Screw plugs - Import export

CSN® Explosionproof screw plug or flanged immersion heaters ( Ex ) are perfectly suited for direct heating of liquids or gas / air mixtures in hazardous areas. The devices are available with attached or integrated temperature monitoring systems. For these heaters various high quality stainless steel grades are available. The electical immersion heater type 94./..EEs….T.(.) is designed for the heating of liquids and quit gasair mixtures in the zone 1 and zone 2. The standars elements, mentioned in this list are suitable for DGRL (code 97/23/EG) Art. 3 Para. 3. The elements can be suited (on request) to other uses requiring another classification according to DGRL.

Material: Aluminium. Version: Bright. Flat seal asbestos-free. On request: Cap marked OIL. Drawing reference: 1) flat seal

China Oil Screw Plugs Supplier, Custom Stainless & Carbon Steel Oil Screw Caps sales@mxmparts.com

OPERATING TEMPERATURE: MAX 750°C SCREW PLUG that can be in IRON, INOX BRASS. Diameters and threads as requested by the customer. Armored heating elements with stainless steel pipe*. Max lenght cad. element up to 8,00 m. Resistive internal filament*** insulated with MAGNESIUM OXIDE of first choice.

O-ring threaded sealing plug with Chemical resistant: alcohol, weak alkalis, mineral oils, grease/oils, solvents, fuels. Chemical conditionally resistant: weak acids, water, hot. Light transmittance: opaque.

Ex-screw plug for the secure sealing of unused threaded or clearence holes. Suitable for applications in hazardous areas. Features: — Group (Zone) II 2 G (1, 2) II 2 D (21, 22) — Marking Ex eb IIC Gb Ex tb IIIC Db — Temperature range -40 °C / + 85 °C — Protection grade IP66 / IP68 - 10 bar (30 min.) — EU-Type certificate PTB 16 ATEX 1006 — IECEx-Certificate IECEx PTB 16.0017

Screw plug for the secure sealing of unused threaded or clearence holes. Features: — Temperature range -40 °C / + 100 °C — Protection grade IP66 / IP68 - 5 bar — Test Standard UL 514B

Screw plug for the secure sealing of unused threaded or clearence holes. Features: — Temperature range -40 °C / + 100 °C — Protection grade IP66 / IP68 - 5 bar — Test Standard UL 514B

Screw plug for the secure sealing of unused threaded or clearence holes. Features: — Temperature range depends on the material of the o-ring VMQ: -55 °C / + 120 °C EPDM: -40 °C / + 120 °C NBR: -40 °C / + 100 °C — Protection grade IP66 / IP68 - 10 bar (6h) / IP69K

Our assortment of threaded screw fittings ranges from connectors, double threaded nipples, counter nuts and bushings to reducing nipples, pipe double nipples, hose sleeves and pivoting bushings and up to bulkhead fittings, union nuts, extension pieces, end caps and locking screws. We also offer various fittings made of steel and malleable cast iron as well as assortment boxes with a chosen selection of screw fittings.

Cable fasteners: Stainless steel 1.4404 or PVDF. Hose: Plastic. Version: Cable gland: bright stainless steel, transparent plastic. Hose: coated Note: Washers supplied. EN 60423 metric thread. IP rating 66, 68 up to 15 bar, 69K. Tension relief corresponds to EU standard 62444. EHEDG certified. Seal insert ADI - free Temperature range: Stainless steel cable glands: -40 °C to +85 °C. Plastic cable glands: -20 °C to +85 °C. Hose: -20 °C to +95 °C.

Cable and housing PUR Contacts gold-plated bronze. Version: Bush (female) Voltage: U max. 60 V Current: I max. 4 A Terminals: 3-pin Security type: IP 67 Note: Plug connector with screw fitting. Plug encapsulated to cable.

Straight screw - in unions JIS, tapered inch Connection thread: Whitworth Rohrgewinde (BSPP), cylindric with 60° outer cone Screw - in thread: Whitworth pipe thread (BSPT), tapered Screwed plug: ... Category Screw connections, adapter a. accessories / JIS fittings / Straight / Screw-in connections / Imperial screw-in thread BSPT beveled / Steel Product number supplier 47033959

Straight screw - in unions JIS, tapered inch Connection thread: Whitworth Rohrgewinde (BSPP), cylindric with 60° outer cone Screw - in thread: Whitworth pipe thread (BSPT), tapered Screwed plug: ... Category Screw connections, adapter a. accessories / JIS fittings / Straight / Screw-in connections / Imperial screw-in thread BSPT beveled / Steel Product number supplier 47033959

Most common ends are different types of end loops and hooks, there are also a wide range of other mechanical attachment possibilities such as coiled in and screwed in attachments. Examples are, half hooks, German loops, English loops, extended hooks, side hooks, side loops, screw plugs and screw shackles.

Straight screw - in unions KOMATSU, tapered inch Connection thread: metric fine thread, cylindric with 60° outer cone Screw - in thread: Whitworth pipe thread (BSPT), tapered Screwed plug: form C ... Category Screw connections, adapter a. accessories / Komatsu screw connections / Straight / Screw-in connections / Imperial screw-in thread BSPT beveled / Steel Product number supplier 47523357

Housing steel. Viewing glass thermoplastic polyamide. O-ring and flat seal rubber (NBR). Reflector aluminium. Screw and hex nut steel. Version: Housing painted black. Transparent viewing glass, high mechanical stability, non-ageing, temperature resistant with oil up to 100 °C, with water up to 70 °C. Reflector painted white, markings and scale black. Screw and hexagon nut, electro zinc-plated. Note: The oil level gauges can either be fastened as shown in the illustration or directly in the threaded hole. Centre distance for the fastening holes = L1 ±0.5. The oil level gauges are suitable for tanks operating without pressure. Maximum operating temperature: 100 °C.

