Optical fibre - Import export

The patch cord is designed to be suspended at the overhead line supports during installation of the trunk line, and to connect subscribers. Description: Optical patch cord made of DROP cable for outdoor application. Black cable jacket is resistant to temperature drops. Network construction using patch-cords: - Quick and easy installation - Minimum welding - High connection speed - Easy operation

Unit for rolling out the optical single-fiber cable d400. Designed for rolling out optical cable from the coil. Material: metal. Subscriber patch cord modular Roll-out unit d370 Ufanet. Designed for rolling out optical patch cords. Material: metal. It is installed on a hard surface Roll-out stand Cable roll-out unit for patch cords (connector 115*370) Ufanet. It is used for coils with dimensions of 290*107mm. Material: metal. Designed for installation in the ground

Optical patch cord made of DROP cable for outdoor application. Black cable jacket is resistant to temperature drops. Cable lengths are made according to customer's request. Network construction using patch-cords: - Quick and easy installation - Minimum welding - High connection speed - Easy operation - Aesthetics

It is applied as anchor fastening for trunk and subscriber optical fibre transmission lines

Fastening unit is applied as an anchoring and supporting fastener in private houses during installation of the trunk and subscriber optical fibre transmission lines. Installation: The part is fastened to the support with the mounting band (2 pcs.)

It is applied in private houses during installation of PON networks. The cabinet has 4 slots for placement – removable panel for optical crosses or optical divider cassette type (130x100x25 mm). In addition, the cabinet can accommodate up to 3 ku-1 cassettes for optical fiber welded joints.

It is applied as an anchor fastening for trunk and subscriber lines, providing offset up to 150 mm between the fixing point of the optical fibre transmission line and the support body. This fastening unit can be fitted with the "installation bracket for the optical distribution cabinet with 150 mm offset (on SV support)" for further placement of the distribution optical cabinet.

Aerial Figure 8 optical cable with a central tube with up to 48 optical wires with an integrated messenger made of FRP rod, steel strand or steel wire; with outer PE sheath. Operational temperature of the cable is from -60°С to 70°С. Minimum temperature for installation is -30°С.

Distribution optical cable with a central tube with up to 48 optical fibers, with strength members made of two steel wires, with water-blocking yarns, with an armor of corrugated steel tape and outer PE sheath. Operational temperature of the cable is from -40°С to 70°С. Minimum temperature for installation is -30°С.

Aerial optical cable with a central tube containing up to 48 optical fi bers with strength members made of two FRP rods, with outer PE sheath. Operational temperature of the cable is from -60°С to 70°С. Minimum temperature for installation is -30°С.

Aerial Figure 8 optical cable with a central strength member made of FRP rod in PE sheath or without it; tubes with up to 24 fibers each and (if necessary) fi lling dummy tubes are stranded around the central strength member; with an integrated messenger made of FRP rod, steel strand or steel wire, with outer PE sheath. Operational temperature of the cable is from -60°С to 70°С. Minimum temperature for installation is -30°С.

Distribution optical cable with a central strength member made of FRP rod, steel strand or steel wire in PE sheath (or without it); tubes with up to 24 optical fibers each and (if necessary) dummy tubes are stranded around the strength member; with a waterblocking tape, with an armor of steel corrugated tape and single or double PE sheath. Operational temperature of the cable is from -40°С to 70°С. Minimum temperature for installation is -30°С.

Indoor distribution optical cable with free access to optical fibers; the cable contains up to 24 microtubes with optical fibers; each microtube can contain up to 12 optical fibers. The microtubes are loosely laid in Low-Smoke Zero-Halogen sheath. There are two FRP rods as a strength member. Operational temperature for cables is from -10°С to 50°С. Minimum temperature for installation is -30°С.

Indoor distribution optical cable containing up to 24 microtubes with optical fiber, in each microtubes, up to 12 optical fibers; strength element (high-modulus yarns) is applied over the microtubes, sheath is Low-Smoke Zero-Halogen. Fiberglass bar or steel wire could be used as alternative strength elements. Operational temperature for cables is from -10°С to 50 ° С. Minimum temperature for installation is -10 ° C.

Indoor optical cable with a central tube containing up to 48 optical fibers, with a strength member made of steel wire and outer fire-retardant PE sheath. Operational temperature of the cable is from -40°С to 70°С. Minimum temperature for installation is -10°С.

Optical dielectric cable for backbone networks with a central loose tube containing up to 48 optical fibers, with an armor of round FRP rods and outer PE sheath. Operational temperature of the cable is from -60°С to 70°С Minimum temperature for installation is -30°С.

Indoor optical cable contains one optical fiber in Tight Buffer; around it is applied a strength member – high-modulus yarns, with an outer polymer sheath that is fire-retardant in bundle installation; Low-Smoke Zero-Halogen. Operational temperature for cables is from -10°С to 50°С. Minimum temperature for installation is -10°С.

Indoor optical cable; optical fibers are loosely laid in the center of the cable; sheath is made of fire-retardant PE Low-Smoke Zero-Halogen. There are strength members (FRP rods or steel wires) inside the sheath. Operational temperature for outdoor cables is from -60°С to 70°С. Minimum temperature for installation is -30°С.

Indoor optical cable includes two optical fibers in Tight Buffer; a strength member (high-modulus yarns) is applied over them; with outer sheath of polymer that is fi re-retardant in bundle installation Low-Smoke Zero-Halogen. Operational temperature for cables is from -10°С to 50°С. Minimum temperature for installation is -10°С.

Indoor distribution optical cable with free access to optical fibers ( up to 48 fi bers in Tight Buffer, loosely laid in Low-Smoke Zero-Halogen sheath). Strength element is two FRP rods. Operational temperature for cables is from -10°С to 50°С. Minimum temperature for installation is -10°С.

Optical cable with a central strength member made of FRP rod, steel strand or steel wire; tubes with up to 24 optical fibers and (if necessary) dummy tubes are stranded around the strength member; with PE sheath. Can be manufactured with dry water-blocking elements. Operational temperature of the cable is from -40°С to 70°С. Minimum temperature for installation is -10°С.

Optical cable for backbone networks with a central tube with up to 48 optical fibers, with an armor of round steel wire and outer PE sheath. Operational temperature of the cable is from -40°С to 70°С. Arctic version: from -60°С to 70°С. Minimum temperature for installation is -30°С.

Distribution optical cable with a central strength member made of FRP rod in PE sheath; around it are stranded tubes containing up to 24 optical fibers each, filling dummy tubes (if necessary), insulated copper conductor in outer PE sheath. Operational temperature of the cable is from -40°С to 70°С. Minimum temperature for installation is -10°С.

Optical aerial self-supporting cable, dielectric, with a central strength member made of FRP rod; tubes with up to 24 optical fibers and (if necessary filling dummy tubes) are stranded around the strength member; with strength member made of glass yarns, with single or double PE sheath. Operational temperature of the cable is from -60°С to 70° С. Minimum temperature for installation is -30°С.

Optical aerial self-supporting cable, dielectric, with a central strength member made of FRP rod; tubes with up to 24 optical fibers and (if necessary filling dummy tubes) are stranded around the strength member; with a strength member of aramid threads, with single or double PE sheath. Operational temperature of the cable is from -60°С to 70° С. Minimum temperature for installation is -30°С.