Sealing plates - Import export

MACHINE TYPE: MECAPLASTIC, MULTIVAC, … We manufacture saw blades and sealing plates for sealing machines. 1 /Saw blade 2 / Sealing plate 3 / Fixing screw

MACHINE TYPE: MECAPLASTIC, MULTIVAC, … We manufacture saw blades and sealing plates for sealing machines

Advantages of Heating Plates with Square Cartridge Heaters: -> Simple plate manufacture due to rectangular groove geometry, no deep-hole boring -> Simple heater installation by bending and pressing along the plate surface -> Complex plate geometries with bores and openings -> Optimal heat transfer due to 75% surface contact -> No casting with heat conductive compound -> Uniform temperature profiles due to thermally optimized groove layouts/power distribution and utilization of insulation plates -> high process temperatures (up to 450°C in aluminium, up to 700°C in stainless steel) Example "Heated Stamp": D=100 mm out of tempered tool steel up to max. 700°C continuous temperature. Fitted with 2 Square Cartridge Heaters 1500 W/ 230 V, 4,5 x 4,5 mm x 600 mm, with 50 mm unheated at the termination end. Annealed and formable with a nickel sheath, resistant up to 850°C surface temperature. Connection by fibreglass insulated pure nickel high-temperature leads (max. 500°C)

Square cartridge heaters are used where much power has to be installed near the surface of a tool, e.g. in cutting knives, sealing stations or hot plates. With a soft, malleable condition in stainless steel or nickel sheath square cartridge heaters can easily be pressed into common milled rectangular grooves. Apart from the advantageous heat transfer over ¾ of the sheath, it is not necessary to cement or cast in the heater which is imperative for round cartridge heaters. Unlike tubular heaters which are also available in square sections (see chapter Flexible Heating Pipes), the square cartridge heaters have the termination on one side and can be loaded with 16W/cm² (2.5W/in²) due to their special inside construction.

Due to our continuously flat sealing plate, different blister formats can be sealed. The format can be changed in just a few steps and without tools. Of course, we will provide you with the format inserts suitable for your product. On request, we can also supply you with the matching blister boxes and sealing foils.

Due to our continuously flat sealing plate, different blister formats can be sealed. The format can be changed in just a few steps and without tools. Of course, we will provide you with the format inserts suitable for your product. On request, we can also supply you with the matching blister boxes and sealing foils.

Due to the double-sided drawer, sealing and reloading can be done in one operation. The process times are freely selectable and operation is either continuous or by manual triggering by the operator. Due to our continuously flat sealing plate, different blister formats can be sealed. The format change can be done in a few steps and without tools. Of course, we will provide you with the format inserts suitable for your product. On request, we can also supply you with the matching blister boxes and sealing foils.

Due to the double-sided drawer, sealing and reloading can be done in one operation. The process times are freely selectable and operation is either continuous or by manual triggering by the operator. Due to our continuously flat sealing plate, different blister formats can be sealed. The format change can be done in a few steps and without tools. Of course, we will provide you with the format inserts suitable for your product. On request, we can also supply you with the matching blister boxes and sealing foils.

For different, individual heating applications like reactors with highly specific heating capacities, for containers, diffusers, seal flaps, aluminium heating plates/blocks, inner tubular heating, foundation heating of cold tanks.

Strapping tools for metal strapping 10-13-16/18-19-20 mm manual for flat surface, joint with copper-plated steel seal. Simple and cheap, is used for strapping packages and pallets of any size. This strapping tool requires a flat surface with a minimum length of 200 mm. In general it is not recommended in case of high productions. The sealing depends on the type of material and strap.

The ViscoMT-XM barrel emptying system with volumetric pump based on the endless piston principle. Your advantages: - for medium to high viscosity products (up to 7,000,000 mPas) - suitable for abrasive, shear-sensitive or lumpy materials loaded with fillers - clean wiping of the inside wall of the barrel due to follower plate with special sealing lip - suitable for cylindrical, ribbed or slightly conical barrels, plastic containers or containers with inliners - no lateral squeezing of the medium, as the follower plate is guided almost without pressure - discharge speed electronically adjustable - easy handling - pulsation-free conveyance/discharge - Residual quantity in the barrel: < 1% - compact design Application: Withdrawal of products directly from the delivery or storage container, e.g.: Tomato paste, honey, fats, icing, mascara and much more. pressure-controlled or level-controlled feeding of the products to filling machines or mixing processes.

