Safety tool - Import export

Cable cutting unit in several sizes for cutting cables, in case of failure under voltage.

SOL-CARE™ Safety Multi-Sample Blood Collection Needle is a safety-engineered tool for multi-sample venous blood collection. The device is designed with a safety mechanism covering the needle after use. In the activated position, the needle cover guards against accidental needlestick during normal handling and disposal. It is also offered with a pre-attached holder. • Simple and intuitive Making safety conversion straightforward • Thin-wall nedle Provides effective flow rate to reduce the risk of blood hemolysis • Low-angle bevel design Helps to minimize pain and discomfort for patients

SOL-CARE™ Safety Multi-Sample Blood Collection Needle is a safety-engineered tool for multi-sample venous blood collection. The device is designed with a safety mechanism covering the needle after use. In the activated position, the needle cover guards against accidental needlestick during normal handling and disposal.

60 inch long,1/4 inch yellow,blue.and red hoses feature a 800 PS: working pressure and 4000 PSI burst pressure - ideal for standard refrigerants. Easy to operate and install.strong sealing for duraoiiity and safety .Necessary tools for HVAC.car air condition maintenance and coolant or Freon adding. Refrigerant charging hose with Diagnostic Manifold Gauge Set deigned to meet 1/4" SAE requirement for refrigerant permutation, fit most refrigerants like R410A, R22,R404.Standard 1/4 inch female flare fittings with a valve core depressor and 4S*bend on one end for convenient access to the system Manifold with built-in sight glass. DuraOle metal casing. Aluminum alloy testing manifold body R410A Connectors (2pc): 5/16" SAE. refrigerant anti blowback fittings refrigeration charging hoses valve discharge conditioning refrigerant charging refrigerant discharge recharge yellow jacket interdynamics conditioning recharge Bundle

Lever hoists are particularly useful in scenarios where manual lifting or pulling is impractical or physically challenging. They are commonly used for lifting and positioning heavy machinery during installation or repair, pulling and tensioning heavy objects or structures, hoisting loads in confined spaces where space is limited, and securing loads onto trucks or trailers for transportation. Lever hoists offer exceptional lifting and pulling capabilities, precise control, and enhanced safety features, making them reliable tools for handling heavy loads in various industries. Ronix RH-4108 is no exception to any of these benefits and can come in handy in a wide range of use cases and scenarios. If you are in search of a new lever hoist, the RH-4108 model is one of the best options on the tools market. Keep reading to learn more about its main features and capabilities

Prefabricated Mobilisation Buildings Site Office & Dormitory Furnitures WWTP/RO Plant Laboratory Equipments Safety Equipments Hand tools

1. Advanced CNC machining center with servo turning table and 4 servo clamps. 2. Suitable for processing aluminum profiles (up to 3mm thick) and steel profiles (up to 2mm thick) with super fast speed (5m/min) and efficiency thanks to laser technology. High pressure air compressor (1.6Mpa) and cooling station are included. 3. The machine completes milling, drilling, chamfering, slotting and other multifunctional precisely in one time. 4. The work table will be positioned from +90° to -90° variable angle. 5. Automatic lifting safety cover ensures operator safety. 6. Automatic tool change: standard equipped with 6-position hidden tool magazine, standard equipped with 3 tool holders. 7. Operation in Windows environment industrial PC with monitor. Friendly machine interface with user-friendly operation. 8. In line with ERP software, it can perform code scanning and automatic processing.

Test toolings examples: SAFETY SUITCASE EQUIPMENT FOR INFLATING STATION AIRBUS: This equipment goes inside the plane with a connection via a false door to exchange information towards the command control writing desk. He allows to warn every person, located inside the plane, over the test progress by sound and bright signals. SWEEPING RADIAL DEVICE: The GASPRA system is a modular system allowing the probe positioning inside an engine to make pressure and/or temperature mappings. It has for characteristics a Radial road 300mm, and an angular movement at 90 °. CYCLEUR CABINET : This equipment is used in test bench during the engine plane qualification phase. It insures the endurance cycles creation and the progress. 6 sets have been created durung the qualification phase : LEAP 1A, 1B et 1C over several european sites: France, Belgium, Poland.

