Electrical design - Import export

ТОРУС-200 is a modern welding inverter device based on a digital high-frequency mains voltage transducer. The device is designed for electric arc welding of low-carbon, alloy and stainless steels, it can operate in TIG and MMA modes. Obtaining high-quality welding joints does not require high qualifications from the employee, which is important for novice welders. In short-circuit mode, the device almost does not consume current, which allows it to be powered from petrol power units with a capacity of 4 kW (6 kVA) and a household network with slumps up to 165 V. ТОРУС-200, like other inverter welding machines of the ТОРУС line, allows you to get welding with stable parameters. It is characterized by: small weight – 5 kg, high performance factor and the ability to work with electrodes with a thickness from 1.6 to 5 millimeters. In addition, the ТОРУС-200 welding inverter is designed for continuous operation not only indoors, but also outdoors.

NSGate electrical enclosures are designed to install outdoor Video Surveillance Systems and full protection communication equipment against both harsh environments and acts of vandalism. It is a completed product for installation and operation in any climates. The NSB-3030 enclosures are made of powder-coated sheet steel and have a protection category of IP66 / NEMA4. The mounting plate material is zinc-plated sheet steel 2 mm. The enclosure is corrosion resistant for long service life. The sizes of NSB-3030 enclosures are 300 x 300 x 210 mm. In the basic equipment includes wall mounting brackets, a mounting plate with DIN rails for customer equipment, terminal blocks, a two-pole circuit breaker, an electrical grounding bar, a fan with a thermostat, set of sealed cable glands for electrical and optical cables, one lock. These modules can also be included in the assembly: Climatic control system inside enclosure: thermostats, Fan Heater, Thermoelectric Cooler/ Assembly;

NSGate electrical enclosures are designed to install outdoor Video Surveillance Systems and full protection communication equipment against both harsh environments and acts of vandalism. It is a completed product for installation and operation in any climates. The NSB-3860 enclosures are made of powder-coated sheet steel and have a protection category of IP66 / NEMA4. The mounting plate material is zinc-plated sheet steel 2 mm. The enclosure is corrosion resistant for long service life. The sizes of NSB-3860 enclosures are 380 x 600 x 210 mm. In the basic equipment includes wall mounting brackets, a mounting plate with DIN rails for customer equipment, terminal blocks, a two-pole circuit breaker, an electrical grounding bar, a fan with a thermostat, set of sealed cable glands for electrical and optical cables, one lock. These modules can also be included in the assembly: Climatic control system inside enclosure: thermostats, Fan Heater, Thermoelectric Cooler/ Assembly;

The NSBon-05 door-operated switch is designed to switch electrical circuits depending on the cabinet door position. The NSBon-05 switch has a build-in cable of 0.5-1 m. It may be installed inside the NSB-xxyy series electrical enclosures using NSBon-00 mounting kit. NSBon-05 switch is used : to manage lighting inside the cabinet when NSBon-06 lighting kit is used; to control the position of the cabinet door and to manage the alarm in case of unauthorized opening this door.

NSGate electrical enclosures are designed to install outdoor Video Surveillance Systems and full protection communication equipment against both harsh environments and acts of vandalism. It is a completed product for installation and operation in any climates. The NSP-4060 enclosures are made of glass reinforced polyester and have a protection category of IP66 / NEMA4. The mounting plate material is zinc-plated sheet steel 2 mm. The enclosure is resistant to corrosion, chemicals and some acidic environments. It can be installed in environments that are constantly wet. The sizes of NSP-4060 enclosures are 400 x 600 x 230 mm. In the basic equipment includes wall mounting brackets, a mounting plate with DIN rails for customer equipment, terminal blocks, a two-pole circuit breaker, an electrical grounding bar, a fan with a thermostat, set of sealed cable glands for electrical and optical cables, one lock. These modules can also be included in the assembly:

NSGate electrical enclosures are designed to install outdoor Video Surveillance Systems and full protection communication equipment against both harsh environments and acts of vandalism. It is a completed product for installation and operation in any climates. The NSB-6060 enclosures are made of powder-coated sheet steel and have a protection category of IP66 / NEMA4. The mounting plate material is zinc-plated sheet steel 2 mm. The enclosure is corrosion resistant for long service life. The sizes of NSB-6060 enclosures are 600 x 600 x 210 mm. In the basic equipment includes wall mounting brackets, a mounting plate with DIN rails for customer equipment, terminal blocks, a two-pole circuit breaker, an electrical grounding bar, a fan with a thermostat, set of sealed cable glands for electrical and optical cables, one lock. These modules can also be included in the assembly: Climatic control system inside enclosure: thermostats, Fan Heater, Thermoelectric Cooler/ Assembly;

NSGate electrical enclosures are designed to install outdoor Video Surveillance Systems and full protection communication equipment against both harsh environments and acts of vandalism. It is a completed product for installation and operation in any climates. The NSB-3838 enclosures are made of powder-coated sheet steel and have a protection category of IP66 / NEMA4. The mounting plate material is zinc-plated sheet steel 2 mm. The enclosure is corrosion resistant for long service life. The sizes of NSB-3838 enclosures are 380 x 380 x 210 mm. In the basic equipment includes wall mounting brackets, a mounting plate with DIN rails for customer equipment, terminal blocks, a two-pole circuit breaker, an electrical grounding bar, a fan with a thermostat, set of sealed cable glands for electrical and optical cables, one lock. These modules can also be included in the assembly: Climatic control system inside enclosure: thermostats, Fan Heater, Thermoelectric Cooler/ Assembly;

