Electrical enclosure - Import export

NSGate electrical enclosures are designed to install outdoor Video Surveillance Systems and full protection communication equipment against both harsh environments and acts of vandalism. It is a completed product for installation and operation in any climates. The NSE-4565 enclosures are made of coated aluminum alloy in explosion-proof design, have a protection category of IP67 and ATEX-compliant. The NSBox access Nodes assembled in such enclosures can be used for outdoor and indoor installation in hazardous areas. The enclosure is corrosion resistant for long service life. The sizes of NSE-4565 enclosures are 450 x 650 x 337 mm. In the basic equipment includes wall mounting brackets, a mounting plate with DIN rails for customer equipment, terminal blocks, a two-pole circuit breaker, an electrical grounding bar, a fan with a thermostat, set of sealed cable glands for electrical and optical cables, one lock. These modules can also be included in the assembly:

NSGate electrical enclosures are designed to install outdoor Video Surveillance Systems and full protection communication equipment against both harsh environments and acts of vandalism. It is a completed product for installation and operation in any climates. The NSE-3242 enclosures are made of coated aluminum alloy in explosion-proof design, have a protection category of IP67 and ATEX-compliant. The NSBox access Nodes assembled in such enclosures can be used for outdoor and indoor installation in hazardous areas. The enclosure is corrosion resistant for long service life. The sizes of NSE-3242 enclosures are 325 x 425 x 297 mm. In the basic equipment includes wall mounting brackets, a mounting plate with DIN rails for customer equipment, terminal blocks, a two-pole circuit breaker, an electrical grounding bar, a fan with a thermostat, set of sealed cable glands for electrical and optical cables, one lock. These modules can also be included in the assembly:

NSGate electrical enclosures are designed to install outdoor Video Surveillance Systems and full protection communication equipment against both harsh environments and acts of vandalism. It is a completed product for installation and operation in any climates. The NSP-4060 enclosures are made of glass reinforced polyester and have a protection category of IP66 / NEMA4. The mounting plate material is zinc-plated sheet steel 2 mm. The enclosure is resistant to corrosion, chemicals and some acidic environments. It can be installed in environments that are constantly wet. The sizes of NSP-4060 enclosures are 400 x 600 x 230 mm. In the basic equipment includes wall mounting brackets, a mounting plate with DIN rails for customer equipment, terminal blocks, a two-pole circuit breaker, an electrical grounding bar, a fan with a thermostat, set of sealed cable glands for electrical and optical cables, one lock. These modules can also be included in the assembly:

NSGate electrical enclosures are designed to install outdoor Video Surveillance Systems and full protection communication equipment against both harsh environments and acts of vandalism. It is a completed product for installation and operation in any climates. The NSP-3040 enclosures are made of glass reinforced polyester and have a protection category of IP66 / NEMA4. The mounting plate material is zinc-plated sheet steel 2 mm. The enclosure is resistant to corrosion, chemicals and some acidic environments. It can be installed in environments that are constantly wet. The sizes of NSP-3040 enclosures are 300 x 400 x 200 mm. In the basic equipment includes wall mounting brackets, a mounting plate with DIN rails for customer equipment, terminal blocks, a two-pole circuit breaker, an electrical grounding bar, a fan with a thermostat, set of sealed cable glands for electrical and optical cables, one lock. These modules can also be included in the assembly:

NSGate electrical enclosures are designed to install outdoor Video Surveillance Systems and full protection communication equipment against both harsh environments and acts of vandalism. It is a completed product for installation and operation in any climates. The NSB-6060 enclosures are made of powder-coated sheet steel and have a protection category of IP66 / NEMA4. The mounting plate material is zinc-plated sheet steel 2 mm. The enclosure is corrosion resistant for long service life. The sizes of NSB-6060 enclosures are 600 x 600 x 210 mm. In the basic equipment includes wall mounting brackets, a mounting plate with DIN rails for customer equipment, terminal blocks, a two-pole circuit breaker, an electrical grounding bar, a fan with a thermostat, set of sealed cable glands for electrical and optical cables, one lock. These modules can also be included in the assembly: Climatic control system inside enclosure: thermostats, Fan Heater, Thermoelectric Cooler/ Assembly;

