El microwave - Import export

The microwave linear sensors FMW-100 are intended for the protection of different sites and for detecting an intruder crossing the detection zone. The sensors are intended for the protection of direct perimeter sectors. The sites include industrial facilities, airports, sites of force structure, power plants, private premises, etc. Available and effective sensor for the protection of different sites with maximum number of positive testimonials. Operation on 10,525 GHz allows to increase the width of the detection zone. Like this we make it difficult for the intruder to cross it. The easiest configuration using control units on-board of the Rx does not require high qualification of staff. Multimeter and screw driver are enough for configuration. The sensor is successfully used on outdoor perimeter sectors free from buildings and big vegetation. The sensor assures reliable protection of the site under control.

The microwave linear sensors FMW-300 are intended for the protection of different sites and for detecting an intruder crossing the detection zone. The sensors are intended for the protection of direct perimeter sectors. The sites include industrial facilities, airports, sites of force structure, power plants, private premises, etc. Available and effective sensor for the protection of different sites with maximum number of positive testimonials. Operation on 10,525 GHz allows to increase the width of the detection zone. Like this we make it difficult for the intruder to cross it. The easiest configuration using control units on-board of the Rx does not require high qualification of staff. Multimeter and screw driver are enough for configuration. The sensor is successfully used on outdoor perimeter sectors free from buildings and big vegetation. The sensor assures reliable protection of the site under control.

FM-60-C (Curtain) is a volumetric monostatic microwave sensor intended for protection of separate perimeter sectors where it is difficult or impossible to use bistatic devices, e.x. blind alleys, marshlands, ravines, stock areas, tunnels, viaducts, etc. FM-60-C (Curtain) detection zone is divided into 12 subzones which can be set up separately. One or several sub zones can be disconnected. Disconnecting the sub zones we can provide «secured» passages on the protected site for free moving of people through the checkpoint and free moving of transport through the gates. In order to increase the interference immunity we recommend to disconnect the sub zones where detection is not required. THE SENSORS CAN BE CONFIGURED: -by laptop (OC Windows) via USB on-site; -by tablet or smartphone (OC Android) via Bluetooth or USB on-site; -by computer connected via Ethernet; -remotely from the security post via RS-485. The sensors FM-60-C (Curtain) have 5 frequency letters.

FM-60-F (Fan) is a volumetric monostatic microwave sensor intended for protection of separate perimeter sectors where it is difficult or impossible to use bistatic devices, e.x. blind alleys, marshlands, ravines, stock areas, tunnels, viaducts, etc. FM-60-F (Fan) detection zone is divided into 12 subzones which can be set up separately. One or several sub zones can be disconnected. Disconnecting the sub zones we can provide «secured» passages on the protected site for free moving of people through the checkpoint and free moving of transport through the gates. In order to increase the interference immunity we recommend to disconnect the sub zones where detection is not required. THE SENSORS CAN BE CONFIGURED: -by laptop (OC Windows) via USB on-site; -by tablet or smartphone (OC Android) via Bluetooth or USB on-site; -by computer connected via Ethernet; -remotely from the security post via RS-485. The sensors FM-60-F (Fan) have 5 frequency letters.

FM-30(24)-V (Volume) is a volumetric monostatic microwave sensor intended for protection of separate perimeter sectors where it is difficult or impossible to use bistatic devices, e.x. blind alleys, marshlands, ravines, stock areas, tunnels, viaducts, etc. FM-30(24)-V (Volume) detection zone is divided into 12 subzones which can be set up separately. One or several sub zones can be disconnected. Disconnecting the sub zones we can provide «secured» passages on the protected site for free moving of people through the checkpoint and free moving of transport through the gates. In order to increase the interference immunity we recommend to disconnect the sub zones where detection is not required. THE SENSORS CAN BE CONFIGURED: -by laptop (OC Windows) via USB on-site; -by tablet or smartphone (OC Android) via Bluetooth or USB on-site; -by computer connected via Ethernet; -remotely from the security post via RS-485. The sensors FM-30(24)-V (Volume) have 5 frequency letters.

