Fire safety - Import export

Specifications: - capacity up to 3000-8000 m3/hour - water consumption 0.3-0.5 1/s - pressure up to 100 atm. Execution: chassis, container, marine Application: - the fighting - localization of emissions - protection against thermal radiation - cleaning surfaces from contamination - fighting forest fires - deposition of smoke and toxic chemicals - elimination of icing - vapor-drip curtain - provision of temporary or emergency heat supply of residential buildings - sanitization (including Covid-19)

Fipron-Cord — innovative independent fire extinguishing mean compound of composite materials. It represents a mix of microcapsules with an inner heating agent. When exposed to fire, a heating agent in a cord enables followed by a chemical reaction through the whole length of cord. Such reaction comes with heat impact that leads to explosion of all microcapsules and release fire heating substance. Fipron Cord product can be installed together with a high voltage electric cable in closed cable ducts located both indoors and outdoors with an operating temperature from minus 50 ° C to plus 80 ° C.

Sheets made of photoluminescent light-accumulating film FES-24. Suitable for making evacuation plans, fire safety signs, photoluminescent screens for fire extinguishers.

Sheets made of photoluminescent light-accumulating film FES-24P. Suitable for making evacuation plans, fire safety signs, photoluminescent screens for fire extinguishers.

Sheets made of photoluminescent light-accumulating film FES-24. Size of one sheet of A2 610 by 410 mm Suitable for making evacuation plans, fire safety signs, photoluminescent screens for fire extinguishers.

Sheets made of photoluminescent light-accumulating film FES-24. The size of one sheet of A3 format (305 by 410 mm). Suitable for making evacuation plans, fire safety signs, photoluminescent screens for fire extinguishers.

Photoluminescent light-accumulating opaque film FES-24. Light yellow, cadmium-free, special film with a matte surface in accordance with TU 22.21.30-001-13006553-2020. The number of charge and discharge cycles of phosphors is not limited within 7 years. This film is intended for direct printing, cutting into ribbons, sheets. It is produced in rolls of 50 meters long and 0.61 meters wide. Released in rolls, in one roll not less than 30.5 sq.m. Suitable for the production of evacuation plans, fire safety signs, photoluminescent screens for fire extinguishers, FES line marking tapes.

Transparent photoluminescent light-accumulating film FES-24P. Three-layer light yellow, cadmium-free, special polyvinyl chloride film with a glossy surface in accordance with TU 22.21.30-001-13006553-2020. The number of charge and discharge cycles of phosphors is not limited within 7 years. This film is intended for application over the finished product (lamination). It is produced in rolls of 50 meters long and 0.61 meters wide. One roll contains at least 30.5 square meters. Suitable for the production of evacuation plans, fire safety signs, photoluminescent screens for fire extinguishers, line marking tapes.

Cable tray Unicor applied for laying trunk and subscribers cable lines. Its specific feature is absence of the cover, cable lines are laid via the duct slot. The cable tray has technological parts for fixing it to the wall. The cable tray has the Fire Safety Certificate.

UPS series MINI are designed for uninterruptible power supply of critical loads with high power density server and network equipment, voice and data networks, medical equipment and entrylevel industrial installations. The MINI series is a new generation of UPS with double conversion (online) topology and fully digital control, which provides a high level of protection for the continuous operation of the connected load, which prevents costly downtime. In keeping with high fire safety requirements, the MINI series IMPULSE UPS enclosures are made of impactresistant, fireresistant ABS plastic. This inherently ensures the shock resistance and fire safety of the electrical protection equipment.

UPS IMPULSE series SLIM 5004200 VA is a series of highly efficient, reliable and affordable UPS lineinteractive topology with sinusoidal output signal. Thanks to the builtin AVR voltage stabilizer, all models of the SLIM series maintain the output voltage within the normal range at undervoltage or overvoltage of the mains, optimally using the battery resource. This allows not only to provide guaranteed stable backup power in case of voltage loss in the incoming network, but also to protect critical equipment from damage that may result from voltage surges. Following the high requirements of fire safety, the enclosures of the IMPULSE UPS of the SLIM series are made of impactresistant ABS plastic with fireresistant properties. This inherently ensures the shock resistance and fire safety of the electrical protection equipment.