NSGate electrical enclosures are designed to install outdoor Video Surveillance Systems and full protection communication equipment against both harsh environments and acts of vandalism. It is a completed product for installation and operation in any climates. The NSB-4040 enclosures are made of powder-coated sheet steel and have a protection category of IP66 / NEMA4. The mounting plate material is zinc-plated sheet steel 2 mm. The enclosure is corrosion resistant for long service life. The sizes of NSB-4040 enclosures are 400 x 400 x 230 mm. In the basic equipment includes wall mounting brackets, a mounting plate with DIN rails for customer equipment, terminal blocks, a two-pole circuit breaker, an electrical grounding bar, a fan with a thermostat, set of sealed cable glands for electrical and optical cables, one lock. These modules can also be included in the assembly: Climatic control system inside enclosure: thermostats, Fan Heater, Thermoelectric Cooler/ Assembly;

NSGate electrical enclosures are designed to install outdoor Video Surveillance Systems and full protection communication equipment against both harsh environments and acts of vandalism. It is a completed product for installation and operation in any climates. The NSB-3860 enclosures are made of powder-coated sheet steel and have a protection category of IP66 / NEMA4. The mounting plate material is zinc-plated sheet steel 2 mm. The enclosure is corrosion resistant for long service life. The sizes of NSB-3860 enclosures are 380 x 600 x 210 mm. In the basic equipment includes wall mounting brackets, a mounting plate with DIN rails for customer equipment, terminal blocks, a two-pole circuit breaker, an electrical grounding bar, a fan with a thermostat, set of sealed cable glands for electrical and optical cables, one lock. These modules can also be included in the assembly: Climatic control system inside enclosure: thermostats, Fan Heater, Thermoelectric Cooler/ Assembly;

NSGate electrical enclosures are designed to install outdoor Video Surveillance Systems and full protection communication equipment against both harsh environments and acts of vandalism. It is a completed product for installation and operation in any climates. The NSB-3838 enclosures are made of powder-coated sheet steel and have a protection category of IP66 / NEMA4. The mounting plate material is zinc-plated sheet steel 2 mm. The enclosure is corrosion resistant for long service life. The sizes of NSB-3838 enclosures are 380 x 380 x 210 mm. In the basic equipment includes wall mounting brackets, a mounting plate with DIN rails for customer equipment, terminal blocks, a two-pole circuit breaker, an electrical grounding bar, a fan with a thermostat, set of sealed cable glands for electrical and optical cables, one lock. These modules can also be included in the assembly: Climatic control system inside enclosure: thermostats, Fan Heater, Thermoelectric Cooler/ Assembly;

NSGate electrical enclosures are designed to install outdoor Video Surveillance Systems and full protection communication equipment against both harsh environments and acts of vandalism. It is a completed product for installation and operation in any climates. The NSB-3040 enclosures are made of powder-coated sheet steel and have a protection category of IP66 / NEMA4. The mounting plate material is zinc-plated sheet steel 2 mm. The enclosure is corrosion resistant for long service life. The sizes of NSB-3040 enclosures are 300 x 400 x 210 mm. In the basic equipment includes wall mounting brackets, a mounting plate with DIN rails for customer equipment, terminal blocks, a two-pole circuit breaker, an electrical grounding bar, a fan with a thermostat, set of sealed cable glands for electrical and optical cables, one lock. These modules can also be included in the assembly: Climatic control system inside enclosure: thermostats, Fan Heater, Thermoelectric Cooler/ Assembly;

NSGate electrical enclosures are designed to install outdoor Video Surveillance Systems and full protection communication equipment against both harsh environments and acts of vandalism. It is a completed product for installation and operation in any climates. The NSB-3030 enclosures are made of powder-coated sheet steel and have a protection category of IP66 / NEMA4. The mounting plate material is zinc-plated sheet steel 2 mm. The enclosure is corrosion resistant for long service life. The sizes of NSB-3030 enclosures are 300 x 300 x 210 mm. In the basic equipment includes wall mounting brackets, a mounting plate with DIN rails for customer equipment, terminal blocks, a two-pole circuit breaker, an electrical grounding bar, a fan with a thermostat, set of sealed cable glands for electrical and optical cables, one lock. These modules can also be included in the assembly: Climatic control system inside enclosure: thermostats, Fan Heater, Thermoelectric Cooler/ Assembly;