ENS HYDRAULIC NUT SPLITTER Our hydraulic nut splitter offers a reliable and effective solution to the removal of seized and corroded nuts. Triple edge replaceable cutting blade Blade positioning scale to eliminate bolt damage Cutting depth fixed - Nut size adjustable via rotating cylinder! Size range from 3/4" to 3-1/2" bolt diameters Designed to fit ANSI, ASME B.16.5 flanges Will work with some API flanges – contact factory for details Twin line hydraulic version available for subsea use Versatile, reliable and trouble-free operations Operates off a standard 10,000 psi (700 bar) pump unit Built-in safety relief valve to protect tool & operator Double acting (subsea) version comes standard with 700 bar, 1/4" NPT, Push to Connect (PTC) couplers. To use with top side pumps, change out couplers to 700 bar, 1/4" NPT, Screw-to-connect style.

10,000 PSI (700 BAR) CLASSIC SERIES ELECTRIC HYDRAULIC PUMP The PE55TWP-BS has been the market leading electric pump for over 30 years & is therefore tried & tested. A simple, light-weight design with a recent upgrade that has created a cost-effective workhorse. Quality means Lower Life-Cycle Costs: Over 100,000 cycles Continuous duty up to 122°F (50°C) ambient Proven design = Proven reliability Enhanced Usability: Two Speed High Performance pump Retract side internal relief valve protects tool Hand remote Four-tool manifold (-4 models only) allow use of up to four tools simultaneously 4" calibration capable gauge Use with single or double acting tools Designed with Safety in Mind: Easily adjusted pressure regulator (relief) valve 1,500 psi (103 bar) pressure retract relief valve CAUTION: This system should not be used for lifting applications.

Our Spinodal materials are custom-engineered for safety hand tools that are non-sparking, non-magnetic and highly corrosion resistant. They benefit from age hardening techniques that further increase their strength and hardness for high performance safety tools. Alloys AM 388™ (UNS C72650) is a copper based Spinodal alloy that offers non-sparking, non-magnetic and high strength properties. AM 388™ is accepted as a safe replacement material for Beryllium Copper alloy. Safety Tool Applications Engineered for an array of hand-held non-sparking safety tools including: Corrosion resistant wrenches Hammers, axes and picks Corrosion resistant screwdrivers, pliers and spatulas

Tool case for ipr-Safety Cutting Unit Internal foam protects the tool and is tailored in shape for the particular cutting head Waterproof, unbreakable, dustproof Easy opened two-stage closure Open-cell core with resistant wall construction – robust, lightweight O-ring gasket Diemension: 750 x 450 x 286 mm

Bag for Safety Cutting Unit High-strength grey polyester Waterproof > 0,2 bar High abrasion resistance Protection of tools against environmental influences (dirt/dust) Ordered, space-saving layout Easy handling loss weight Dimension: 4560 x 270 x 300 mm

Non Sparking TOOLS Striking Wrench Ring End Non-Sparking, Non-Magnetic, Corrosion-Resistant  Made in China CodeSpecs OY6160 17、19、22、24、27、30、32、34、36、41、 46、50、55、60、65、70、75、80、85、90、 95、100、110、120、130、140、150(mm) Our beryllium mater alloy import from Kazakhstan,which make the raw materials of non-sparking safety tools pure,and ensure our non-sparking safety tools high quality compared with others.And our non-sparking safety hand tools are punch forged manufacturing processes,best quality design and manufacturing processes,make non sparking safety tools high density and strength. There are 2 kinds of non-sparking, non-magnetic materials available: 1.Be-Cu: Beryllium Copper (Best material for Non Sparking Non Magnetic Safety Hand Tools, the very highest quality); 2.Al-Cu: Aluminium Bronze (Economic material for Non Sparking Safety Hand Tools, still excellent).

NON SPARKING TOOLS CHAIN PIPE WRENCH COPPER BERYLLIUM NumberSpecification OY6129-1002100*600mm OY6129-1004150*600mm OY6129-1006200*900mm OY6129-1008300*900mm Our beryllium mater alloy import from Kazakhstan,which make the raw materials of non-sparking tools pure,and ensure our non-sparking tools high quality compared with others.And our non-sparking safety hand tools are punch forged manufacturing processes,best quality design and manufacturing processes,make non sparking safety tools high density and strength. There are 2 kinds of non-sparking, non-magnetic materials available: 1.Be-Cu: Beryllium Copper (Best material for Non Sparking Non-Magnetic Tools, the very highest quality); 2.Al-Cu: Aluminium Bronze (Economic material for Non Sparking Tools, still excellent).