FM-60(24) is a volumetric monostatic microwave sensor intended for protection of separate perimeter sectors where it is difficult or impossible to use bistatic devices, e.x. blind alleys, marshlands, ravines, stock areas, tunnels, viaducts, etc. FM-60(24) detection zone is divided into 12 subzones which can be set up separately. One or several sub zones can be disconnected. Disconnecting the sub zones we can provide «secured» passages on the protected site for free moving of people through the checkpoint and free moving of transport through the gates. In order to increase the interference immunity we recommend to disconnect the sub zones where detection is not required. THE SENSORS CAN BE CONFIGURED: -by laptop (OC Windows) via USB on-site; -by tablet or smartphone (OC Android) via Bluetooth or USB on-site; -by computer connected via Ethernet; -remotely from the security post via RS-485. The sensors FM-60(24) have 5 frequency letters.

FM-30 is a volumetric monostatic microwave sensor intended for protection of separate perimeter sectors where it is difficult or impossible to use bistatic devices, e.x. blind alleys, marshlands, ravines, stock areas, tunnels, viaducts, etc. FM-30 detection zone is divided into 12 subzones which can be set up separately. One or several sub zones can be disconnected. Disconnecting the sub zones we can provide «secured» passages on the protected site for free moving of people through the checkpoint and free moving of transport through the gates. In order to increase the interference immunity we recommend to disconnect the sub zones where detection is not required. THE SENSORS CAN BE CONFIGURED: -by laptop (OC Windows) via USB on-site; -by tablet or smartphone (OC Android) via Bluetooth or USB on-site; -by computer connected via Ethernet; -remotely from the security post via RS-485. The sensors FM-30 have 5 frequency letters.

FM-30(24)-С (Curtain) is a volumetric monostatic microwave sensor intended for protection of separate perimeter sectors where it is difficult or impossible to use bistatic devices, e.x. blind alleys, marshlands, ravines, stock areas, tunnels, viaducts, etc. FM-30(24)-С (Curtain) detection zone is divided into 12 subzones which can be set up separately. One or several sub zones can be disconnected. Disconnecting the sub zones we can provide «secured» passages on the protected site for free moving of people through the checkpoint and free moving of transport through the gates. In order to increase the interference immunity we recommend to disconnect the sub zones where detection is not required. THE SENSORS CAN BE CONFIGURED: -by laptop (OC Windows) via USB on-site; -by tablet or smartphone (OC Android) via Bluetooth or USB on-site; -by computer connected via Ethernet; -remotely from the security post via RS-485. The sensors FM-30(24)-С (Curtain) have 5 frequency letters.

FM-42(24) is a volumetric monostatic microwave sensor intended for protection of separate perimeter sectors where it is difficult or impossible to use bistatic devices, e.x. blind alleys, marshlands, ravines, stock areas, tunnels, viaducts, etc. FM-42(24) detection zone is divided into 12 subzones which can be set up separately. One or several sub zones can be disconnected. Disconnecting the sub zones we can provide «secured» passages on the protected site for free moving of people through the checkpoint and free moving of transport through the gates. In order to increase the interference immunity we recommend to disconnect the sub zones where detection is not required. THE SENSORS CAN BE CONFIGURED: -by laptop (OC Windows) via USB on-site; -by tablet or smartphone (OC Android) via Bluetooth or USB on-site; -by computer connected via Ethernet; -remotely from the security post via RS-485. The sensors FM-42(24) have 5 frequency letters.

FM-60-V (Volume) is a volumetric monostatic microwave sensor intended for protection of separate perimeter sectors where it is difficult or impossible to use bistatic devices, e.x. blind alleys, marshlands, ravines, stock areas, tunnels, viaducts, etc. FM-60-V (Volume) detection zone is divided into 12 subzones which can be set up separately. One or several sub zones can be disconnected. Disconnecting the sub zones we can provide «secured» passages on the protected site for free moving of people through the checkpoint and free moving of transport through the gates. In order to increase the interference immunity we recommend to disconnect the sub zones where detection is not required. THE SENSORS CAN BE CONFIGURED: -by laptop (OC Windows) via USB on-site; -by tablet or smartphone (OC Android) via Bluetooth or USB on-site; -by computer connected via Ethernet; -remotely from the security post via RS-485. The sensors FM-60-V (Volume) have 5 frequency letters.