Optigrun Inspection Chamber TAR 250 to keep roof drainage outlets free with four connection options for TAR 80/250 or TAR 120/250.For pressure drainage and keeping drainage outlets free 4 possible connections for the drainage gutter TAR 80/250 or TAR 120/250 (preperforated openings) Chamber walls and lid with entry seals With aluminium chequered plate Walkable

SEAMIAUTOMATIC SEALING DEVICE suitable for the sealing of all sorts of plastic and glass containers. 1. foil application device PolySeal Vario DIS (left hand side) electro-pneumatic stepless pressure regulation stepless manual height adjustment with height scale foil dispensing with 2 spot pre-sealing removable pre-sealing plates heat protection shield vacuum suction nozzle roller guide with running slide foil magazine for stackable pre-cut sealing lids VARIOTRONIC, control unit for the regulation of temperature, sealing time and pressure 2. sealing device PolySeal Vario PN (right hand side) electro-pneumatic stepless pressure regulation stepless manual height adjustment with height scale sealing head heating block, swingable, anodised aluminium hollowed out sealing die heat protection shield container holder VARIOTRONIC, control unit for the regulation of temperature, sealing time and pressure

Articulated pendulum joint for wheel loader FERRUM DM416 x4 . Scope of delivery as shown with seals as well as locking plate and screw connection

2 x 2 dosing pumps with motorised individual adjustment from 0 – 500 ml nearly maintenance-free machine with automatic central lubrication system Fully-automatic cleaning of filling machine (CIP/SIP) Quick and simplified format change (15 min.) Two filling machines enabling alternate operation/cleaning Heatable hopper (35°C – 95°C) Diversion and feeding of filled jars to the cooling zone Film applicator station Sealing station Multi-transport plate for all current jar diameters

Acceleration test: The acceleration test is based on a slide-crank mechanism with a flywheel as the crank. The crank imparts high acceleration and speed to the block with finite stroke. By adjusting the rotational speed of the motor, the service life of the block can be determined at different accelerations and speeds. — Both downward-bolt and upward-bolt track rails available — High rigidity structure — Reduced lubrication requirements for environmental soundness and maintenance cost saving — Built-in lubricant storage and supply system — Dustproof design Standard seals (S) — Reinforcement plate design (Patented)

The box is assembled and sealed with plate clips all around the box. The construction makes packing easy and ergonomical as one side can be assembled at a time. It is lighter than traditional wooden boxes. Like all our collapsible plywood boxes, it can be easily recycled. Wooden Clip lok box Features : .Delivered and stored flat .Solid: Highly resistant to falls and stacking .Can be made to measure starting at 5 units .Complies with the ISPM 15 standard .Suitable for all types of transport (air-land-sea

Circular Sight Glass Type 392 - PN16 with male thread connection Use: Observation and illumination of the interior of enclosed vessels (cauldrons, tanks, silos etc.). Sight glasses consist of round flange mountings to be welded into or onto a vessel, completed by a sight glass plate with appropriate seals

Circular Sightglass with weld adapted to the pipeline Application: Observation and illumination of the interior of enclosed vessels (cauldrons, tanks, silos etc.). Sight glasses consist of round flange mountings to be welded into or onto a vessel, completed by a sight glass plate with appropriate seals.)

Circular Sight Glass Fittings Typ 390 PN6-40 with welding ends according to DIN EN 1092 Use: Observation and illumination of the interior of enclosed vessels (cauldrons, tanks, silos etc.). Sight glasses consist of round flange mountings to be welded into or onto a vessel, completed by a sight glass plate with appropriate seals.)

Circular sight glass fittingsType 317 - PN 0 for welding - similar to DIN 28120 Use: Observation and illumination of the interior of enclosed vessels (cauldrons, tanks, silos etc.). Sight glasses consist of round flange mountings to be welded into or onto a vessel, completed by a sight glass plate with appropriate seals.

