Security - Import export

The searchlights LED-40/10 are intended for the security lighting of perimeter sites and grounds of different objects. The searchlights are intended for the security lighting of perimeter sites and grounds of different objects. Like all up-to-date LED light sources it assures significant energy saving and high reliability. No stroboscopic effect and collinear optics exclude flare lighting of CCTV cameras and allow to use searchlights for lighting the zones monitored by cameras. It is possible to use different operation modes, for example, full lighting mode, standby mode, switched off. Continuous light flux in all the range of power supply is resistant to low input voltage drops and have no on delay while supplying voltage. High reliability, LEDs lifetime up to 50 000 hours. Remote control via RS-485 interface allows to fade the power of light flux directly from the guard room creating its own level of lighting on the protected sector.

The searchlights LED-75/60 are intended for the security lighting of perimeter sites and grounds of different objects. The searchlights are intended for the security lighting of perimeter sites and grounds of different objects. Like all up-to-date LED light sources it assures significant energy saving and high reliability. No stroboscopic effect and collinear optics exclude flare lighting of CCTV cameras and allow to use searchlights for lighting the zones monitored by cameras. It is possible to use different operation modes, for example, full lighting mode, standby mode, switched off. Continuous light flux in all the range of power supply is resistant to low input voltage drops and have no on delay while supplying voltage. High reliability, LEDs lifetime up to 50 000 hours. Remote control via RS-485 interface allows to fade the power of light flux directly from the guard room creating its own level of lighting on the protected sector.

The microwave linear sensors FMW-300 are intended for the protection of different sites and for detecting an intruder crossing the detection zone. The sensors are intended for the protection of direct perimeter sectors. The sites include industrial facilities, airports, sites of force structure, power plants, private premises, etc. Available and effective sensor for the protection of different sites with maximum number of positive testimonials. Operation on 10,525 GHz allows to increase the width of the detection zone. Like this we make it difficult for the intruder to cross it. The easiest configuration using control units on-board of the Rx does not require high qualification of staff. Multimeter and screw driver are enough for configuration. The sensor is successfully used on outdoor perimeter sectors free from buildings and big vegetation. The sensor assures reliable protection of the site under control.

The microwave linear sensors FMW-200 are intended for the protection of different sites and for detecting an intruder crossing the detection zone. The sensors are intended for the protection of direct perimeter sectors. The sites include industrial facilities, airports, sites of force structure, power plants, private premises, etc. Available and effective sensor for the protection of different sites with maximum number of positive testimonials. Operation on 10,525 GHz allows to increase the width of the detection zone. Like this we make it difficult for the intruder to cross it. The easiest configuration using control units on-board of the Rx does not require high qualification of staff. Multimeter and screw driver are enough for configuration. The sensor is successfully used on outdoor perimeter sectors free from buildings and big vegetation. The sensor assures reliable protection of the site under control.

The microwave linear sensors FMW-100 are intended for the protection of different sites and for detecting an intruder crossing the detection zone. The sensors are intended for the protection of direct perimeter sectors. The sites include industrial facilities, airports, sites of force structure, power plants, private premises, etc. Available and effective sensor for the protection of different sites with maximum number of positive testimonials. Operation on 10,525 GHz allows to increase the width of the detection zone. Like this we make it difficult for the intruder to cross it. The easiest configuration using control units on-board of the Rx does not require high qualification of staff. Multimeter and screw driver are enough for configuration. The sensor is successfully used on outdoor perimeter sectors free from buildings and big vegetation. The sensor assures reliable protection of the site under control.

The microwave linear sensors FMW-50 are intended for the protection of different sites and for detecting an intruder crossing the detection zone. The sensors are intended for the protection of direct perimeter sectors. The sites include industrial facilities, airports, sites of force structure, power plants, private premises, etc. Available and effective sensor for the protection of different sites with maximum number of positive testimonials. Operation on 10,525 GHz allows to increase the width of the detection zone. Like this we make it difficult for the intruder to cross it. The easiest configuration using control units on-board of the Rx does not require high qualification of staff. Multimeter and screw driver are enough for configuration. The sensor is successfully used on outdoor perimeter sectors free from buildings and big vegetation. The sensor assures reliable protection of the site under control.