The microwave linear sensors FMW-200 are intended for the protection of different sites and for detecting an intruder crossing the detection zone. The sensors are intended for the protection of direct perimeter sectors. The sites include industrial facilities, airports, sites of force structure, power plants, private premises, etc. Available and effective sensor for the protection of different sites with maximum number of positive testimonials. Operation on 10,525 GHz allows to increase the width of the detection zone. Like this we make it difficult for the intruder to cross it. The easiest configuration using control units on-board of the Rx does not require high qualification of staff. Multimeter and screw driver are enough for configuration. The sensor is successfully used on outdoor perimeter sectors free from buildings and big vegetation. The sensor assures reliable protection of the site under control.

FORTEZA-200 is a volumetric bi-static microwave sensor that generates an invisible detection zone between a transmitter and receiver. When an intruder crosses the detection zone, an alarm is generated. FORTEZA-200 provides perimeter security of any object that needs protection against unauthorized intrusion from outside (industrial plants, airports, power stations, private houses, etc.) Operation on 24,15 GHz allows to: - use the sensor in many countries all over the world without getting approval for frequency use; - minimize the influence of different types of interference; - provide narrow detection zone and make it possible to use the sensors on different sites. Configuration of sensors using special software (under Windows) via USB allows to set the optimal operation mode, also remotely from the guard room via RS-485 interface. 4 frequency letters eliminate the influence of adjacent sensors. Like this it is possible to put several sensors near each other.

FORTEZA-100 is a volumetric bi-static microwave sensor that generates an invisible detection zone between a transmitter and receiver. When an intruder crosses the detection zone, an alarm is generated. FORTEZA-100 provides perimeter security of any object that needs protection against unauthorized intrusion from outside (industrial plants, airports, power stations, private houses, etc.) Operation on 24,15 GHz allows to: - use the sensor in many countries all over the world without getting approval for frequency use; - minimize the influence of different types of interference; - provide narrow detection zone and make it possible to use the sensors on different sites. Configuration of sensors using special software (under Windows) via USB allows to set the optimal operation mode, also remotely from the guard room via RS-485 interface. 4 frequency letters eliminate the influence of adjacent sensors. Like this it is possible to put several sensors near each other.

FORTEZA-M100 is a volumetric bi-static microwave sensor that generates an invisible detection zone between a transmitter and receiver. When an intruder crosses the detection zone, an alarm is generated. FORTEZA-M100 provides perimeter security of any object that needs protection against unauthorized intrusion from outside (industrial plants, airports, power stations, private houses, etc.) Operation on 24,15 GHz allows to: - use the sensor in many countries all over the world without getting approval for frequency use; - minimize the influence of different types of interference; - provide narrow detection zone and make it possible to use the sensors on different sites. Configuration of sensors using special software (under Windows) via USB allows to set the optimal operation mode, also remotely from the guard room via RS-485 interface. 8 frequency letters eliminate the influence of adjacent sensors. Like this it is possible to put several sensors near each other.

The microwave linear sensors FMW-50 are intended for the protection of different sites and for detecting an intruder crossing the detection zone. The sensors are intended for the protection of direct perimeter sectors. The sites include industrial facilities, airports, sites of force structure, power plants, private premises, etc. Available and effective sensor for the protection of different sites with maximum number of positive testimonials. Operation on 10,525 GHz allows to increase the width of the detection zone. Like this we make it difficult for the intruder to cross it. The easiest configuration using control units on-board of the Rx does not require high qualification of staff. Multimeter and screw driver are enough for configuration. The sensor is successfully used on outdoor perimeter sectors free from buildings and big vegetation. The sensor assures reliable protection of the site under control.

FORTEZA-50 is a volumetric bi-static microwave sensor that generates an invisible detection zone between a transmitter and receiver. When an intruder crosses the detection zone, an alarm is generated. FORTEZA-50 provides perimeter security of any object that needs protection against unauthorized intrusion from outside (industrial plants, airports, power stations, private houses, etc.) Operation on 24,15 GHz allows to: - use the sensor in many countries all over the world without getting approval for frequency use; - minimize the influence of different types of interference; - provide narrow detection zone and make it possible to use the sensors on different sites. Configuration of sensors using special software (under Windows) via USB allows to set the optimal operation mode, also remotely from the guard room via RS-485 interface. 4 frequency letters eliminate the influence of adjacent sensors. Like this it is possible to put several sensors near each other.

