Results for
ECO-ALIANCE LLC
Russia
Hydraulic oil HLP 32/46/68 hydraulic oils with a high level of performance. They are manufactured on the basis of highly refined petroleum base oils with a multifunctional additive package that improves filterability, antioxidant, anticorrosive, antiwear, demulsifying and antifoam properties. Designed for use in hydraulic systems of industrial equipment operating under high mechanical and thermal loads, equipped with servo-hydraulic units, proportional control systems and filter elements with a filtration rating of 3-5 microns.
Request for a quoteECO-ALIANCE LLC
Russia
Base oil SN-400 is a petroleum distillation product, a base component of commercial lubricating oil. In general, base oils are produced in series with different viscosity, but with the same other characteristics. Application area Base oil SN-400 is intended for use in machines and mechanisms of industrial equipment, the operating conditions of which do not impose special requirements on the antioxidant and anticorrosive properties of oils. It is also used as a basis for the production of lubricants, mainly for motor oils production. Benefits of Base Oil SN-400 Can be used as base components in the manufacture of lubricating oils It is possible to manufacture oils of intermediate viscosity classes (for example, I-30A) by mixing more viscous oils with less viscous oils in an appropriate proportion In almost all cases, this oil can be replaced with doped oils of the IGP series of appropriate viscosity.
Request for a quoteECO-ALIANCE LLC
Russia
VMG3 oil belongs to the class of hydraulic fluids, and, accordingly, is intended for use in hydraulic systems. As a rule, it is used in heavy equipment - construction, logging, lifting, as well as in cargo vehicles, such as mining dump trucks. It is widely used for tracked vehicles. It favorably differs from other hydraulic oils with a low pour point, which makes it possible to use it not only in the cold season, but also in the Far North. Hydraulic drives using VMGZ can be started without preheating the oil - this is a very important factor when working in winter conditions. Another plus of VMGZ oil is its increased resistance to the formation of deposits. Anti-corrosive components maximally protect hydraulic components from negative environmental influences. The next important point is cost. VMGZ is a completely Russian development, produced from local raw materials by domestic producers.
Request for a quoteECO-ALIANCE LLC
Russia
Industrial oil I-12 / I-20 / I-40A / I-50 is intended for use in various types of low and medium loaded industrial equipment, the operating conditions of which do not impose special requirements on the antioxidant and anticorrosive properties of the oil. The oils are produced on the basis of high quality mineral base components of the distillate type. The quality corresponds to All Union State standard – GOST 20799-88.
Request for a quoteECO-ALIANCE LLC
Russia
Isoparaffinic oil VHVI-4/6/8 - belongs to the base oils of group III and is used for the production of high-quality motor oils. VHVI-4/6/8 base oil is produced by hydrotreating of the hydrocracking residue at high pressure and has a high viscosity index, good low temperature properties, ultra-low sulfur content, low aromatic hydrocarbons content and low volatility. Low pour point provides high pumpability of oil, easy engine start at subzero temperatures, which allows them to be used in various climatic conditions Thermo-oxidative stability reduces oil oxidation at high engine temperatures, reduces the formation of deposits Low volatility reduces the frequency of oil refills. Long run of oil in severe operating conditions (longer service life by 1.5-2 times compared to mineral oils). Compatible with mineral oils and esters.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
ECO-ALIANCE LLC
Russia
Base isoparaffinic oil MVI-2 manufactured by OJSC NGK Slavneft-YANOS (HVI-2, MGA-8 manufactured by Taneco). Isoparaffinic oil MVI-2 belongs to group II of base oils and is used for the production of high quality engine oils. MVI-2 oil is obtained by processing of naphthenic oil. It has good detergent properties, a sufficient viscosity index and a low pour point. Application area MVI-2 oil is used as a base for transformer, hydraulic oils, steering gear oils and special coolants for metalworking, turbine and other energy oils. MVI-2 advantages Low pour point provides high pumpability of oil, easy engine start at subzero temperatures, which allows them to be used in various climatic conditions. Thermo-oxidative stability reduces oil oxidation at high engine temperatures, reduces the formation of deposits. Low volatility reduces the frequency of oil refills. Long run of oil in difficult operating conditions.
Request for a quoteECO-ALIANCE LLC
Russia
BS "Bright Stock" / KS-19p oil is a high-viscosity cylinder oil, that refers to high-viscosity base oils obtained by distillation under atmospheric pressure and vacuum distillation, extraction and dewaxing of solvents from residual oils – as well as at the end of hydrotreating. The name "Bright Stock" comes from a method of producing a high viscosity cylinder oil of a bright color (Bright) by mixing naphtha with a dark colored cylinder oil, the mixture is left until winter, the wax ingredients are extracted from it, and then the naphtha liquid is distilled. BS "Bright Stock" oil is contained in gear oils, marine diesel engine oils, cylinder oils and other oils with a high viscosity index.
Request for a quoteECO-ALIANCE LLC
Russia
Base oil SN-80 is a petroleum distillation product, a base component of commercial lubricating oil. In general, base oils are produced in series with different viscosity, but with the same other characteristics. Application area Base oil SN-80 is intended for use in machines and mechanisms of industrial equipment, the operating conditions of which do not impose special requirements on the antioxidant and anticorrosive properties of oils. It is also used as a basis for the production of lubricants, mainly for motor oils production. Benefits of Base Oil SN-80 Can be used as base components in the manufacture of lubricating oils. It is possible to manufacture oils of intermediate viscosity classes (for example, I-30A) by mixing more viscous oils with less viscous oils in an appropriate proportion. In almost all cases, this oil can be replaced with doped oils of the IGP series of appropriate viscosity.
Request for a quoteResults for
Industry - Import exportNumber of results
9 ProductsCountries
Company type