Results for
GELTEK-MEDICA LTD
Russia
A universal contact medium for physiotherapy, electrical myostimulation, and lymphatic drainage.
Request for a quoteGELTEK-MEDICA LTD
Russia
A gel for ultrasound transmissions, Doppler sonography, physiotherapy and cosmetology. Features lower viscosity than Mediagel of High Viscosity. Effective for all types of transmissions. The gel serves as an effective contact medium for ultrasound transmission and therapy when using domestic or imported equipment. The gel is applied directly to the transducer or the patient's body, is easy to spread over the skin, does not smear, and dries up slowly, ensuring a lasting sliding effect and a full contact between the transducer and the patient's body. After completing the transmission, the gel is easily removed with a tissue or rinsed off with water. The gel does not stain clothes, cause allergy or damage the transducers, and is water-soluble.
Request for a quoteGELTEK-MEDICA LTD
Russia
Gel for ultrasound transmissions and therapy. Contains Aloe Vera latex. Used for patients with tender, sensitive skin, for transvaginal and endorectal sonographic transmissions, as well as in laser cosmetology. It has an anti-inflammatory effect, moistens the skin, and improves the condition of the skin and the mucous membrane. When performing ultrasound transmissions, the gel is applied directly to the transducer or the patient's body, is easy to spread over the skin, does not smear, and dries up slowly, ensuring a lasting sliding effect and a full contact between the transducer and the patient's body. After completing the transmission, the gel is easily removed with a tissue or rinsed off with water. The gel does not stain clothes, cause allergy or damage the transducers, and is water-soluble.
Request for a quoteGELTEK-MEDICA LTD
Russia
Dry Gel Concentrate. Used to prepare gel for ultrasound scanning. Contains two components: polymeric powder and neutralizing agent. The gel is easily prepared in laboratory environment using distilled water. One pack of dry concentrate (30 g) can be used to prepare 2.5-3 kg of high viscosity gel. It can be easily transported to distant regions.
Request for a quoteGELTEK-MEDICA LTD
Russia
Essential for ultrasound transmissions that require sterility: transesophageal echocardiography, ultrasound-controlled surgical treatments, including invasive procedures, transmissions of patients with damaged skin, gynecological transmissions and other cases requiring sterility.
Request for a quoteGELTEK-MEDICA LTD
Russia
A gel for ultrasound transmissions, Doppler sonography, physiotherapy and cosmetology. Features lower viscosity than Mediagel of High Viscosity. Effective for all types of transmissions. The gel is also used in laser cosmetology. The gel serves as an effective contact medium for ultrasound transmission and therapy when using domestic or imported equipment. The gel is applied directly to the transducer or the patient's body, is easy to spread over the skin, does not smear, and dries up slowly, ensuring a lasting sliding effect and a full contact between the transducer and the patient's body. After completing the transmission, the gel is easily removed with a tissue or rinsed off with water. The gel does not stain clothes, cause allergy or damage the transducers, and is water-soluble.
Request for a quoteGELTEK-MEDICA LTD
Russia
A universal gel for ultrasound transmission, Doppler sonography and therapy. Recommended for all procedures requiring a viscous gel. Recommended by the Russian Association of Ultrasound Diagnostic Specialists in Medicine, it is one of the best gels for ultrasound transmission and therapy on the Russian market, featuring world-class quality. The gel serves as an effective contact medium for ultrasound transmission and therapy when using domestic or imported equipment. The gel is applied directly to the transducer or the patient's body, is easy to spread over the skin, does not smear, and dries up slowly, ensuring a lasting sliding effect and a full contact between the transducer and the patient's body. After completing the transmission, the gel is easily removed with a tissue or rinsed off with water. The gel does not stain clothes, cause allergy or damage the transducers, and is water-soluble.
Request for a quoteGELTEK-MEDICA LTD
Russia
A universal gel for ultrasound transmission, Doppler sonography and therapy. Recommended for all procedures requiring a viscous gel. This colorless gel is also used in laser cosmetology. The gel serves as an effective contact medium for ultrasound transmission and therapy when using domestic or imported equipment. The gel is applied directly to the transducer or the patient's body, is easy to spread over the skin, does not smear, and dries up slowly, ensuring a lasting sliding effect and a full contact between the transducer and the patient's body. After completing the transmission, the gel is easily removed with a tissue or rinsed off with water. The gel does not stain clothes, cause allergy or damage the transducers, and is water-soluble.