Circular sight glass fittingsType 318 - PN 2,5 - for welding - similar to DIN 28120 Use: Observation and illumination of the interior of enclosed vessels (cauldrons, tanks, silos etc.). Sight glasses consist of round flange mountings to be welded into or onto a vessel, completed by a sight glass plate with appropriate seals

Circular sight glass fittingsType 319 - PN 6 - for welding - similar to DIN 28120 Use: Observation and illumination of the interior of enclosed vessels (cauldrons, tanks, silos etc.). Sight glasses consist of round flange mountings to be welded into or onto a vessel, completed by a sight glass plate with appropriate seals

Circular Sight Glass Fittings DIN28120 - Type 320 - PN10/16 -for welding - DIN 28120 Use: Observation and illumination of the interior of enclosed vessels (cauldrons, tanks, silos etc.). Sight glasses consist of round flange mountings to be welded into or onto a vessel, completed by a sight glass plate with appropriate seals

PAI material considers the most efficient fusible thermoplastic in terms of temperature resistance, chemical resistance and mechanical stress. Its mechanical strength at 205 °C surpasses many engineering plastics at room temperature. BIEGLO offers PAI finished parts of the following types: Torlon® 4203; 4301; 4275; 4435; 4645; 5030 (30% GF); 7130 (30% CF). Each type is best suited for a particular application. Polyamide-imide can be used for a lot of appliations like gears, rollers, plasma chamber hardware and wafer contact fixtures. In addition, PAI material is ideal for high-temperature thermal insulators, burn-in test sockets, valve seats, fasteners, mechanical connections, rollers, labyrinth seals, drive wheels, valve plates, vanes and support gaskets.

Load capacity: 15 kN test load EN 124. Material: Frame made of 2 mm cold formed precision steel profiles. Hot dip galvanised. Durbar-plate cover. Features: Sealed cover, flat design. EPDM seal. Opening tool included. Applications: For pedestrian use inside buildings and their surroundings, particularly for inspection chambers. Installation: Installation must be carried out according to our instructions. With water-tight models, care must be taken to seal the outer frame into the surrounding flooring. Installation height ≈ 6 cm Special sizes possible *S = available from stock *O = to order

The -BASIC-LIFT- vacuum lifting device is designed exclusively for lifting and transporting airtight, flat and clean materials. Without battery or inconvenient power cables and thus purely mechanical, it is absolutely independent. But yet this type can lift loads of 1,200 kg and above. Functionality and characteristics The tried and tested modular AERO-LIFT system can be flexibly adapted to the job to be done and also used for very low loads. To ensure a long service life, all suction plates and sealing lips are made of high-duty perbunan. Its saftey is additionally guaranteed by vacuum gauge and a battery-operated warning device (the only electrical components of the lifter) and meets the requirement of the EU norm EN 13155. Handling is extremely easy. Every time the lifter is put down it automatically switches from „Suction“ to...

Glasslifter for field assembly at construction side for windows and glass Windows and glass are expensiv and damageable. AERO-LIFT has developed the CLAD-LIFT to handle glass with care and save. Four seperate vacuum circles with four vacuum pumps holds the load save even if one seal of a suction plate ist defectiv. Functionality and features Vacuum lift for glass panes weighing up to 1000 kg, with off-grid power supply. Safety is ensured during the work process by a so-called quadruple circuit system. The redundant valves, suction plates and vacuum tank are used for controlling four separate suction circuits. The four suction circuits are monitored separately by the warning system and thus ensure full load-bearing capacity even in the event of a power outage. The glass lift is able to pick up and put down the panes both vertically and horizontally. Glass panes can be turned unrestricted 360°. Thanks to the battery power supply, the vacuum lift can also be...

More benefit with your CLAD-BOY® with numerous options, you can expand the CLAD-BOY and make your work easier High-quality, UV-resistant suction plates with very long service life and high elasticity, even at temperatures in the minus range Suction plate for retraction depth approx. 230 mm for profiled sheetings Safe handling of profils with difference in altitude up to 10 mm Suction plate with pendulum suspension Adaption to fork lift truck with and without electrical swivelling function Extensive accessories and transport aids available STORE-BOY for safe and easy transportation STORE-BOY sturdy steel welded design, hot-dip galvanised, ideal for storing and transporting the CLAD-BOY and CLAD-BOY components. Ideally suited as a CLAD-BOY parking position. The CLAD-BOY can be stored compactly with all options (up to a 4m extension) in an area of 976 x 545 x 1038mm. The service life of suction plate seals is extended considerably by the Storeboy. The Storeboy can be transported...