Industrial die - Import export

To dispose of waste is more and more a cost factor. Every industrial company produces a lot of general and municipal waste. With a license and an incinerator, you have a way to handle your waste problem. Be sure, incinerate municipal rubbish is an ecological, cost-effective and easy solution. In which industrial companies it is very popular Construction companies Building Chemical companies Food industry Oil and gas industry Production of raw materials Plastic industry Every kind of wood industries CBD industry Pharmaceutical industry

Incineration provides the highest destruction efficiency of waste. Slufer components and dangerous hydrocarbons from oil and gas industry, including BTEX can be incinerated, too. Our high technology constructions can achieve an efficiency of 99.9 %(DRF), depending on the materials you put in. Because of our know-how, we have automated the burning process to an optimal level with cost-economical fuel consumption. There are two kinds of incinerators: Hearth furnaces and rotary kiln. Booth are applicable in the oil and gas industry. Because of the higher sizes and quantity of disposal we recommend you to not smaller than IU-300. The best solution is IU-2000M due to its mobility and fast construction time.

Ostec offers the industrial chemistry analyzer LIOS OnLine intended for quick and safe check of processes by means of continuous onstream analysis of product’s chemical composition directly on conveyor belts or in pipelines for suspensions/liquids if such analyses are made on a real-time basis exclusive of sampling, delay in laboratory analysis and any types of hazardous radiation. LIOS OnLine analyzer will allow you to: - enhance the effectiveness and improve stability of production processes; - lower production costs of commercially useless materials removing them prior to further processing; - reduce losses in feedstock; - reduce operational costs thanks to savings in electrical energy, water and reagents due to identification of process problems at early stages; - provide your clients with quality products meeting all the requirements. Based on feedback from our customers the typical payback period of LIOS OnLine is 3-9 months only.

Multipurpose industrial IR Fourier spectrometers IROS P series are designed for routine analytical measurements in the mid-IR and near-IR region of the spectrum, in particular, qualitative and quantitative analysis of samples of organic and inorganic substances in gaseous, liquid and solid state, including films and powders. IROS P series FTIR spectrometers are based on the Michelson self-compensating interferometer which does not require dynamic adjustment and has the ability to install in the cell compartment a variety of gas and liquid cells, optical attached modules and accessories for liquid, solid and gaseous samples. Main characteristics: - Spectrometers product range with resolution up to 0.12 cm-1 - High sensitivity, rapid response - Automated measurements, easy to use - Wide range of accessories - Application software for dedicated tasks KBr/Ge/CaF2/Ge, optical windows and beamsplitter with moisture-proof coating

THE STABILIZER IMPULSE PSN380 will ensure the minimization of equipment failures, a high level of protection, a decrease in energy losses and a decrease in the downtime of critical consumers for a wide range of applications. IMPULSE PSN380 can be used not only on production lines, but also to protect equipment in cottages or offices.

ECOPAR 0.7 BAR LINE ЕСОPAR steam boilers are designed for generating lowpressure steam for purposes of production and heating supply of residential, public, and manufacturing buildings. ЕСОPAR steam boilers are seriesproduced in the range of nominal steamgenerating capacity from 0,1 to 10 tons per hour with a rated pressure of 0,7 bar (0,07 MPa) and designed for generating saturated steam with a temperature up to 120 °С according to the saturation point at the operating pressure. ЕСОPAR steam boilers are firetube with a passthrough furnace, threecourse version, with installed swirlers for enhanced performance and decreased combustion intensity. The boiler design makes it possible to maintain and clean the boiler flue and firetubes by opening the rotable parts of the front and the tailpiece of a boiler.

ЕСОPAR 10 bar steam boilers are designed for generating saturated steam with a temperature up to 185 °С. Their steamgenerating capacity varies from 0,1 to 10 tons per hour at a steam pressure to 1,0 MPa. The boilers can be used to obtain steam for technological purposes of enterprises, as well as generation of heat energy for the heating systems of residential, public, and manufacturing buildings. The steam boiler with flame inversion consists of a cylindrical furnace with wetted bottom, where flame forms and combustion products are being inverted. Flue gases enter the tube pack of the front tube plate and are sent toward the back tube plate, which they leave through the flue connection. The boiler design ensures low heating and surface loads in the combustion chamber. The boiler body consists of shell, furnace, boiler bottom and flat tube plates made of highquality steel.