NSGate electrical enclosures are designed to install outdoor Video Surveillance Systems and full protection communication equipment against both harsh environments and acts of vandalism. It is a completed product for installation and operation in any climates. The NSP-4040 enclosures are made of glass reinforced polyester and have a protection category of IP66 / NEMA4. The mounting plate material is zinc-plated sheet steel 2 mm. The enclosure is resistant to corrosion, chemicals and some acidic environments. It can be installed in environments that are constantly wet. The sizes of NSP-4040 enclosures are 400 x 400 x 200 mm. In the basic equipment includes wall mounting brackets, a mounting plate with DIN rails for customer equipment, terminal blocks, a two-pole circuit breaker, an electrical grounding bar, a fan with a thermostat, set of sealed cable glands for electrical and optical cables, one lock. These modules can also be included in the assembly

The NSBon-02 | NSBon-03 are rain hoods | sun shields for the NSB-xxyy | NSV-xxyy series electrical enclosures. Rain hood material is stainless steel. Designed for reliable protection for outdoor siting with water run-off to the rear. Easily retrofitted. Rain hoods are required to prevent settling and building up of liquids, corrosive solids, minerals, dust, dirt and debris on top of an electrical enclosure. If corrosive liquids and solids settle and build up on top of an electrical enclosure, the integrity of the electrical enclosure coating and material may be compromised, which may lead to corrosion and ingress of liquids and solids into the enclosure. The NSBon-02 | NSBon-03 rain hoods are an excellent choice for retrofitting onto electrical enclosures with a flat roof and we generally recommend to use it for outdoor siting.

The NSBon-01 mounting kit is designed for quick and reliable mounting of the NSB-xxyy | NSP-xxyy | NSV-xxyy | NSE-xxyy series electrical enclosures on circular or rectangular poles. The components of the mounting kit are made of zinc-plated sheet steel and stainless steel. There are two options of lengths of clamping straps, for standard diameter poles up to 190 mm and enlarged diameter up to 300 mm. In the equipment of NSBon-01 includes two mounting rails, two clamping straps, four clamping brackets and the accessories. The pole mounting kit, by default, is designed for 600 mm wide electrical enclosures. By cutting the rail to length or drilling additional holes on the cabinet, the NSBon-01 mounting kit may also be fitted to larger and smaller electrical enclosures.

Electronic equipment installed inside a cabinet emits heat, which raises the internal temperature. Over time, rising temperature can cause electronic devices to a fail. Thermoelectric Coolers or Thermoelectric Assemblies are designed to divert an excess heat from electronic equipment installed inside an electrical enclosure. NSBox-ICE is a special series of electrical enclosures with installed thermoelectric assembly. The units are mounted in various series of electrical enclosures with protection category IP66 / NEMA4: powder-coated sheet metal, glass reinforced polyester, depending on the field of application and operating conditions. The basic kit includes the selected assembly with a thermostat, a mounting plate with DIN rails for customer equipment, terminal blocks, a circuit breaker, an electrical grounding bar, the set of selected cable glands. The cable glands are mounted in the bottom of the enclosure, e.g. on a removable metal plate for sheet metal cabinet.

NSBon-04 is a plastic handle with lock system. It is designed to lock an electrical enclosure using a unique lock system and reliable protection against acts of vandalism. In the equipment includes a plastic handle with lock cylinder insert, a lock No. 3524E and two keys. The installation of the NSBon-04 option is quick and easy without any mechanical modification of the door.

The compact Fan Heater prevents the formation of condensation and provides an evenly distributed interior air temperature in electrical enclosures. It has clip for DIN Rail or Door mounting. The heating element is made on the basis of a self-regulating heating cable. The temperature of the heating element does not exceed 65°C, which ensures maximum safety and energy efficiency. The original design of the cable fastening does not allow its individual turns to touch each other, which allows maintaining the maximum heat transfer. The heater and fan are connected to the electrical circuit using two screw terminals. It is possible to separate the power circuits of the heater and the fan and use the fan together with the heater or separately in the cooling / ventilation modes of the enclosure. The NSBon-18 is suitable for the most types of junction boxes and electrical enclosures.

The NSBon-05 door-operated switch is designed to switch electrical circuits depending on the cabinet door position. The NSBon-05 switch has a build-in cable of 0.5-1 m. It may be installed inside the NSB-xxyy series electrical enclosures using NSBon-00 mounting kit. NSBon-05 switch is used : to manage lighting inside the cabinet when NSBon-06 lighting kit is used; to control the position of the cabinet door and to manage the alarm in case of unauthorized opening this door.

