Rj45 connectors - Import export

The NSBon-47 is a compact and cost effective Active PoE (48VDC) to Passive PoE (24VDC) converter. The input can accept any PoE that meets IEEE802.3af/at/bt standards from regular switches or injectors. The output is 24VDC Passive PoE up to 24W. Incorporating a compact, in-line design, they are perfect for outdoor use inside a weatherproof electrical enclosure. NSBon-47 can be connected to any PoE port of Industrial switch located inside outdoor access Node NSBox by RJ45 male connector. It is compatible with auto-sensing and is recognized by PoE switch as a 802.3at/af PD device. On the other side of the converter there is an RJ45 Female connector for connecting various devices powered 24VDC Passive PoE ranging from video camera, access point, and router (Ubiquiti UniFi, airMAX etc.). Pins 4,5 and 7,8 of the RJ45 Female connector are used for powering in PoE mode B. Maximum output power is 24W. NSBon-47 compatible with all 24VDC Passive PoE devices.

NSBon-15 and NSBon-14 are surge protectors keeping any IP devices with Ethernet 10/100/1000Base-T interface safe from lightning strike and other forms of electrical interference such as power surges and spikes over networking cables. The devices support PoE transmission in accordance with IEEE 802.3af/3at/3bt recommendations, regardless of the transmission method, as well as passive PoE. The NSBon-15 has eight shielded RJ45 Jacks for connecting four equipment ports. The NSBon-14 has two shielded RJ45 Jack for connecting one equipment port. These protectors utilize Gas Discharge Tubes (GDT) for each wire in RJ45 connector in order to protect all eight wires of networking cable including PoE. The “Line” sockets and the “Equipment” sockets of each port are located on different sides of the case opposite each other. There are also two contacts on the case, GND1 for connection directly to the potential equalization bus (PE) and GND2 for connection to a ground point inside the enclosure.