NSGate electrical enclosures are designed to install outdoor Video Surveillance Systems and full protection communication equipment against both harsh environments and acts of vandalism. It is a completed product for installation and operation in any climates. The NSB-3040 enclosures are made of powder-coated sheet steel and have a protection category of IP66 / NEMA4. The mounting plate material is zinc-plated sheet steel 2 mm. The enclosure is corrosion resistant for long service life. The sizes of NSB-3040 enclosures are 300 x 400 x 210 mm. In the basic equipment includes wall mounting brackets, a mounting plate with DIN rails for customer equipment, terminal blocks, a two-pole circuit breaker, an electrical grounding bar, a fan with a thermostat, set of sealed cable glands for electrical and optical cables, one lock. These modules can also be included in the assembly: Climatic control system inside enclosure: thermostats, Fan Heater, Thermoelectric Cooler/ Assembly;

Magnetic couplings are used as transmission mechanisms in modern pumps, which makes it possible to obtain a qualitatively new 100% tight device without making essential changes to the design of the electric drive and the wet end of the pump. At present Villina offers GNVC, GNGC and GNVC-P series vertical, horizontal and semi-submersible centrifugal pumps with magnetic couplings, designed for pumping explosive and flammable, toxic and corrosive fluids (petroleum products, alkalis, acids, alcohols, etc). PURPOSE Magnetic couplings for Villina centrifugal pumps allow for transmission of torque from the electric motor to the pump shaft using magnetic fields generated by permanent magnets instead of mechanical engagement devices. At the same time, there is no need to withdraw the shaft from the pump wet end to the drive device, therefore the wet end can be made in the form of a completely sealed system free of leaks which are typical for pumps with mechanical shaft seals.

The design of an electric pump section is similar to the design of a standard vertical electric pump with a GNVC series magnetic coupling, which allows for the use of already proven technical solutions: impeller blades with curved surfaces create an angle of attack and partially allow for switching to the laminar mode of wall-adjacent flow on their surface and provide more efficient deflection of liquid to the periphery; a closed type impeller has a higher efficiency and longer service life compared to open and semi-closed impellers; bell-type fit of the impeller on the pump shaft precisely keeps the geometric position of the impeller with respect to the guide vanes; the vertical position of the shaft resting on a heavy-duty carrying cushion in the vertical plane, and sleeve type bearings in the horizontal plane help prevent sagging of the shaft, as for instance, in the horizontal design of the pump, and play and runout; the use of sleeve type bearings

NSGate electrical enclosures are designed to install outdoor Video Surveillance Systems and full protection communication equipment against both harsh environments and acts of vandalism. It is a completed product for installation and operation in any climates. The NSB-4040 enclosures are made of powder-coated sheet steel and have a protection category of IP66 / NEMA4. The mounting plate material is zinc-plated sheet steel 2 mm. The enclosure is corrosion resistant for long service life. The sizes of NSB-4040 enclosures are 400 x 400 x 230 mm. In the basic equipment includes wall mounting brackets, a mounting plate with DIN rails for customer equipment, terminal blocks, a two-pole circuit breaker, an electrical grounding bar, a fan with a thermostat, set of sealed cable glands for electrical and optical cables, one lock. These modules can also be included in the assembly: Climatic control system inside enclosure: thermostats, Fan Heater, Thermoelectric Cooler/ Assembly;

NSGate electrical enclosures are designed to install outdoor Video Surveillance Systems and full protection communication equipment against both harsh environments and acts of vandalism. It is a completed product for installation and operation in any climates. The NSP-3040 enclosures are made of glass reinforced polyester and have a protection category of IP66 / NEMA4. The mounting plate material is zinc-plated sheet steel 2 mm. The enclosure is resistant to corrosion, chemicals and some acidic environments. It can be installed in environments that are constantly wet. The sizes of NSP-3040 enclosures are 300 x 400 x 200 mm. In the basic equipment includes wall mounting brackets, a mounting plate with DIN rails for customer equipment, terminal blocks, a two-pole circuit breaker, an electrical grounding bar, a fan with a thermostat, set of sealed cable glands for electrical and optical cables, one lock. These modules can also be included in the assembly:

NSGate electrical enclosures are designed to install outdoor Video Surveillance Systems and full protection communication equipment against both harsh environments and acts of vandalism. It is a completed product for installation and operation in any climates. The NSE-3242 enclosures are made of coated aluminum alloy in explosion-proof design, have a protection category of IP67 and ATEX-compliant. The NSBox access Nodes assembled in such enclosures can be used for outdoor and indoor installation in hazardous areas. The enclosure is corrosion resistant for long service life. The sizes of NSE-3242 enclosures are 325 x 425 x 297 mm. In the basic equipment includes wall mounting brackets, a mounting plate with DIN rails for customer equipment, terminal blocks, a two-pole circuit breaker, an electrical grounding bar, a fan with a thermostat, set of sealed cable glands for electrical and optical cables, one lock. These modules can also be included in the assembly:

NSGate electrical enclosures are designed to install outdoor Video Surveillance Systems and full protection communication equipment against both harsh environments and acts of vandalism. It is a completed product for installation and operation in any climates. The NSE-4565 enclosures are made of coated aluminum alloy in explosion-proof design, have a protection category of IP67 and ATEX-compliant. The NSBox access Nodes assembled in such enclosures can be used for outdoor and indoor installation in hazardous areas. The enclosure is corrosion resistant for long service life. The sizes of NSE-4565 enclosures are 450 x 650 x 337 mm. In the basic equipment includes wall mounting brackets, a mounting plate with DIN rails for customer equipment, terminal blocks, a two-pole circuit breaker, an electrical grounding bar, a fan with a thermostat, set of sealed cable glands for electrical and optical cables, one lock. These modules can also be included in the assembly: