also prevents self-loosening of screwed joints and damage to the bearing surfaces and consequent variations in the tightening torques, as they occur in threadlockers with teeth are avoided with lock washers through the special geometrical shape of the locking edges even better than the proven "SK" LOCK WASHER.

FLUX air-operated diaphragm pumps are self-priming and protected against dry running. The pumps are distinguished for their versatility and can be used for virtually all types of media. Available in heavy duty (RFM) or injection-moulded/cast (FDM) version for a huge diversity of applications they are designed for high pressures of up to 8 bars and in addition to other properties they are outstanding for their ease of handling. The 100 % start-up guarantee in every shut-down position guarantees reliability and safe operation. The flow is infinitely variable via the air pressure. In addition the flow rate is easy to calculate. As a result of the integrated silencer the compressed air-operated diaphragm pumps are low noise. In addition the pumps are low-maintenance, in particular if used for pure media.

FFP2 Face Mask in white or black: Made in Germany in top quality. Features of the FFP2 mask Reliable self and respiratory protection (!) German origin "MADE IN GERMANY", production in Germany with materials from Germany Enormous filter performance, over >98 % according to test criteria of EN149:2001+A1:2009 Optimal breathing comfort - low breathing resistance, no shortness of breath, no difficult inhalation or exhalation Meets the requirements of the Personal Protective Equipment Regulation (EU) No. 2016/425 CE certified according to EU standard EN149-2001+A1:2009 Shelf life is 3 years from production date Free of harmful substances and glass fibres,

The effective protection against self loosening and unscrewing. The "SK" Serrated Locking Washer prevents self-loosening of screwed joints. Damage to the bearing surfaces and consequent variations in the tightening torques, as they occur in threadlockers with teeth are avoided with lock washers through the special geometrical shape of the locking edges. shape S (small) shape M (middle) shape B (wide) shape Z (for screws with cylindrical head shape) shape K (for electrical contacts)

Find out more of our corner, edge, pipe and surface protection.

Self-adhesive, flexible edge protection profile made of PU-foam. Marks and protects danger spots. • Self-adhesive, flexible edge protection profile made of polyurethane foam • For indoor use only • Ideal for securing shelves, sharp edges, T-beams etc. in manufacturing, shipping areas and warehousing, basements, stairwells and garages. • Marks danger spots, mitigates impact injuries and prevents damage to vehicles and transport trolleys. • Profiles can be shortened to the desired length with a sharp cutter knife • Colour according to ASR A1.3 similar to RAL 1004/9003 (signal yellow/signal black) • Fire test according to DIN EN 13501-1 class E • Temperature resistant from -30°C - + 70°C • Profile length: 1 m • Width cut-out: 8 mm

Self-adhesive, flexible edge protection profile made of PU-foam. Marks and protects danger spots. • Self-adhesive, flexible edge protection profile made of polyurethane foam • For indoor use only • Ideal for securing shelves, sharp edges, T-beams etc. in manufacturing, shipping areas and warehousing, basements, stairwells and garages. • Marks danger spots, mitigates impact injuries and prevents damage to vehicles and transport trolleys. • Profiles can be shortened to the desired length with a sharp cutter knife • Colour according to ASR A1.3 similar to RAL 1004/9003 (signal yellow/signal black) • Fire test according to DIN EN 13501-1 class E • Temperature resistant from -30°C - + 70°C • Profile length: 1 m • Width cut-out: 8 mm

Self-adhesive, flexible pipe protection profile made of PU-foam. Marks and protects danger spots. • Self-adhesive, flexible pipe protection profile made of polyurethane foam. • For indoor use only • Suitable for pipes or cables with a diameter of 20 mm - 40 mm that are placed near walkways for structural reasons. • Ideal for use in manufacturing, shipping department and warehousing, stairwells or in confined areas such as basements or garages with low passageways, etc. • Marks danger spots, protects pipes and lines and mitigates impact injuries. • Profiles can be shortened to the desired length with a sharp cutter knife • Colour according to ASR A1.3 similar to RAL 1004/9003 (signal yellow/signal black) • Fire test according to DIN EN 13501-1 class E • Temperature resistant from -30°C - + 70°C • Profile length: 1 m • Inner diameter: 30 mm

Self-adhesive, flexible surface protection profile made of PU-foam. Marks and protects danger spots. • Self-adhesive, flexible surface protection profile made of polyurethane foam • For indoor use only • Ideal for use in production areas, shipping department and warehousing, basements, staircases, garages, on walls and joists, shelves and cabinets as well as on machines, storage trolleys etc. • Marks danger spots, protects surfaces, walls and mitigates impact injuries • Profiles can be shortened to the desired length with a sharp cutter knife • Colour according to ASR A1.3 similar to RAL 1004/9003 (signal yellow/signal black) • Fire test according to DIN EN 13501-1 class E • Temperature resistant from -30°C - + 70°C • Profile length: 1 m • Adheisive surface: 60 mm

Self-adhesive, flexible surface protection profile made of PU-foam. Marks and protects danger spots. • Self-adhesive, flexible surface protection profile made of polyurethane foam • For indoor use only • Ideal for use in production areas, shipping department and warehousing, basements, staircases, garages, on walls and joists, shelves and cabinets as well as on machines, storage trolleys etc. • Marks danger spots, protects surfaces, walls and mitigates impact injuries • Profiles can be shortened to the desired length with a sharp cutter knife • Colour according to ASR A1.3 similar to RAL 1004/9003 (signal yellow/signal black) • Fire test according to DIN EN 13501-1 class E • Temperature resistant from -30°C - + 70°C • Profile length: 1 m • Adheisive surface: 40 mm

