Electric drives - Import export

Load capacity: up to 300 kg Burning rate: Up to 110 kg/h Waste type: medical, bioorganic, solid household waste Dimensions (without funnel, m (HхLхW): 1,23х1,95х1,9 Weight, kg: 1500 Possibility to deliver mobile version: yes DESIGNED FOR ROUND-THE-CLOCK OPERATION! ADDITIONAL EQUIPMENT: ♦ Gas/heavy oil burners ♦ Scoop clamshell ♦ Supplementary air feed system ♦ Waste dumping device ♦ Fuel tank + filters ♦ Electric generator ♦ Semi-trailer Electric drive

Load capacity: up to 400 kg Burning rate: Up to 50 kg/h Waste type: medical, bioorganic, solid household waste Dimensions (without funnel, m (HхLхW): 1,23х1,95х1,9 Weight, kg: 1500 Possibility to deliver mobile version: yes DESIGNED FOR ROUND-THE-CLOCK OPERATION! ADDITIONAL EQUIPMENT: ♦ Gas/heavy oil burners ♦ Scoop clamshell ♦ Supplementary air feed system ♦ Waste dumping device ♦ Fuel tank + filters ♦ Electric generator ♦ Semi-trailer Electric drive

Load capacity: up to 500 kg Burning rate: Up to 80 kg/h Waste type: medical, bioorganic, solid household waste Dimensions (without funnel, m (HхLхW): 1,5х3,13х1,8 Weight, kg: 2000 Possibility to deliver mobile version: yes DESIGNED FOR ROUND-THE-CLOCK OPERATION! ADDITIONAL EQUIPMENT: ♦ Gas/heavy oil burners ♦ Scoop clamshell ♦ Supplementary air feed system ♦ Waste dumping device ♦ Fuel tank + filters ♦ Electric generator ♦ Semi-trailer Electric drive

Load capacity: up to 750 kg Burning rate: Up to 100 / 120 kg/h Waste type: medical, bioorganic, solid household waste Dimensions (without funnel, m (HхLхW): 2,36х2,43х2,66 / 2,5х3,1х1,95 Weight, kg: 3400 / 3600 Possibility to deliver mobile version: yes DESIGNED FOR ROUND-THE-CLOCK OPERATION! ADDITIONAL EQUIPMENT: ♦ Gas/heavy oil burners ♦ Scoop clamshell ♦ Supplementary air feed system ♦ Waste dumping device ♦ Fuel tank + filters ♦ Electric generator ♦ Semi-trailer Electric drive

Load capacity: up to 1000 kg Burning rate: Up to 150 kg/h Waste type: medical, bioorganic, solid household waste Dimensions (without funnel, m (HхLхW): 2,4х2,2х4,2 Weight, kg: 5200 / 6000 Possibility to deliver mobile version: yes DESIGNED FOR ROUND-THE-CLOCK OPERATION! ADDITIONAL EQUIPMENT: ♦ Gas/heavy oil burners ♦ Scoop clamshell ♦ Supplementary air feed system ♦ Waste dumping device ♦ Fuel tank + filters ♦ Electric generator ♦ Semi-trailer Electric drive

Magnetic couplings are used as transmission mechanisms in modern pumps, which makes it possible to obtain a qualitatively new 100% tight device without making essential changes to the design of the electric drive and the wet end of the pump. At present Villina offers GNVC, GNGC and GNVC-P series vertical, horizontal and semi-submersible centrifugal pumps with magnetic couplings, designed for pumping explosive and flammable, toxic and corrosive fluids (petroleum products, alkalis, acids, alcohols, etc). PURPOSE Magnetic couplings for Villina centrifugal pumps allow for transmission of torque from the electric motor to the pump shaft using magnetic fields generated by permanent magnets instead of mechanical engagement devices. At the same time, there is no need to withdraw the shaft from the pump wet end to the drive device, therefore the wet end can be made in the form of a completely sealed system free of leaks which are typical for pumps with mechanical shaft seals.

Villina-GNVCP-2T type vertical electric semi-submersible pumping units are designed for transit in stationary conditions of neutral, corrosive, toxic, as well as explosive and fire hazardous liquids, the vapors of which can form explosive mixtures with air. These are used in gas, petrochemical, petroleum refining and other industries. The vertical semi-submersible pump – the pump part is fully or partially in the pumped liquid. The unit consists of a pump part, drive sections, a base plate, a device that transmits torque from the drive, an electric motor (drive). The ground part comprises a console fastened to the base plate, an electric motor mounted and fastened to the console, and a mechanical seal support system fastened to a base plate. The semi-submersible part comprises drive sections fastened to the base plate, an elastic coupling body connected to the lower drive section, a pump connected to the elastic coupling body and a discharge line.

The company serially produces high-torque synchronous brushless electric motors of the series AT Drive in a frame and frameless versions with a power from 150 W to 550 W. The design allows it to be installed in products for various purposes. Motors with an axial arrangement of magnets have following advantages: - High torque; - Small diameter; - High rate of peak torque; - Compound of stator winding is resistant to the temperature shock from -60 C till +170 C; - Frameless version; - Hollow rotor; - Tuning agility of motor characteristics within 20%; - Possibility to change winding commutation method. Warranty period: 12 months.

Axial brushless electric motor AX Drive. Features: 1 High specific capacity and torque values. 2 Possible frameless use. 3 Possible control of rotation speed in a wide range. 4 Low weight, which does not significantly increase the spring weight. High torque values allow using this electric motor as a gearless drive, what significantly reduces capacity losses, weight, complexity and further maintenance ratio. Warranty period: 12 months.

EComfortable new generation tables with adjustable height for sitting-standing work. This dynamic workplace allows you to choose the comfortable for you height of the table. Now the desktop can change position with you in just a few seconds. The basic package includes: 1. electric underframe with mono drive in 3 colors to choose (black, gray, white); 2. remote control with height memory function for 4 positions. The table rises automatically to the set height. 3. Tabletop made of natural finger-jointed oak board, size 1500*760*20mm. Coated with natural German BIOFA oil in 2 layers. The height of the table is adjustable from 69.5 to 117.5 cm, excluding the tabletop. This is the basic model. If desired, it is possible to change the shape of the tabletop and install additional devices for your convenience (2USB-wireless charging, built-in socket blocks, cutouts for a phone, tablet, cortical cutout for a mug, etc.). For all questions, please contact our manager.

The СГИ 1200 cylinder head test stand is designed to detect micro cracks and air-tightness of the engine cylinder heads. The stand is equipped with a turntable for rotating the cylinder head in an aqueous solution and detecting tightness defects in different planes. This is a professional stand with pneumatic lifting and lowering of the turntable and electric 360-degree platform rotation drive. The cylinder head is sealed and placed in a heated aqueous solution. Thermal expansion of a heated part allows you to detect microcracks between valve seats, damaged plugs and other places in the cylinder head. Air is supplied through the opening in the cylinder head at a pressure of 4-6 bars. The presence of air bubbles allows you to detect a defective spot in the head.