Microwave bistatic sensors FORTEZA-FONAR are mounted into park lamps and combine protection and lighting functions. The sensors are intended for the protection of administrative buildings, park territories, office buildings, villas and other objects with high requirements for the territory appearance or secrecy of the alarm system. The sensors function as the alarm devices and decorative lamp. The lights can be switched on or off automatically or manually. The housing of one sensor can contain one or two receivers (or transmitters). Like this we decrease the number of devices on the territory and mounting works. Several frequency letters of the sensors allow for the sensors to operate near each other. It is possible to produce upon request the sensors FORTEZA-FONAR with a radio channel for wireless transmission of an alarm signal to a centralized monitoring console.

FORTEZA-M500 is a volumetric bi-static microwave sensor that generates an invisible detection zone between a transmitter and receiver. When an intruder crosses the detection zone, an alarm is generated. FORTEZA-M500 provides perimeter security of any object that needs protection against unauthorized intrusion from outside (industrial plants, airports, power stations, private houses, etc.) Operation on 24,15 GHz allows to: - use the sensor in many countries all over the world without getting approval for frequency use; - minimize the influence of different types of interference; - provide narrow detection zone and make it possible to use the sensors on different sites. Configuration of sensors using special software (under Windows) via USB allows to set the optimal operation mode, also remotely from the guard room via RS-485 interface. 8 frequency letters eliminate the influence of adjacent sensors. Like this it is possible to put several sensors near each other.

FORTEZA-M300 is a volumetric bi-static microwave sensor that generates an invisible detection zone between a transmitter and receiver. When an intruder crosses the detection zone, an alarm is generated. FORTEZA-M300 provides perimeter security of any object that needs protection against unauthorized intrusion from outside (industrial plants, airports, power stations, private houses, etc.) Operation on 24,15 GHz allows to: - use the sensor in many countries all over the world without getting approval for frequency use; - minimize the influence of different types of interference; - provide narrow detection zone and make it possible to use the sensors on different sites. Configuration of sensors using special software (under Windows) via USB allows to set the optimal operation mode, also remotely from the guard room via RS-485 interface. 8 frequency letters eliminate the influence of adjacent sensors. Like this it is possible to put several sensors near each other.

FORTEZA-50 is a volumetric bi-static microwave sensor that generates an invisible detection zone between a transmitter and receiver. When an intruder crosses the detection zone, an alarm is generated. FORTEZA-50 provides perimeter security of any object that needs protection against unauthorized intrusion from outside (industrial plants, airports, power stations, private houses, etc.) Operation on 24,15 GHz allows to: - use the sensor in many countries all over the world without getting approval for frequency use; - minimize the influence of different types of interference; - provide narrow detection zone and make it possible to use the sensors on different sites. Configuration of sensors using special software (under Windows) via USB allows to set the optimal operation mode, also remotely from the guard room via RS-485 interface. 4 frequency letters eliminate the influence of adjacent sensors. Like this it is possible to put several sensors near each other.

FORTEZA-300 is a volumetric bi-static microwave sensor that generates an invisible detection zone between a transmitter and receiver. When an intruder crosses the detection zone, an alarm is generated. FORTEZA-300 provides perimeter security of any object that needs protection against unauthorized intrusion from outside (industrial plants, airports, power stations, private houses, etc.) Operation on 24,15 GHz allows to: - use the sensor in many countries all over the world without getting approval for frequency use; - minimize the influence of different types of interference; - provide narrow detection zone and make it possible to use the sensors on different sites. Configuration of sensors using special software (under Windows) via USB allows to set the optimal operation mode, also remotely from the guard room via RS-485 interface. 4 frequency letters eliminate the influence of adjacent sensors. Like this it is possible to put several sensors near each other.

FORTEZA-M200 is a volumetric bi-static microwave sensor that generates an invisible detection zone between a transmitter and receiver. When an intruder crosses the detection zone, an alarm is generated. FORTEZA-M200 provides perimeter security of any object that needs protection against unauthorized intrusion from outside (industrial plants, airports, power stations, private houses, etc.) Operation on 24,15 GHz allows to: - use the sensor in many countries all over the world without getting approval for frequency use; - minimize the influence of different types of interference; - provide narrow detection zone and make it possible to use the sensors on different sites. Configuration of sensors using special software (under Windows) via USB allows to set the optimal operation mode, also remotely from the guard room via RS-485 interface. 8 frequency letters eliminate the influence of adjacent sensors. Like this it is possible to put several sensors near each other.

Pr-l-210x148C4 is a container made of PP(polypropylene) with 4 sections and is used for sushi or other ready-to eat meals. Microwaveable.