ЕСОPAR 10 bar steam boilers are designed for generating saturated steam with a temperature up to 185 °С. Their steamgenerating capacity varies from 0,1 to 10 tons per hour at a steam pressure to 1,0 MPa. The boilers can be used to obtain steam for technological purposes of enterprises, as well as generation of heat energy for the heating systems of residential, public, and manufacturing buildings. The steam boiler with flame inversion consists of a cylindrical furnace with wetted bottom, where flame forms and combustion products are being inverted. Flue gases enter the tube pack of the front tube plate and are sent toward the back tube plate, which they leave through the flue connection. The boiler design ensures low heating and surface loads in the combustion chamber. The boiler body consists of shell, furnace, boiler bottom and flat tube plates made of highquality steel.

ЕСОPAR 10 bar steam boilers are designed for generating saturated steam with a temperature up to 185 °С. Their steamgenerating capacity varies from 0,1 to 10 tons per hour at a steam pressure to 1,0 MPa. The boilers can be used to obtain steam for technological purposes of enterprises, as well as generation of heat energy for the heating systems of residential, public, and manufacturing buildings. The steam boiler with flame inversion consists of a cylindrical furnace with wetted bottom, where flame forms and combustion products are being inverted. Flue gases enter the tube pack of the front tube plate and are sent toward the back tube plate, which they leave through the flue connection. The boiler design ensures low heating and surface loads in the combustion chamber. The boiler body consists of shell, furnace, boiler bottom and flat tube plates made of highquality steel.

ЕСОPAR 10 bar steam boilers are designed for generating saturated steam with a temperature up to 185 °С. Their steamgenerating capacity varies from 0,1 to 10 tons per hour at a steam pressure to 1,0 MPa. The boilers can be used to obtain steam for technological purposes of enterprises, as well as generation of heat energy for the heating systems of residential, public, and manufacturing buildings. The steam boiler with flame inversion consists of a cylindrical furnace with wetted bottom, where flame forms and combustion products are being inverted. Flue gases enter the tube pack of the front tube plate and are sent toward the back tube plate, which they leave through the flue connection. The boiler design ensures low heating and surface loads in the combustion chamber. The boiler body consists of shell, furnace, boiler bottom and flat tube plates made of highquality steel.

ЕСОPAR 10 bar steam boilers are designed for generating saturated steam with a temperature up to 185 °С. Their steamgenerating capacity varies from 0,1 to 10 tons per hour at a steam pressure to 1,0 MPa. The boilers can be used to obtain steam for technological purposes of enterprises, as well as generation of heat energy for the heating systems of residential, public, and manufacturing buildings. The steam boiler with flame inversion consists of a cylindrical furnace with wetted bottom, where flame forms and combustion products are being inverted. Flue gases enter the tube pack of the front tube plate and are sent toward the back tube plate, which they leave through the flue connection. The boiler design ensures low heating and surface loads in the combustion chamber. The boiler body consists of shell, furnace, boiler bottom and flat tube plates made of highquality steel.

ЕСОPAR 10 bar steam boilers are designed for generating saturated steam with a temperature up to 185 °С. Their steamgenerating capacity varies from 0,1 to 10 tons per hour at a steam pressure to 1,0 MPa. The boilers can be used to obtain steam for technological purposes of enterprises, as well as generation of heat energy for the heating systems of residential, public, and manufacturing buildings. The steam boiler with flame inversion consists of a cylindrical furnace with wetted bottom, where flame forms and combustion products are being inverted. Flue gases enter the tube pack of the front tube plate and are sent toward the back tube plate, which they leave through the flue connection. The boiler design ensures low heating and surface loads in the combustion chamber. The boiler body consists of shell, furnace, boiler bottom and flat tube plates made of highquality steel.