FORTEZA-M500 is a volumetric bi-static microwave sensor that generates an invisible detection zone between a transmitter and receiver. When an intruder crosses the detection zone, an alarm is generated. FORTEZA-M500 provides perimeter security of any object that needs protection against unauthorized intrusion from outside (industrial plants, airports, power stations, private houses, etc.) Operation on 24,15 GHz allows to: - use the sensor in many countries all over the world without getting approval for frequency use; - minimize the influence of different types of interference; - provide narrow detection zone and make it possible to use the sensors on different sites. Configuration of sensors using special software (under Windows) via USB allows to set the optimal operation mode, also remotely from the guard room via RS-485 interface. 8 frequency letters eliminate the influence of adjacent sensors. Like this it is possible to put several sensors near each other.

FORTEZA-M300 is a volumetric bi-static microwave sensor that generates an invisible detection zone between a transmitter and receiver. When an intruder crosses the detection zone, an alarm is generated. FORTEZA-M300 provides perimeter security of any object that needs protection against unauthorized intrusion from outside (industrial plants, airports, power stations, private houses, etc.) Operation on 24,15 GHz allows to: - use the sensor in many countries all over the world without getting approval for frequency use; - minimize the influence of different types of interference; - provide narrow detection zone and make it possible to use the sensors on different sites. Configuration of sensors using special software (under Windows) via USB allows to set the optimal operation mode, also remotely from the guard room via RS-485 interface. 8 frequency letters eliminate the influence of adjacent sensors. Like this it is possible to put several sensors near each other.

Light yellow, cadmium-free, special film with a matte surface in accordance with TU 22.21.30-001-13006553-2020. The number of charge and discharge cycles of phosphors is not limited within 7 years.

Principle of operation of the breakage sensor is based on the integrity control of closed perimeter line generated by a double micro wire. A very thin and imperceptible wire is stretched from the sensor’ case and fastened along to the perimeter site or the object surface, transport, doors or windows. If an intruder enters the perimeter or steals an object, he breaks the wire. Close the micro wire end by sealing it with a match or lighter flame to generate a closed perimeter line. After the switching ON the sensor goes to the stand-by mode to control the micro wire integrity. The sensor triggers at the breakage of a double micro wire. Triggering is accompanied with an intermittent sound alarm. MOSKIT-KIT is intended for the sensor transportation on a waist belt in the compact bag and has two spare cartridges. MOSKIT-KIT includes: - compact bag with the fixations on a waist belt - 1 pc. - sensor MOSKIT - 1 pc. - spare cartridges in the protective pocket - 2 pc.

Principle of operation of the breakage sensor is based on the integrity control of closed perimeter line generated by a double micro wire. A very thin and imperceptible wire is stretched from the sensor’ case and fastened along to the perimeter site or the object surface, transport, doors or windows. If an intruder enters the perimeter or steals an object, he breaks the wire. Close the micro wire end by sealing it with a match or lighter flame to generate a closed perimeter line. After the switching ON the sensor goes to the stand-by mode to control the micro wire integrity. The sensor triggers at the breakage of a double micro wire. Triggering is accompanied with an intermittent sound alarm. THE MICRO WIRE HAS A SMALL DIAMETER AND A MASKING COLOR. That’s why it is barely visible for an intruder and doesn’t provoke any efforts for a human during its breakage. The sensor MOSKIT is supplied from a built-in battery. SMALL DIMENSIONS AND WEIGHT.

FORTEZA-M100 is a volumetric bi-static microwave sensor that generates an invisible detection zone between a transmitter and receiver. When an intruder crosses the detection zone, an alarm is generated. FORTEZA-M100 provides perimeter security of any object that needs protection against unauthorized intrusion from outside (industrial plants, airports, power stations, private houses, etc.) Operation on 24,15 GHz allows to: - use the sensor in many countries all over the world without getting approval for frequency use; - minimize the influence of different types of interference; - provide narrow detection zone and make it possible to use the sensors on different sites. Configuration of sensors using special software (under Windows) via USB allows to set the optimal operation mode, also remotely from the guard room via RS-485 interface. 8 frequency letters eliminate the influence of adjacent sensors. Like this it is possible to put several sensors near each other.

FORTEZA-PERIMETER SOFTWARE is intended to control and manage TM Forteza sensors having RS-485 and other devices with NC connected via FORTEZA-ADAPTER (ТМ FORTEZA). FORTEZA-PERIMETER has an intuitive interface and doesn`t require special knowledges to work with it. Features of FORTEZA-PERIMETER Graphic representation of devices on the map. Automatic search for connected devices. Control of connected sensors and the colour indication of their status: alarm, norm and failure. Display of alarms number in the operation window for each device. Alarm reset for each sensor. Enable/Disable alarm sound. Indication of the subzone where an alarm occurred (for FM and MIR-M series). Connection of additional sound and light alarms via FORTEZA-CONTROLLER. Recording and storing of an event log, searching for events by a given filter and printing the protocol. LED security lightning brightness control. Possibility to change the logical number of devices.