Non Sparking Tools Sledge Hammer 2000g Copper Beryllium NumberSpecification OY6192A-10021000g OY6192A-10041400g OY6192A-10061500g OY6192A-10081800g OY6192A-10102000g OY6192A-10122200g OY6192A-10142500g OY6192A-10162700g OY6192A-10183000g OY6192A-10203600g OY6192A-10224000g OY6192A-10244500g OY6192A-10265000g OY6192A-10285400g OY6192A-10306400g OY6192A-10327200g OY6192A-10348000g OY6192A-10368200g OY6192A-10389100g OY6192A-10409900g There are 2 kinds of non-sparking, non-magnetic materials available: 1.Be-Cu: Beryllium Copper (Best material for Non Sparking Non Magnetic Safety Hand Tools, the very highest quality); 2.Al-Cu: Aluminium Bronze (Economic material for Non Sparking Safety Hand Tools, still excellent).

Non Sparking Tool Pipe Wrench 600mm Copper Beryllium NumberSpecification OY6131-100225*200mm OY6131-100430*250mm OY6131-100640*300mm OY6131-100850*350mm OY6131-101060*450mm OY6131-101275*600mm OY6131-101485*900mm OY6131-1016110*1200mm Our beryllium mater alloy import from Kazakhstan,which make the raw materials of non-sparking tools pure,and ensure our non-sparking tools high quality compared with others.And our non-sparking safety hand tools are punch forged manufacturing processes,best quality design and manufacturing processes,make non sparking safety tools high density and strength. There are 2 kinds of non-sparking, non-magnetic materials available: 1.Be-Cu: Beryllium Copper (Best material for Non Sparking Non-Magnetic Tools, the very highest quality); 2.Al-Cu: Aluminium Bronze (Economic material for Non Sparking Tools, still excellent).

NON SPARKING TOOLS IMPACT SOCKET 1"Dr Copper Berllium CodeSpecs OY6108 19、21、22、24、26、27、29、30、32、34 35、36、38、41、46、50、52、55、58、60 65、70、75、80（mm） Our beryllium mater alloy import from Kazakhstan,which make the raw materials of non-sparking tools pure,and ensure our non-sparking tools high quality compared with others.And our non-sparking safety hand tools are punch forged manufacturing processes,best quality design and manufacturing processes,make non sparking safety tools high density and strength. There are 2 kinds of non-sparking, non-magnetic materials available: 1.Be-Cu: Beryllium Copper (Best material for Non Sparking Non-Magnetic Tools, the very highest quality); 2.Al-Cu: Aluminium Bronze (Economic material for Non Sparking Tools, still excellent).

The Apex µ-Guard line of Covered Drive Tools is the tool of choice for enhancing operator safety in almost all leading assembly plants. Apex® µ-Guard ™ free-spinning covered drive tools increase operator safety by significantly reducing or eliminating pinch points when operators are wearing gloves. Apex µ-Guard provides a protective barrier between genuine Apex fastener tools and your finely finished workpiece, thereby delivering the proven Apex performance plus the best protection available against in-system damage. The free-spinning design provides maximum protection for polished and highly sensitive surfaces. Apex has solutions for all aspects of safety on an assembly line when it comes to fastener drive tools. In addition to our line of Covered Bits, Bit Holders, Sockets, Extensions, and Universal Swivel Wrenches, as well as µ-Guard Gap Covers to eliminate the gap between a socket and an extension or between the right-angle power tool and a socket / extension.

Gizelis Robotics provides turn-key solutions for machining with robots for all kind of materials like wood, stone, marble, alumium, steel etc. The robot cell consists of: Robot Spindle Robot CNC CAM Software Machining table Automatic tool change Safety fence There is also the possibility for costumers to bring their parts and make them a live demo. Robot CNC CAM software lets you program robots with external axes such as rotary tables and linear tracks as easily as you could program a 5-axis NC machine. Working closely with the highly skilled integrator Gizelis Robotics opened up new opportunities for testing the software which guarantees fast, accurate and easy multi-axis programming for robots.