Request for a quoteOSTEC ARTTOOL LIMITED COMPANY
Russia
LIOS 500N is a modern powerful instrument that incorporates innovative technologies in spectroscopy, lasers, and software enabling unique measurements of chemical elements in a sample as well as 2D, 3D elemental mapping, and in-depth profiling. The most convenient and efficient analytical technique of choice for a wide range of applications. Main advantages: - Universality (no need to restart the instrument while analyzing different materials) - Easy and fast analysis (little to no sample preparation) - Highest analytical flexibility (variations in a sample shape and size may be infinite) - High-Speed Analysis - Wide range of concentrations (from ppm to tens of percent) - High accuracy measurements and stability - Low cost of a single analysis, minimum consumables The optical layout offers the ability to make analysis of chemical composition in a small area of inhomogeneous samples, provides elemental mapping and layer-by-layer analysis.
Request for a quoteOSTEC ARTTOOL LIMITED COMPANY
Russia
Ostec offers the industrial chemistry analyzer LIOS OnLine intended for quick and safe check of processes by means of continuous onstream analysis of product’s chemical composition directly on conveyor belts or in pipelines for suspensions/liquids if such analyses are made on a real-time basis exclusive of sampling, delay in laboratory analysis and any types of hazardous radiation. LIOS OnLine analyzer will allow you to: - enhance the effectiveness and improve stability of production processes; - lower production costs of commercially useless materials removing them prior to further processing; - reduce losses in feedstock; - reduce operational costs thanks to savings in electrical energy, water and reagents due to identification of process problems at early stages; - provide your clients with quality products meeting all the requirements. Based on feedback from our customers the typical payback period of LIOS OnLine is 3-9 months only.
Request for a quoteOSTEC ARTTOOL LIMITED COMPANY
Russia
FiPOS product line from Ostec & art photonics GmbH is a cluster of innovative fiber optic probes and fiber probe couplers designed for inline analytical analysis in a wide spectral range from UV to MidIR (550 cmˉ¹ to 55 550 cmˉ¹). FiPOS family of immersion fiber probes includes ATR, transmission, transflection, fluorescent, and diffuse reflection probes all compatible with any FTMIR, FTNIR or dispersion spectrometer, process photometer, IRLED, or QCL spectral sensor to use inline for PAT applications. FiPOS Fiber Probe Couplers (FPC) couple any FTIR spectrometer with various fiber optic probes and upgrade it to eliminate sampling and to run reaction monitoring inline. Our fiber probe couplers provide high coupling efficiency for ATR – absorption, transmission, or reflection process spectroscopy in a wide spectral range from UV to MidIR to use fiber-coupled FTIR not only with LNcooled MCT detectors but with TEcooled MCT and uncooled IR detectors as well.
Request for a quoteOSTEC ARTTOOL LIMITED COMPANY
Russia
IROS 03 Fourier infrared spectrometer is designed to record absorption spectra of solid, liquid, and gaseous substances in the near and medium IR region (including drugs, varnishes and paints, oil products, pharmaceuticals, polymer films, and fibers) with their subsequent identification, as well as for qualitative and quantitative analysis of mixtures containing several components. Main Advantages: - Unique misalignment-free, humidity and temperature change resistant Double Cat’s Eye interferometer - Sealed drainable optical unit - The ability to expand the spectral range using additional radiation sources, detectors and beam splitters - Three ports for connecting external devices - Great variety of extension modules IROS 03 FTIR Spectrometer can be equipped with a large number of extension modules. It makes possible to use IROS 03 for different common and specific applications.