The vibration sensors VIBRO-M are intended to detect deliberate destruction of metal grids or metal shields. The alarm is generated in the case of sawing, drilling or multiple beats. Vibration sensors VIBRO-M are intended for detection of destruction of physical fences. The vibration sensor VIBRO-M used for the protection of window, door or gate grids. If the surface of detection allows, it is possible in some cases to use the sensor to protect two grids welded by the metal rod, Like this we decrease expenses. Vandal-proof housing makes it impossible to dismount the sensor without opening the cover. Under the cover there is the tamper. Easy design and reliable sensors are well protected from climatic effects.

The vibration sensors VIBRO-MG are intended to detect deliberate destruction of metal grids or metal shields. The alarm is generated in the case of sawing, drilling or multiple beats. Vibration sensors VIBRO-MG are intended for detection of destruction of physical fences. The vibration sensor VIBRO-MG used for the protection of sewers, storm drains and other fences temporary flooded. If the surface of detection allows, it is possible in some cases to use the sensor to protect two grids welded by the metal rod, Like this we decrease expenses. Vandal-proof housing makes it impossible to dismount the sensor without opening the cover. Under the cover there is the tamper. Easy design and reliable sensors are well protected from climatic effects. VIBRO-MG keeps its specifications under water jets or during temporary flood.

The vibration sensors VIBRO-M are intended to detect deliberate destruction of metal grids or metal shields. The alarm is generated in the case of sawing, drilling or multiple beats. Vibration sensors VIBRO-M are intended for detection of destruction of physical fences. The vibration sensor VIBRO-M used for the protection of window, door or gate grids. If the surface of detection allows, it is possible in some cases to use the sensor to protect two grids welded by the metal rod, Like this we decrease expenses. Vandal-proof housing makes it impossible to dismount the sensor without opening the cover. Under the cover there is the tamper. Easy design and reliable sensors are well protected from climatic effects.

FORTEZA-M200 is a volumetric bi-static microwave sensor that generates an invisible detection zone between a transmitter and receiver. When an intruder crosses the detection zone, an alarm is generated. FORTEZA-M200 provides perimeter security of any object that needs protection against unauthorized intrusion from outside (industrial plants, airports, power stations, private houses, etc.) Operation on 24,15 GHz allows to: - use the sensor in many countries all over the world without getting approval for frequency use; - minimize the influence of different types of interference; - provide narrow detection zone and make it possible to use the sensors on different sites. Configuration of sensors using special software (under Windows) via USB allows to set the optimal operation mode, also remotely from the guard room via RS-485 interface. 8 frequency letters eliminate the influence of adjacent sensors. Like this it is possible to put several sensors near each other.

FORTEZA-300 is a volumetric bi-static microwave sensor that generates an invisible detection zone between a transmitter and receiver. When an intruder crosses the detection zone, an alarm is generated. FORTEZA-300 provides perimeter security of any object that needs protection against unauthorized intrusion from outside (industrial plants, airports, power stations, private houses, etc.) Operation on 24,15 GHz allows to: - use the sensor in many countries all over the world without getting approval for frequency use; - minimize the influence of different types of interference; - provide narrow detection zone and make it possible to use the sensors on different sites. Configuration of sensors using special software (under Windows) via USB allows to set the optimal operation mode, also remotely from the guard room via RS-485 interface. 4 frequency letters eliminate the influence of adjacent sensors. Like this it is possible to put several sensors near each other.

FORTEZA-200 is a volumetric bi-static microwave sensor that generates an invisible detection zone between a transmitter and receiver. When an intruder crosses the detection zone, an alarm is generated. FORTEZA-200 provides perimeter security of any object that needs protection against unauthorized intrusion from outside (industrial plants, airports, power stations, private houses, etc.) Operation on 24,15 GHz allows to: - use the sensor in many countries all over the world without getting approval for frequency use; - minimize the influence of different types of interference; - provide narrow detection zone and make it possible to use the sensors on different sites. Configuration of sensors using special software (under Windows) via USB allows to set the optimal operation mode, also remotely from the guard room via RS-485 interface. 4 frequency letters eliminate the influence of adjacent sensors. Like this it is possible to put several sensors near each other.