ЕСОPAR 10 bar steam boilers are designed for generating saturated steam with a temperature up to 185 °С. Their steamgenerating capacity varies from 0,1 to 10 tons per hour at a steam pressure to 1,0 MPa. The boilers can be used to obtain steam for technological purposes of enterprises, as well as generation of heat energy for the heating systems of residential, public, and manufacturing buildings. The steam boiler with flame inversion consists of a cylindrical furnace with wetted bottom, where flame forms and combustion products are being inverted. Flue gases enter the tube pack of the front tube plate and are sent toward the back tube plate, which they leave through the flue connection. The boiler design ensures low heating and surface loads in the combustion chamber. The boiler body consists of shell, furnace, boiler bottom and flat tube plates made of highquality steel.

ЕСОPAR 10 bar steam boilers are designed for generating saturated steam with a temperature up to 185 °С. Their steamgenerating capacity varies from 0,1 to 10 tons per hour at a steam pressure to 1,0 MPa. The boilers can be used to obtain steam for technological purposes of enterprises, as well as generation of heat energy for the heating systems of residential, public, and manufacturing buildings. The steam boiler with flame inversion consists of a cylindrical furnace with wetted bottom, where flame forms and combustion products are being inverted. Flue gases enter the tube pack of the front tube plate and are sent toward the back tube plate, which they leave through the flue connection. The boiler design ensures low heating and surface loads in the combustion chamber. The boiler body consists of shell, furnace, boiler bottom and flat tube plates made of highquality steel.

ЕСОPAR 10 bar steam boilers are designed for generating saturated steam with a temperature up to 185 °С. Their steamgenerating capacity varies from 0,1 to 10 tons per hour at a steam pressure to 1,0 MPa. The boilers can be used to obtain steam for technological purposes of enterprises, as well as generation of heat energy for the heating systems of residential, public, and manufacturing buildings. The steam boiler with flame inversion consists of a cylindrical furnace with wetted bottom, where flame forms and combustion products are being inverted. Flue gases enter the tube pack of the front tube plate and are sent toward the back tube plate, which they leave through the flue connection. The boiler design ensures low heating and surface loads in the combustion chamber. The boiler body consists of shell, furnace, boiler bottom and flat tube plates made of highquality steel.

ЕСОPAR 10 bar steam boilers are designed for generating saturated steam with a temperature up to 185 °С. Their steamgenerating capacity varies from 0,1 to 10 tons per hour at a steam pressure to 1,0 MPa. The boilers can be used to obtain steam for technological purposes of enterprises, as well as generation of heat energy for the heating systems of residential, public, and manufacturing buildings. The steam boiler with flame inversion consists of a cylindrical furnace with wetted bottom, where flame forms and combustion products are being inverted. Flue gases enter the tube pack of the front tube plate and are sent toward the back tube plate, which they leave through the flue connection. The boiler design ensures low heating and surface loads in the combustion chamber. The boiler body consists of shell, furnace, boiler bottom and flat tube plates made of highquality steel.

ЕСОPAR 10 bar steam boilers are designed for generating saturated steam with a temperature up to 185 °С. Their steamgenerating capacity varies from 0,1 to 10 tons per hour at a steam pressure to 1,0 MPa. The boilers can be used to obtain steam for technological purposes of enterprises, as well as generation of heat energy for the heating systems of residential, public, and manufacturing buildings. The steam boiler with flame inversion consists of a cylindrical furnace with wetted bottom, where flame forms and combustion products are being inverted. Flue gases enter the tube pack of the front tube plate and are sent toward the back tube plate, which they leave through the flue connection. The boiler design ensures low heating and surface loads in the combustion chamber. The boiler body consists of shell, furnace, boiler bottom and flat tube plates made of highquality steel.

ЕСОPAR 10 bar steam boilers are designed for generating saturated steam with a temperature up to 185 °С. Their steamgenerating capacity varies from 0,1 to 10 tons per hour at a steam pressure to 1,0 MPa. The boilers can be used to obtain steam for technological purposes of enterprises, as well as generation of heat energy for the heating systems of residential, public, and manufacturing buildings. The steam boiler with flame inversion consists of a cylindrical furnace with wetted bottom, where flame forms and combustion products are being inverted. Flue gases enter the tube pack of the front tube plate and are sent toward the back tube plate, which they leave through the flue connection. The boiler design ensures low heating and surface loads in the combustion chamber. The boiler body consists of shell, furnace, boiler bottom and flat tube plates made of highquality steel.