UPS IMPULSE JUNIOR series are compact, reliable and affordable UPSs for computers that not only provide backup power in the event of a power failure, but also protect PCs and workstations from damage caused by power surges. Thanks to the builtin AVR voltage regulator, all models of the JUNIOR series maintain the output voltage within the normal range at undervoltage or overvoltage of the mains, optimally using the battery resource. Following the high requirements of fire safety, the enclosures of the IMPULSE UPS of the JUNIOR SMART series are made of impactresistant ABS plastic with fireresistant properties. This inherently ensures the shock resistance and fire safety of the electrical protection equipment.

UPS IMPULSE JUNIOR series are compact, reliable and affordable UPSs for computers that not only provide backup power in the event of a power failure, but also protect PCs and workstations from damage caused by power surges. Thanks to the builtin AVR voltage regulator, all models of the JUNIOR series maintain the output voltage within the normal range at undervoltage or overvoltage of the mains, optimally using the battery resource. In keeping with the high fire safety requirements, the JUNIOR series IMPULSE UPS enclosures are made of impactresistant ABS plastic with fireresistant properties. This inherently ensures the shock resistance and fire safety of the electrical protection equipment.

SmartCity Bin 120 is a street waste compacting bin with fill-level measurement system, operating on sustainable solar power. It is an automatic urban trash container for outdoor use, supplied with solar panel, built-in compactor, fill-level measurement system based on innovative algorithm Equipped with air pressure, humidity, temperature and air quality sensors. Galvanized steel vandalproof housing, separate locks on each door, hands safety sensor and fire detection system with smart firefight algorithm stand for high safety standards. Stylish NB-IoT automatic garbage bins, supplied with advanced controlling and energy safe algorithms and real time data transfer – the face of smart city street landscape!

Fire Safety Cabinet in compliance with EN 14470-1 with 90 minutes fire resistance intended for indoor storage of flammable products. - Double welded carcass made from 1 - 1.5 mm thickness steel sheet and insulation panel of between the walls. Insulation material is fiber glass fleece coated gypsum board. Outer carcass is coated with epoxy resin powder. Inner carcass is paneled with high quality melamine impregnated medium-density fiberboard, which is resistant to acid and corrosive vapors. - If the temperature rises up to 70±10˚C, the doors and ventilation ducts are automatically closed while thermal expanding strip around the door's perimeter makes the inner content of the cabinet completely sealed off. - Cylinder lock for each door - Removable bottom sump for spilled liquids - Ø 100 mm air inlet and exhaust air ducts for whether natural ventilation or connection with forced ventilation/filtration systems - Feet adjustment level. - Ground loop

Fire Safety Cabinet in compliance with EN 14470-1 with 90 minutes fire resistance intended for indoor storage of flammable products. - Double welded carcass made from 1 - 1.5 mm thickness steel sheet and insulation panel of between the walls. Insulation material is fiber glass fleece coated gypsum board. Outer carcass is coated with epoxy resin powder. Inner carcass is paneled with high quality melamine impregnated medium-density fiberboard, which is resistant to acid and corrosive vapors. - If the temperature rises up to 70±10˚C, the doors and ventilation ducts are automatically closed while thermal expanding strip around the door's perimeter makes the inner content of the cabinet completely sealed off. - Cylinder lock for each door - Removable bottom sump for spilled liquids - Ø 100 mm air inlet and exhaust air ducts for whether natural ventilation or connection with forced ventilation/filtration systems - Feet adjustment level. - Ground loop

A fire certificate is a document issued by a certification body in the field of fire safety confirming that the products comply with the requirements of technical regulations and, if applicable, the requirements of fire safety standards.