FORTEZA-100 is a volumetric bi-static microwave sensor that generates an invisible detection zone between a transmitter and receiver. When an intruder crosses the detection zone, an alarm is generated. FORTEZA-100 provides perimeter security of any object that needs protection against unauthorized intrusion from outside (industrial plants, airports, power stations, private houses, etc.) Operation on 24,15 GHz allows to: - use the sensor in many countries all over the world without getting approval for frequency use; - minimize the influence of different types of interference; - provide narrow detection zone and make it possible to use the sensors on different sites. Configuration of sensors using special software (under Windows) via USB allows to set the optimal operation mode, also remotely from the guard room via RS-485 interface. 4 frequency letters eliminate the influence of adjacent sensors. Like this it is possible to put several sensors near each other.

FORTEZA-50 is a volumetric bi-static microwave sensor that generates an invisible detection zone between a transmitter and receiver. When an intruder crosses the detection zone, an alarm is generated. FORTEZA-50 provides perimeter security of any object that needs protection against unauthorized intrusion from outside (industrial plants, airports, power stations, private houses, etc.) Operation on 24,15 GHz allows to: - use the sensor in many countries all over the world without getting approval for frequency use; - minimize the influence of different types of interference; - provide narrow detection zone and make it possible to use the sensors on different sites. Configuration of sensors using special software (under Windows) via USB allows to set the optimal operation mode, also remotely from the guard room via RS-485 interface. 4 frequency letters eliminate the influence of adjacent sensors. Like this it is possible to put several sensors near each other.

FORTEZA-1000 is a quickly deployable intrusion detection system intended for temporary protection of sites, small perimeters and perimeter sectors. The system can be used for protection of VIP aircrafts, critical cargo, precious machines, night parkings, military and medical camps, building facilities as well as for Border Service to detect the movement of criminal groups. Operational frequency 2,45 GHz NO DEAD ZONES NO MUTUAL INTERFERENCE OF ADJACENT SETS

Microwave bistatic sensors FORTEZA-FONAR are mounted into park lamps and combine protection and lighting functions. The sensors are intended for the protection of administrative buildings, park territories, office buildings, villas and other objects with high requirements for the territory appearance or secrecy of the alarm system. The sensors function as the alarm devices and decorative lamp. The lights can be switched on or off automatically or manually. The housing of one sensor can contain one or two receivers (or transmitters). Like this we decrease the number of devices on the territory and mounting works. Several frequency letters of the sensors allow for the sensors to operate near each other. It is possible to produce upon request the sensors FORTEZA-FONAR with a radio channel for wireless transmission of an alarm signal to a centralized monitoring console.

FORTEZA-M50 is a volumetric bi-static microwave sensor that generates an invisible detection zone between a transmitter and receiver. When an intruder crosses the detection zone, an alarm is generated. FORTEZA-M50 provides perimeter security of any object that needs protection against unauthorized intrusion from outside (industrial plants, airports, power station, private houses, etc.) Operation on 24,15 GHz allows to: - use sensor in many countries all over the world without getting approval for frequency use; - minimize the influence of different types of interference; - provide narrow detection zone and make it possible to use the sensors on different sites. Configuration of sensors using special software (under Windows) via USB allows to set the optimal operation mode, also remotely from the guard room via RS-485 interface. 8 frequency letters eliminate the influence of adjacent sensors. Like this it is possible to put several sensors near each other.

Razor Wire ; security barrier made of reinforced barbed tape. In production we use galvanized steel tape 0.45 mm , galvanized wire rope-2.3 mm, galvanized metal for fastening staples 1 mm. There are two versions: 900/100/3, 700/100/5 .

The OKO-P module is designed for individual control of work by the performer. OKO-P MODULE COMPOSITION: 1. Helmet with fastening. 2. Video camera module with flashlight and Wi-Fi transmitter. 3. Replaceable battery unit with cable.

The "OKO-M" module is designed to control the work of construction equipment (cranes, excavators) at temporary sites. Can be used as an access point for OKO-P. MODULE «OKO-M» COMPOSITION: 1. Camcorder module with microphone and Wi-Fi transmitter 2. Tripod

Smart outdoor video intercom Sputnik. We used our IT background to develop unique device to provide high level of security and comfort for any kind of condominiums. Minimum investments are needed to start work. Key features: - Low-cost (please request the details) - Free mobile application for the end users - Free web and mobile services for the monitoring and operating Provides the following functionality: - Building door lock control - Free mobile application with video-calls possibility - Observing surrounding territory - Secured Mifare key access - Keyless access by BLE and Face recognition Devices controlled by cloud-based technology through the API. This allows integration of Sputnik Devices for different services and Smart City projects.

This camera is basically used together with free Sputnik mobile application for the smart home. Together with the smart outdoor intercom Sputnik they provide incredible level of the comfort and security. Residents may observe territory and subscribe for the cloud video record.