ЕСОPAR 10 bar steam boilers are designed for generating saturated steam with a temperature up to 185 °С. Their steamgenerating capacity varies from 0,1 to 10 tons per hour at a steam pressure to 1,0 MPa. The boilers can be used to obtain steam for technological purposes of enterprises, as well as generation of heat energy for the heating systems of residential, public, and manufacturing buildings. The steam boiler with flame inversion consists of a cylindrical furnace with wetted bottom, where flame forms and combustion products are being inverted. Flue gases enter the tube pack of the front tube plate and are sent toward the back tube plate, which they leave through the flue connection. The boiler design ensures low heating and surface loads in the combustion chamber. The boiler body consists of shell, furnace, boiler bottom and flat tube plates made of highquality steel.

ЕСОPAR 10 bar steam boilers are designed for generating saturated steam with a temperature up to 185 °С. Their steamgenerating capacity varies from 0,1 to 10 tons per hour at a steam pressure to 1,0 MPa. The boilers can be used to obtain steam for technological purposes of enterprises, as well as generation of heat energy for the heating systems of residential, public, and manufacturing buildings. The steam boiler with flame inversion consists of a cylindrical furnace with wetted bottom, where flame forms and combustion products are being inverted. Flue gases enter the tube pack of the front tube plate and are sent toward the back tube plate, which they leave through the flue connection. The boiler design ensures low heating and surface loads in the combustion chamber. The boiler body consists of shell, furnace, boiler bottom and flat tube plates made of highquality steel.

ЕСОPAR 10 bar steam boilers are designed for generating saturated steam with a temperature up to 185 °С. Their steamgenerating capacity varies from 0,1 to 10 tons per hour at a steam pressure to 1,0 MPa. The boilers can be used to obtain steam for technological purposes of enterprises, as well as generation of heat energy for the heating systems of residential, public, and manufacturing buildings. The steam boiler with flame inversion consists of a cylindrical furnace with wetted bottom, where flame forms and combustion products are being inverted. Flue gases enter the tube pack of the front tube plate and are sent toward the back tube plate, which they leave through the flue connection. The boiler design ensures low heating and surface loads in the combustion chamber. The boiler body consists of shell, furnace, boiler bottom and flat tube plates made of highquality steel.

ECOPAR 0.7 BAR LINE ЕСОPAR steam boilers are designed for generating lowpressure steam for purposes of production and heating supply of residential, public, and manufacturing buildings. ЕСОPAR steam boilers are seriesproduced in the range of nominal steamgenerating capacity from 0,1 to 10 tons per hour with a rated pressure of 0,7 bar (0,07 MPa) and designed for generating saturated steam with a temperature up to 120 °С according to the saturation point at the operating pressure. ЕСОPAR steam boilers are firetube with a passthrough furnace, threecourse version, with installed swirlers for enhanced performance and decreased combustion intensity. The boiler design makes it possible to maintain and clean the boiler flue and firetubes by opening the rotable parts of the front and the tailpiece of a boiler.

ECOPAR 0.7 BAR LINE ЕСОPAR steam boilers are designed for generating lowpressure steam for purposes of production and heating supply of residential, public, and manufacturing buildings. ЕСОPAR steam boilers are seriesproduced in the range of nominal steamgenerating capacity from 0,1 to 10 tons per hour with a rated pressure of 0,7 bar (0,07 MPa) and designed for generating saturated steam with a temperature up to 120 °С according to the saturation point at the operating pressure. ЕСОPAR steam boilers are firetube with a passthrough furnace, threecourse version, with installed swirlers for enhanced performance and decreased combustion intensity. The boiler design makes it possible to maintain and clean the boiler flue and firetubes by opening the rotable parts of the front and the tailpiece of a boiler.