Request for a quoteOSTEC ARTTOOL LIMITED COMPANY
Russia
IROS 05i is a special FTIR spectrometer designed for work in harsh conditions. This model allows solving a wide range of industrial problems, including process control, with the possibility of online (in situ) monitoring of industrial processes (in reactors or pipelines) both for laboratories and industry facilities. Features: - Completely tight metal case - Ports for connecting external cooler and purging with inert gases to protect and stabilize the optical unit in difficult environmental conditions - Module for connecting fiber optic probes (up to 2 simultaneously) Advantages: - Ability to connect 2 probes, allows working with the device in 2-channel mode, monitoring simultaneously processes taking place in 2 different reaction environments - Control software allows setting flexible routines with continuous analysis and evaluation of data obtained in real-time - Wide range of probes designed for use in corrosive environments, at high pressures and temperature, among others
Request for a quoteOSTEC ARTTOOL LIMITED COMPANY
Russia
IROS 05 FTIR spectrometer is designed to provide a wide range of sample measurement techniques in the most challenging environments, from the scientific laboratory to the industrial production line. Compact size, reasonable price, a unique set of accessories and high performance – these advantages of IROS 05 spectrometer allow it to fit most of research and field tasks as a midlevel spectrometer for academic and industrial applications. Features: - A wide array of functions due to various attached modules and detectors - Capability of additional external devices connection for IR spectrum registration - Stability to temperature fluctuation and vibration due to unique patented interferometer design - Humidity resistance because of ZnSe optics - Spectrum recording control buttons on device case for fast routine operations - Compact and light-weight IROS 05 can be combined with wide-range IR microscope IR M series and FiPOS ATR fiber probes.
Request for a quoteOSTEC ARTTOOL LIMITED COMPANY
Russia
Application areas: - health care - drug discovery - pharmacy - environmental monitoring - forensic science - homeland security Technical performance: - patented design is a combination of a multifunctional sample introduction and ionization system, drift tube ion mobility spectrometer and sector TOF mass spectrometer with orthogonal acceleration - Multifunction sample introduction and ionization system works with both integrated ion sources and external available engineering solutions. Integrated ionization platform allows to use electrospray (ESI), atmosphere pressure chemical ionization (APCI), atmosphere pressure photoionization (APPI) - high resolution ion mobility spectrometer provides maximum selectivity compared to existing commercial instruments Main advantages: - allows to reach better sensitivity than approaches based on orthogonal acceleration reflectron TOF analyzers - allows to analyze gases and liquids much faster than liquid chromatography/mass spectrometry
Request for a quoteOSTEC ARTTOOL LIMITED COMPANY
Russia
MaOS HiSpec. High resolving power drift tube ion mobility spectrometer Application areas: - Health care - Drug discovery - Pharmacy - Environmental monitoring - Explosives detection - Forensic science - Biotechnology Main advantages: - Improved selectivity thanks to twice increased resolving power - Possibility to apply different ionization methods - Integrated technical solution for combination with different separation techniques
Request for a quoteOSTEC ARTTOOL LIMITED COMPANY
Russia
Multipurpose industrial IR Fourier spectrometers IROS P series are designed for routine analytical measurements in the mid-IR and near-IR region of the spectrum, in particular, qualitative and quantitative analysis of samples of organic and inorganic substances in gaseous, liquid and solid state, including films and powders. IROS P series FTIR spectrometers are based on the Michelson self-compensating interferometer which does not require dynamic adjustment and has the ability to install in the cell compartment a variety of gas and liquid cells, optical attached modules and accessories for liquid, solid and gaseous samples. Main characteristics: - Spectrometers product range with resolution up to 0.12 cm-1 - High sensitivity, rapid response - Automated measurements, easy to use - Wide range of accessories - Application software for dedicated tasks KBr/Ge/CaF2/Ge, optical windows and beamsplitter with moisture-proof coating
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
NT-MDT LLC
Russia
The new digital controller PX Ultra turns your routine SPM device into easytouse instrument for scientific breakthroughs and advanced research The controller has 5 lockins amplifiers for uponelevel multitechnique leading edge measurements. The up to 5 MHz bandwidth for use of HF cantilevers and high harmonic oscillations’ action for the advanced investigation of electrical and mechanical properties at nanoscale. Lownoise piezoscanner control affords carrying out research by the same scanning element in the range from nanometers to tens and hundreds of micrometers.Ease of upgrade and functional extension of controller due to convenient slot organization. Regularly updated software. LabView compatibility for users’ custom applications. HybriD Mode™compatible.Fully automated adjustment for defined measuring mode. Digital and analogue peripheral ports. Ask online support service.
