Results for
ECO-ALIANCE LLC
Russia
Base oil SN-400 is a petroleum distillation product, a base component of commercial lubricating oil. In general, base oils are produced in series with different viscosity, but with the same other characteristics. Application area Base oil SN-400 is intended for use in machines and mechanisms of industrial equipment, the operating conditions of which do not impose special requirements on the antioxidant and anticorrosive properties of oils. It is also used as a basis for the production of lubricants, mainly for motor oils production. Benefits of Base Oil SN-400 Can be used as base components in the manufacture of lubricating oils It is possible to manufacture oils of intermediate viscosity classes (for example, I-30A) by mixing more viscous oils with less viscous oils in an appropriate proportion In almost all cases, this oil can be replaced with doped oils of the IGP series of appropriate viscosity.
Request for a quoteECO-ALIANCE LLC
Russia
Base oil SN-150 is a petroleum distillation product, a base component of commercial lubricating oil. In general, base oils are produced in series with different viscosity, but with the same other characteristics. Application area Base oil SN-150 is intended for use in machines and mechanisms of industrial equipment, the operating conditions of which do not impose special requirements on the antioxidant and anticorrosive properties of oils. It is also used as a basis for the production of lubricants, mainly for motor oils production. Benefits of Base Oil SN-150 Can be used as base components in the manufacture of lubricating oils. It is possible to manufacture oils of intermediate viscosity classes (for example, I-30A) by mixing more viscous oils with less viscous oils in an appropriate proportion. In almost all cases, this oil can be replaced with doped oils of the IGP series of appropriate viscosity.
Request for a quoteECO-ALIANCE LLC
Russia
Base oil SN-80 is a petroleum distillation product, a base component of commercial lubricating oil. In general, base oils are produced in series with different viscosity, but with the same other characteristics. Application area Base oil SN-80 is intended for use in machines and mechanisms of industrial equipment, the operating conditions of which do not impose special requirements on the antioxidant and anticorrosive properties of oils. It is also used as a basis for the production of lubricants, mainly for motor oils production. Benefits of Base Oil SN-80 Can be used as base components in the manufacture of lubricating oils. It is possible to manufacture oils of intermediate viscosity classes (for example, I-30A) by mixing more viscous oils with less viscous oils in an appropriate proportion. In almost all cases, this oil can be replaced with doped oils of the IGP series of appropriate viscosity.
Request for a quoteLLC SMARTSERVICE
Russia
Repair kit for pipelines with all accessories for mounting the sleeve and repairing the pipe. The sleeve fitting is manufactured of solid-woven reinforced fiberglass, made in a unique way, which gives a number of advantages compared to standard fittings: fire resistance, high pressure, corrosion resistance, from 30 years of operation. Scope of fitting application - pipelines, including non-metallic, underground, ground, aboveground and underwater versions, with a diameter of 50 to 1200 mm with a maximum internal working pressure of up to 20 Mpa (200 Bar) for pumping gas, oil, petroleum products and other gaseous and liquid media, operated at temperatures from minus 60°C to plus 180°C. Fittings are used for permanent (major) repairs of through and part-through flaws of pipelines with a maximum internal pressure of not more than 12 MPa. Fittings are used for sealing through flaws (fistulas), for integral repair of pipelines with a pressure of up to 20 MPa. Major repairs.
Request for a quoteLLC SMARTSERVICE
Russia
Repair kit for pipelines with all accessories for mounting the sleeve and repairing the pipe. The sleeve fitting is manufactured of solid-woven reinforced fiberglass, made in a unique way, which gives a number of advantages compared to standard fittings: fire resistance, high pressure, corrosion resistance, from 30 years of operation. Scope of fitting application - pipelines, including non-metallic, underground, ground, aboveground and underwater versions, with a diameter of 50 to 1200 mm with a maximum internal working pressure of up to 20 Mpa (200 Bar) for pumping gas, oil, petroleum products and other gaseous and liquid media, operated at temperatures from minus 60°C to plus 180°C. Fittings are used for permanent (major) repairs of through and part-through flaws of pipelines with a maximum internal pressure of not more than 12 MPa. Fittings are used for sealing through flaws (fistulas), for integral repair of pipelines with a pressure of up to 20 MPa. Major repairs.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
LLC SMARTSERVICE
Russia
Repair kit for pipelines with all accessories for mounting the sleeve and repairing the pipe. The sleeve fitting is manufactured of solid-woven reinforced fiberglass, made in a unique way, which gives a number of advantages compared to standard fittings: fire resistance, high pressure, corrosion resistance, from 30 years of operation. Scope of fitting application - pipelines, including non-metallic, underground, ground, aboveground and underwater versions, with a diameter of 50 to 1200 mm with a maximum internal working pressure of up to 20 Mpa (200 Bar) for pumping gas, oil, petroleum products and other gaseous and liquid media, operated at temperatures from minus 60°C to plus 180°C. Fittings are used for permanent (major) repairs of through and part-through flaws of pipelines with a maximum internal pressure of not more than 12 MPa. Fittings are used for sealing through flaws (fistulas), for integral repair of pipelines with a pressure of up to 20 MPa. Major repairs.
Request for a quoteLLC SMARTSERVICE
Russia
Repair kit for pipelines with all accessories for mounting the sleeve and repairing the pipe. The sleeve fitting is manufactured of solid-woven reinforced fiberglass, made in a unique way, which gives a number of advantages compared to standard fittings: fire resistance, high pressure, corrosion resistance, from 30 years of operation. Scope of fitting application - pipelines, including non-metallic, underground, ground, aboveground and underwater versions, with a diameter of 50 to 1200 mm with a maximum internal working pressure of up to 20 Mpa (200 Bar) for pumping gas, oil, petroleum products and other gaseous and liquid media, operated at temperatures from minus 60°C to plus 180°C. Fittings are used for permanent (major) repairs of through and part-through flaws of pipelines with a maximum internal pressure of not more than 12 MPa. Fittings are used for sealing through flaws (fistulas), for integral repair of pipelines with a pressure of up to 20 MPa. Major repairs.
Request for a quoteResults for
Petroleum products - Import exportNumber of results
8 ProductsCompany type