ECOPAR 0.7 BAR LINE ЕСОPAR steam boilers are designed for generating lowpressure steam for purposes of production and heating supply of residential, public, and manufacturing buildings. ЕСОPAR steam boilers are seriesproduced in the range of nominal steamgenerating capacity from 0,1 to 10 tons per hour with a rated pressure of 0,7 bar (0,07 MPa) and designed for generating saturated steam with a temperature up to 120 °С according to the saturation point at the operating pressure. ЕСОPAR steam boilers are firetube with a passthrough furnace, threecourse version, with installed swirlers for enhanced performance and decreased combustion intensity. The boiler design makes it possible to maintain and clean the boiler flue and firetubes by opening the rotable parts of the front and the tailpiece of a boiler.

ECOPAR 0.7 BAR LINE ЕСОPAR steam boilers are designed for generating lowpressure steam for purposes of production and heating supply of residential, public, and manufacturing buildings. ЕСОPAR steam boilers are seriesproduced in the range of nominal steamgenerating capacity from 0,1 to 10 tons per hour with a rated pressure of 0,7 bar (0,07 MPa) and designed for generating saturated steam with a temperature up to 120 °С according to the saturation point at the operating pressure. ЕСОPAR steam boilers are firetube with a passthrough furnace, threecourse version, with installed swirlers for enhanced performance and decreased combustion intensity. The boiler design makes it possible to maintain and clean the boiler flue and firetubes by opening the rotable parts of the front and the tailpiece of a boiler.

ECOPAR 0.7 BAR LINE ЕСОPAR steam boilers are designed for generating lowpressure steam for purposes of production and heating supply of residential, public, and manufacturing buildings. ЕСОPAR steam boilers are seriesproduced in the range of nominal steamgenerating capacity from 0,1 to 10 tons per hour with a rated pressure of 0,7 bar (0,07 MPa) and designed for generating saturated steam with a temperature up to 120 °С according to the saturation point at the operating pressure. ЕСОPAR steam boilers are firetube with a passthrough furnace, threecourse version, with installed swirlers for enhanced performance and decreased combustion intensity. The boiler design makes it possible to maintain and clean the boiler flue and firetubes by opening the rotable parts of the front and the tailpiece of a boiler.

ECOPAR 0.7 BAR LINE ЕСОPAR steam boilers are designed for generating lowpressure steam for purposes of production and heating supply of residential, public, and manufacturing buildings. ЕСОPAR steam boilers are seriesproduced in the range of nominal steamgenerating capacity from 0,1 to 10 tons per hour with a rated pressure of 0,7 bar (0,07 MPa) and designed for generating saturated steam with a temperature up to 120 °С according to the saturation point at the operating pressure. ЕСОPAR steam boilers are firetube with a passthrough furnace, threecourse version, with installed swirlers for enhanced performance and decreased combustion intensity. The boiler design makes it possible to maintain and clean the boiler flue and firetubes by opening the rotable parts of the front and the tailpiece of a boiler.

ECOPAR 0.7 BAR LINE ЕСОPAR steam boilers are designed for generating lowpressure steam for purposes of production and heating supply of residential, public, and manufacturing buildings. ЕСОPAR steam boilers are seriesproduced in the range of nominal steamgenerating capacity from 0,1 to 10 tons per hour with a rated pressure of 0,7 bar (0,07 MPa) and designed for generating saturated steam with a temperature up to 120 °С according to the saturation point at the operating pressure. ЕСОPAR steam boilers are firetube with a passthrough furnace, threecourse version, with installed swirlers for enhanced performance and decreased combustion intensity. The boiler design makes it possible to maintain and clean the boiler flue and firetubes by opening the rotable parts of the front and the tailpiece of a boiler.

ECOPAR 0.7 BAR LINE ЕСОPAR steam boilers are designed for generating lowpressure steam for purposes of production and heating supply of residential, public, and manufacturing buildings. ЕСОPAR steam boilers are seriesproduced in the range of nominal steamgenerating capacity from 0,1 to 10 tons per hour with a rated pressure of 0,7 bar (0,07 MPa) and designed for generating saturated steam with a temperature up to 120 °С according to the saturation point at the operating pressure. ЕСОPAR steam boilers are firetube with a passthrough furnace, threecourse version, with installed swirlers for enhanced performance and decreased combustion intensity. The boiler design makes it possible to maintain and clean the boiler flue and firetubes by opening the rotable parts of the front and the tailpiece of a boiler.