Request for a quoteMAX EQUIPMENT, LLC
Russia
A true professional is critical of own equipment and tools. Manicurists often face the fact that their arm stands quickly deteriorate they fade, crack or just peel off. Sometimes it comes to the fact that showing a recently bought roller to the client is embarrassing. MAX manicure rollers are made of high quality eco leather. The material retains its properties for a long time and is quite resistant to abrasion. Each roller is made by hand. MAX rollers are pleasant to the touch and serve for a long time, delighting the nail artists with their appearance. Add a roller to the order right now!
Request for a quoteMAX EQUIPMENT, LLC
Russia
A nail dust collector for a true professional? Of course, the built-in MAX Ultimate VII! Super powerful. Stylish. Comfortable. An ideal choice for nail artists with a permanent workplace. Main features of the model: Super powerful fan. Up to 5.2 times more powerful than the one of a conventional nail dust collector. The suction power does not drop over time. The fan blades are protected by the MAX Safe+ grid. The fall of a nail file or other foreign objects, when using a conventional nail dust collector, threatens you with damage of the engine – the most expensive part of the nail dust collector. With MAX Ultimate you will not be afraid of this problem. It is equipped with a double protective grid: its outer part is made of aviation aluminum, while the inner part is a reliable metal frame which does not allow pushing the structure inside. Convenient system for switching on the device. The product is certified. The nail dust collector has 2 certificates confirming the quality.
Request for a quoteMAX EQUIPMENT, LLC
Russia
A nail dust collector for a true professional? Of course, the built-in MAX Ultimate VII! Super powerful. Stylish. Comfortable. An ideal choice for nail artists with a permanent workplace. Main features of the model: Super powerful fan. Up to 5.2 times more powerful than the one of a conventional nail dust collector. The suction power does not drop over time. The fan blades are protected by the MAX Safe+ grid. The fall of a nail file or other foreign objects, when using a conventional nail dust collector, threatens you with damage of the engine – the most expensive part of the nail dust collector. With MAX Ultimate you will not be afraid of this problem. It is equipped with a double protective grid: its outer part is made of aviation aluminum, while the inner part is a reliable metal frame which does not allow pushing the structure inside. Convenient system for switching on the device. The product is certified. The nail dust collector has 2 certificates confirming the quality.
Request for a quoteMAX EQUIPMENT, LLC
Russia
A nail dust collector for a true professional? Of course, the built-in MAX Ultimate VII! Super powerful. Stylish. Comfortable. An ideal choice for nail artists with a permanent workplace. Main features of the model: Super powerful fan. Up to 5.2 times more powerful than the one of a conventional nail dust collector. The suction power does not drop over time. The fan blades are protected by the MAX Safe+ grid. The fall of a nail file or other foreign objects, when using a conventional nail dust collector, threatens you with damage of the engine – the most expensive part of the nail dust collector. With MAX Ultimate you will not be afraid of this problem. It is equipped with a double protective grid: its outer part is made of aviation aluminum, while the inner part is a reliable metal frame which does not allow pushing the structure inside. Convenient system for switching on the device. The product is certified. The nail dust collector has 2 certificates confirming the quality.
Request for a quoteMAX EQUIPMENT, LLC
Russia
The truly powerful MAX Ultimate VII. Equipped with a unique proprietary fan. This is amazing! Imagine that you have just finished doing a nail correction for a client, and the table is clean. No more masks, sawdust on a wet napkin and other tricks. You just work clean. Do you like the feeling? Then the choice is obvious. Order your MAX Ultimate VII right now! Super fan Ultimate VII. Not just powerful, but special. Designed specifically for a manicure nail dust collector. The number of impeller blades is 9. A record among analogues! The blades become thinner towards the impeller edge. The effect is that the fan sucks in the dust-air mixture better. The powerful electric motor is located outside the fan housing. The effect: a more powerful fan can be inserted in a housing of the same size. Special design of the fan housing. This made it possible to remove the gap between the fan walls and the impeller, which any conventional fan has. Certified product.