The Company and the Group KRAFTWERK Europe AG Founded in 1979 as the individual company IMPEX Patrick Wyss, the business became a family-run incorporated company in 2006, taking the name KRAFTWERK Europe AG due to the degree of familiarity of the KRAFTWERK brand. The main activities of KRAFTWERK Europe AG are the design, development, production, import, export, marketing and distribution of high-quality tools for professional and industrial use. KRAFTWERK Europe AG is the owner of the worldwide registered KRAFTWERK® industrial tool brand, which is well-known today in every European country and also in Asia. The company also sells other brands of tools. Due to its talent for innovation, KRAFTWERK Europe AG holds several registered patents and copyrights around the world. The hand tools are in generally manufactured in Asia by carefully chosen, ISO-certified plants with strict quality controls by KRAFTWERK Europe AG’s own personnel. Along with ensuring high quality standards, our main p

The Company and the Group KRAFTWERK Europe AG Founded in 1979 as the individual company IMPEX Patrick Wyss, the business became a family-run incorporated company in 2006, taking the name KRAFTWERK Europe AG due to the degree of familiarity of the KRAFTWERK brand. The main activities of KRAFTWERK Europe AG are the design, development, production, import, export, marketing and distribution of high-quality tools for professional and industrial use. KRAFTWERK Europe AG is the owner of the worldwide registered KRAFTWERK® industrial tool brand, which is well-known today in every European country and also in Asia. The company also sells other brands of tools. Due to its talent for innovation, KRAFTWERK Europe AG holds several registered patents and copyrights around the world. The hand tools are in generally manufactured in Asia by carefully chosen, ISO-certified plants with strict quality controls by KRAFTWERK Europe AG’s own personnel. Along with ensuring high quality standards, our main p

The Company and the Group KRAFTWERK Europe AG Founded in 1979 as the individual company IMPEX Patrick Wyss, the business became a family-run incorporated company in 2006, taking the name KRAFTWERK Europe AG due to the degree of familiarity of the KRAFTWERK brand. The main activities of KRAFTWERK Europe AG are the design, development, production, import, export, marketing and distribution of high-quality tools for professional and industrial use. KRAFTWERK Europe AG is the owner of the worldwide registered KRAFTWERK® industrial tool brand, which is well-known today in every European country and also in Asia. The company also sells other brands of tools. Due to its talent for innovation, KRAFTWERK Europe AG holds several registered patents and copyrights around the world. The hand tools are in generally manufactured in Asia by carefully chosen, ISO-certified plants with strict quality controls by KRAFTWERK Europe AG’s own personnel. Along with ensuring high quality standards, our main p

The patented EPM magnetic clamping plates *** Patent-No. EP1874504 *** have a solid steel surface and are therefore significantly more resistant than conventional plates with epoxy resin against hot chips, coolant and other processing influences. The workpiece is clamped on the EPM magnetic clamping plate MAGNASLOT within seconds through an impulse current. This magnetic clamping plate allows for 5-side processing of your workpieces in only one clamp. This reduces equipping times to a minimum and increases productivity. Through the use of pole extensions, which adjust to the workpiece surface, any unevenness on the workpiece can be compensated for and a deformation of the workpiece can be prevented. The magnet field from the MAGNASLOT magnetic clamping plate guarantees low-vibration clamping of your workpieces. This protects the milling spindle as well as your tools, increases process safety and extends the service life.

The patented EPM magnetic clamping plates *** Patent-No. EP1874504 *** have a solid steel surface and are therefore significantly more resistant than conventional plates with epoxy resin against hot chips, coolant and other processing influences. The workpiece is clamped on the EPM magnetic clamping plate MAGNASLOT within seconds through an impulse current. This magnetic clamping plate allows for 5-side processing of your workpieces in only one clamp. This reduces equipping times to a minimum and increases productivity. Through the use of pole extensions, which adjust to the workpiece surface, any unevenness on the workpiece can be compensated for and a deformation of the workpiece can be prevented. The magnet field from the MAGNASLOT magnetic clamping plate guarantees low-vibration clamping of your workpieces. This protects the milling spindle as well as your tools, increases process safety and extends the service life.