Housing fibreglass reinforced thermoplastic polyamide. Sight glass thermoplastic polyamide. O-ring and flat seal NBR. Reflector PVC. Float plastic. Screw and nut, steel. Version: Housing black. Sight glass crystal clear, high mechanical stability, non-ageing. Reflector white. Float red, with magnetic element. Screw and nut electro zinc-plated. Note: The oil level gauge not only enables the oil level to be viewed but also recorded using a REED switch. In addition, the oil level gauges can also emit an electric signal if the temperature of the liquid inside the container reaches the threshold of 70 °C. As soon as the float element approaches the selected minimum value after the circuit has been closed, the system emits an electric signal. The sensor is located on the housing and its height can be adjusted in line with the control requirements for the oil level. The minimum level is ca. 35 mm from the centre of the lower fastening screw.

Straight screw - in unions KOMATSU, tapered inch Connection thread: metric fine thread, cylindric with 60° outer cone Screw - in thread: Whitworth pipe thread (BSPT), tapered Screwed plug: form C ... Category Screw connections, adapter a. accessories / Komatsu screw connections / Straight / Screw-in connections / Imperial screw-in thread BSPT beveled / Steel Product number supplier 47523357

Flameproof mini line heaters ATEX Ex II 2 G Ex’d’ IIC T4-T6 nach EN60079-0 und EN60079-1 The Exheat range of flameproof mini line heaters consist of a screw plug or flanged type immersion heater mounted in a thermally insulated heating vessel. They are designed to efficiently transfer heat to a flowing medium (liquid, air or gas). All flameproof heaters are fully ATEX certified and designed for use in zone 1 & 2 hazardous areas, gas group IIC.

EBS-plug 7-pole to screw UNI complete including screw terminals up to 6 mm² Category Electrical equippment for vehicles / ABS/EBS / Plug / EBS with screw-contacts Product number supplier 777558

RST20i3 connector, angled 90°, 3 positions, plug, connection type screw connection, rated voltage 250 V, rated current 20 A, cable diameter 6 – 10 mm, coding color / contact insert black

Features • The Plug & Play range includes three dowel sizes (ø 5, 6 and 8 mm) for the most common projects • The all-purpose wall plug Trika holds in almost all building materials • Perfectly matched screws for optimum wall plug function Contents: • 60x all-purpose wall plugTrika 5/31* + screws • 70x all-purpose wall plug Trika 6/36* + screws • 30x all-purpose wall plug Trika 8/51 + screws * only suitable for single-layer plasterboards

The artist of the area management: On less than 1 m² the "Delux" displays 18 different print media, brochures and flyers, decorative and protected. The wall brochure holder becomes an individual wall magazine. Your flyers and advertising media are 100% visible as the display is completely transparent. The brochure hanger made of unbreakable acrylic is equipped with 48 mm filling depth per compartment. Screws and rawl plugs for wall mounting are included.

EBS-plug 7-pole to screw UNI complete including screw terminals up to 6 mm² Category Electrical equippment for vehicles / ABS/EBS / Plug / EBS with screw-contacts Product number supplier 777558

RST20i3 connector, straight, 3 positions, plug, connection type screw connection, rated voltage 250 V, rated current 20 A, cable diameter 6 – 10 mm, coding color / contact insert black

In 2015 the product name was changed. The old product name was Castrol Optimol Paste MF. Silver-grey high-temperature paste with solid lubricants Description Castrol Molub-Alloy Paste MF (previous product name Castrol Optimol Paste MF) is particularly suitable for assembling screw connections in the high temperature range up to +1100 °C . Even under extreme pressures, it protects the surfaces from scoring, corrosion and seizing. In high-temperature areas, in wet conditions and in aggressive environmental influences, Castrol Molub-Alloy Paste MF seals the components and ensures good separation. Application Castrol Molub-Alloy Paste MF can be used for components at risk of corrosion, exposed to high temperatures and the environment , such as hot-screw connections, spark plug and lambda sensor threads.

Assembly lubrication of machine parts, screw connections, fittings, flange and plug-in connections, guides, sliding and sealing surfaces of ovens, boilers, burners, motors, engines subject to high-temperature conditions Separating paste Advantages and benefits Excellently suited for preventing seizing and burning together Highly effective due to outstanding separating action and pressure absorption Good protection against ingress of splashing and condensed water Free of heavy metal compounds Good corrosion protection Excellent water resistance Wide operating temperature range Optimum ratio of screw tightening torque to achievable pre-tension Also available as spray version OKS 2351 For best adhesion, clean contamination and other lubricants from thread and slide surfaces. Best way is to clean mechanically first (for example, with a wire brush) and then with OKS 2610/OKS 2611 universal cleaning agent. Apply sufficient OKS 235

SL 800 provides optimal protection against wear and is suitable industry-wide. It contains premium active ingredients with long- lasting effects. The special lubricant protects all metal friction surfaces that are exposed to extreme temperatures and is there- fore suitable for use at temperatures of up to around 800ºC (to around 200ºC with dry lubrication) and will withstand cold down to around -35ºC. SL 800 prevents corrosion, oxidation, freezing, galling and wear. Adherent and wear-resistant Pressure-resistant Water-, salt water- and solvent vapour-proof CFC- and silicone-free Free from hard metals (e.g. lead, nickel, cadmium, copper) Makes disassembly easier, even after a long period of use Fields of application Brake systems, exhaust pipe fittings, spark plugs, gears, chains, channels and gearboxes, screw-, bolt-, plug- and pipe-connections, kettle- and oven-fittings. Usage Shake can vigorously for around 30 seconds until the mixing ball can be heard, then just spray SL 800...