Request for a quoteMAX EQUIPMENT, LLC
Russia
The truly powerful MAX Ultimate VII. Equipped with a unique proprietary fan. This is amazing! Imagine that you have just finished doing a nail correction for a client, and the table is clean. No more masks, sawdust on a wet napkin and other tricks. You just work clean. Do you like the feeling? Then the choice is obvious. Order your MAX Ultimate VII right now! Super fan Ultimate VII. Not just powerful, but special. Designed specifically for a manicure nail dust collector. The number of impeller blades is 9. A record among analogues! The blades become thinner towards the impeller edge. The effect is that the fan sucks in the dust-air mixture better. The powerful electric motor is located outside the fan housing. The effect: a more powerful fan can be inserted in a housing of the same size. Special design of the fan housing. This made it possible to remove the gap between the fan walls and the impeller, which any conventional fan has. Certified product.
Request for a quoteMAX EQUIPMENT, LLC
Russia
The truly powerful MAX Ultimate VII. Equipped with a unique proprietary fan. This is amazing! Imagine that you have just finished doing a nail correction for a client, and the table is clean. No more masks, sawdust on a wet napkin and other tricks. You just work clean. Do you like the feeling? Then the choice is obvious. Order your MAX Ultimate VII right now! Super fan Ultimate VII. Not just powerful, but special. Designed specifically for a manicure nail dust collector. The number of impeller blades is 9. A record among analogues! The blades become thinner towards the impeller edge. The effect is that the fan sucks in the dust-air mixture better. The powerful electric motor is located outside the fan housing. The effect: a more powerful fan can be inserted in a housing of the same size. Special design of the fan housing. This made it possible to remove the gap between the fan walls and the impeller, which any conventional fan has. Certified product.
Request for a quoteNT-MDT LLC
Russia
IR s‑SNOM microscopy and spectroscopy with 10 nm spatial resolution Wide spectral range of operation 312 μm Incredibly low thermal drift and high signal stability Versatile AFM with advanced modes SRI (conductivity), KPFM (surface potential), SCM (capacitance), MFM (magnetic properties), PFM (piezoelectric forces) HybriD Mode™ quantitative nanomechanical mapping Integration with microRaman (optional) The ability of s‑SNOM measurements in the visible spectral range (optional) NTMDT Spectrum Instruments presents NTEGRA Nano IR scattering scanning nearfield optical microscope (s‑SNOM) designed for infrared (IR) spectral range. AFM probe is located in the focus of optical system which excites sample structure by IR laser and collects the optical response. Collected light is directed to Michelson interferometer for optical analysis.
Request for a quoteNT-MDT LLC
Russia
Scanning Thermal Microscopy (SThM) is an advanced SPM mode intended for simultaneous obtaining nanoscale thermal and topography images. NTMDT’s SThM kit is able to visualize temperature and thermal conductivity distribution at the sample surface. The SThM system hardware includes electronic controller, software, and probes. SThM mode of operation with an AFM requires a specialized probe with a resistor built into the cantilever. NTMDT’s SThM module allows one to monitor the resistance changes correlated with the temperature at the end of the probe. So the system is able to monitor relative changes of sample temperature and thermal conductivity. NTMDT’s thermal probes provide better than 100 nm lateral resolution for both topography and thermal images. The specialized SThM cantilever, made of SiO2 with a thin metal layer, is deposited on the probe in such a way that the highest resistance portion of the layer is concentrated near the tip apex.
Request for a quoteMAX EQUIPMENT, LLC
Russia
MAX Storm 4. A dream for an entrylevel nail artist. This nail dust collector is perfect for an entrylevel nail artist and a professional who rarely works with gel and acryl. Main features of the model Convenient in work, strong casing. The nail dust collector casing is convenient both for the nail artist and the client. It does not bend and is resistant to disinfectants. The casing material is heavyduty plastic. Working on it is convenient and not cold even in winter, which compares it favorably with metal counterparts. The nail dust collector does not slip on the table. Thanks to special rubber legs, it is securely fixed on the tabletop. This makes working with the nail dust collector especially comfortable.
Request for a quoteResults for
Instruments - Import exportNumber of results
59 ProductsCompany type
Category