Self-adhesive, flexible corner protection profile made of PU-foam. Marks and protects danger spots. • Self-adhesive, flexible corner protection profile made of polyurethane foam • For indoor use only • Ideal for use in production areas, shipping department and warehousing, basements, staircases, garages, on walls and joists, shelves and cabinets as well as on machines, storage trolleys etc. • Marks danger spots, protects surfaces, walls and mitigates impact injuries • Profiles can be shortened to the desired length with a sharp cutter knife • Colour according to ASR A1.3 similar to RAL 1004/9003 (signal yellow/signal black) • Fire test according to DIN EN 13501-1 class E • Temperature resistant from -30°C - + 70°C • Profile length: 1 m • Adhesive surface: 25 mm on each side

Self-adhesive, flexible corner protection profile made of PU-foam. Marks and protects danger spots. • Self-adhesive, flexible corner protection profile made of polyurethane foam • For indoor use only • Ideal for use in production areas, shipping department and warehousing, basements, staircases, garages, on walls and joists, shelves and cabinets as well as on machines, storage trolleys etc. • Marks danger spots, protects surfaces, walls and mitigates impact injuries • Profiles can be shortened to the desired length with a sharp cutter knife • Colour according to ASR A1.3 similar to RAL 1004/9003 (signal yellow/signal black) • Fire test according to DIN EN 13501-1 class E • Temperature resistant from -30°C - + 70°C • Profile length: 1 m • Adhesive surface: 19 mm on each side

Round, steel waste basket with aluminium fire-extinguishing lid. Capacity: 30 litres. • Round waste basket with fire-extinguishing lid for preventive fire protection • Self-extinguishing lid cuts off the oxygen supply and thus quenches the flames • TÜV certified • With aluminium fire-extinguishing lid • Made from steel with a scratch-proof, epoxy resin coating • Capacity: 30 litres

Round waste basket with fire-extinguishing lid. Made of steel with scratch-proof epoxy resin coating. • Round waste basket with fire-extinguishing lid for preventive fire protection • Self-extinguishing lid cuts off the oxygen supply and thus quenches the flames • TÜV certified • Made from steel with a scratch-proof, epoxy resin coating

Round waste basket with fire-extinguishing lid. Made of steel with scratch-proof epoxy resin coating. Capacity: 30 litres. • Round waste basket with fire-extinguishing lid for preventive fire protection • Self-extinguishing lid cuts off the oxygen supply and thus quenches the flames • TÜV certified • Made from steel with a scratch-proof, epoxy resin coating • Capacity: 30 litres

Cortec EcoLine® 3680 Biobased Open Atmosphere Corrosion Inhibitor. Cortec EcoLine® 3680 is a cutting-edge, eco-friendly corrosion inhibitor designed to shield against open atmosphere corrosion. Crafted from biobased, renewable resources, it offers sustainable protection for various metals.Key benefits include exceptional corrosion prevention through a self-healing protective layer, broad application versatility, easy application and removal, and non-toxic safety. Ideal for safeguarding metal parts, equipment, and machinery during storage, transport, or idle periods.Suitable for automotive, aerospace, electronics, and general manufacturing sectors.This innovative solution delivers long-lasting protection, reduces maintenance costs, and aligns with environmental responsibility.

Cortec MF Liquid Nuclear Grade-69 is a cutting-edge corrosion inhibitor specifically designed for the nuclear industry. Developed by Cortec Corporation, it offers superior protection against corrosion for critical equipment in nuclear power plants.Formulated to meet stringent nuclear industry standards, this liquid effectively inhibits corrosion on various metals including carbon steel, stainless steel, aluminium, copper, and their alloys. Its unique ability to form a protective, self-healing film shields metal surfaces from moisture, oxygen, and chemical contaminants.Engineered to withstand high radiation, temperatures, and aggressive chemicals, this non-toxic, non-flammable, and environmentally friendly product is ideal for both new installations and maintenance.

Whether self-adhesive labelling windows, scanner rails, sleeves or various pockets: Use the self-adhesive products flexibly to protect, identify or label your documents. Self-adhesive pictograms & pictogram signs are suitable for marking rooms.

Cortec EcoSonic® ESD Self-Seal Bubble Bags. Protect delicate electronics with these innovative bags.Powered by Nano VpCI®, they shield against ESD, corrosion, and damage. Self-sealing for easy use and eco-friendly.Ideal for electronics, instruments, auto parts, and more. Customisable sizes for perfect fit.Ensure product integrity with this comprehensive, sustainable solution. 

Cortec VpCI® 645 is a versatile corrosion inhibitor safeguarding metal components during storage and shipping. Leveraging Cortec's VpCI® technology, it vaporises to form a protective layer on all metal surfaces, including hidden areas. Unlike traditional methods, this provides complete, self-healing protection. Effective on various metals, it's environmentally friendly, easy to apply, and leaves no residue. Ideal for automotive parts, electronics, hydraulics, military equipment, and more. Apply by spraying, dipping, coating, or fogging. Protects up to 2 years, resists humidity, salt, and other corrosive elements. Safe, non-flammable, and meets military standards.