Thermoelectric Coolers or Thermoelectric Assemblies are designed to remove heat around critical components within an electrical enclosure with IP66 / NEMA4 protection category. These is a thermoelectric module (thermoelectric air conditioner) using the Peltier effect. The thermoelectric modules create a temperature difference between the internal and ambient heat sinks. It makes internal air colder while heat is dissipating into the external environment. Fans help the transfer of heating from the heat sinks. The main advantages of Thermoelectric Cooler over conventional compressor are: it can be controlled electronically; it is easily reversible when the current is reversed; it can work in harsh environments: in high ambient temperatures or heavily polluted ambient air; in application with vibrations or strong accelerations. Thermoelectric Coolers should be used in regions with hot climates

The NSBon-47 is a compact and cost effective Active PoE (48VDC) to Passive PoE (24VDC) converter. The input can accept any PoE that meets IEEE802.3af/at/bt standards from regular switches or injectors. The output is 24VDC Passive PoE up to 24W. Incorporating a compact, in-line design, they are perfect for outdoor use inside a weatherproof electrical enclosure. NSBon-47 can be connected to any PoE port of Industrial switch located inside outdoor access Node NSBox by RJ45 male connector. It is compatible with auto-sensing and is recognized by PoE switch as a 802.3at/af PD device. On the other side of the converter there is an RJ45 Female connector for connecting various devices powered 24VDC Passive PoE ranging from video camera, access point, and router (Ubiquiti UniFi, airMAX etc.). Pins 4,5 and 7,8 of the RJ45 Female connector are used for powering in PoE mode B. Maximum output power is 24W. NSBon-47 compatible with all 24VDC Passive PoE devices.

Thermoelectric Coolers or Thermoelectric Assemblies are designed to remove heat around critical components within an electrical enclosure with IP66 / NEMA4 protection category. These is a thermoelectric module (thermoelectric air conditioner) using the Peltier effect. The thermoelectric modules create a temperature difference between the internal and ambient heat sinks. It makes internal air colder while heat is dissipating into the external environment. Fans help the transfer of heating from the heat sinks. The main advantages of Thermoelectric Cooler over conventional compressor are: it can be controlled electronically; it is easily reversible when the current is reversed; it can work in harsh environments: in high ambient temperatures or heavily polluted ambient air; in application with vibrations or strong accelerations. Thermoelectric Coolers should be used in regions with hot climates, to extend the service life of UPS batteries

NSBon-36 is used to protect user's equipment installed into NSBox Access Node or NSB/NSE/NSP electrical enclosure with climatic control system inside from damage that can be caused by system start in low temperature conditions. The idea is not to apply power to the equipment before temperature inside the cabinet reaches acceptable level. I.e. if the temperature is lower than required by protected device's datasheet and power is applied to the entire Access node or Enclosure, the heater starts first and only after temperature rises above level set by user power is applied to the protected device. NSBon-36 consists of normally open thermostat with adjustable threshold, a contactor that is used to apply power to the user's equipment under protection and terminal blocks.

The NSBon-00 mounting kit is designed for simple and quick installation of additional accessories inside the NSB-xxyy series electrical enclosures. When using the NSBon-00 kit, no mechanical modification of the cabinet is required, for example, additional holes or opening. Additional equipment is mounted on any interior side surface of an enclosure. Installation kit material is zinc-plated sheet steel. Two rows of system perforations provide additional flexibility in the installation of various equipment. The NSBon-00 mounting kit is recommended and used to install the following accessories: Fiber Optic Distribution Frame (ODF); 24VAC power systems NSBon-31/32/33 (transformers); Door-operated switch NSBon-05; Holder for a cable hose or bundle of cables; Vertical system chassis; Additional customer equipment;

Outdoor UPS, NSBox-UPS are designed to operate in extreme environments and provide a reliable operation of outdoor video surveillance cameras, wireless monitoring and access control systems. The units are mounted in variety of electrical enclosures with protection category IP66 / NEMA4: powder-coated sheet metal, stainless steel, glass reinforced polyester, coated aluminium alloy (explosion-proof), depending on the field of application and operating conditions. With standard wall mounting or optional pole mounting kit (option NSBon-01), the installation for the NSBox-UPS is quick and easy. The basic kit includes the selected UPS-xx with a mounting kit for batteries 7Ah | 15Ah | 45Ah, a mounting plate with DIN rails for customer equipment, terminal blocks, a circuit breaker, an electrical grounding bar, a fan with a thermostat, the set of selected cable glands. The cable glands are mounted in the bottom of the enclosure, e.g. on a removable metal plate for sheet metal cabinets.