Rs controle - Import export

The searchlights LED-75/60 are intended for the security lighting of perimeter sites and grounds of different objects. The searchlights are intended for the security lighting of perimeter sites and grounds of different objects. Like all up-to-date LED light sources it assures significant energy saving and high reliability. No stroboscopic effect and collinear optics exclude flare lighting of CCTV cameras and allow to use searchlights for lighting the zones monitored by cameras. It is possible to use different operation modes, for example, full lighting mode, standby mode, switched off. Continuous light flux in all the range of power supply is resistant to low input voltage drops and have no on delay while supplying voltage. High reliability, LEDs lifetime up to 50 000 hours. Remote control via RS-485 interface allows to fade the power of light flux directly from the guard room creating its own level of lighting on the protected sector.

The searchlights LED-40/10 are intended for the security lighting of perimeter sites and grounds of different objects. The searchlights are intended for the security lighting of perimeter sites and grounds of different objects. Like all up-to-date LED light sources it assures significant energy saving and high reliability. No stroboscopic effect and collinear optics exclude flare lighting of CCTV cameras and allow to use searchlights for lighting the zones monitored by cameras. It is possible to use different operation modes, for example, full lighting mode, standby mode, switched off. Continuous light flux in all the range of power supply is resistant to low input voltage drops and have no on delay while supplying voltage. High reliability, LEDs lifetime up to 50 000 hours. Remote control via RS-485 interface allows to fade the power of light flux directly from the guard room creating its own level of lighting on the protected sector.

Specifications OIML R76: 2006 Type Approval Certified Wide-angle 51mm high LCD screen (with backlight) Easy to install design High speed 24 bit Delta Sigma-Analog Digital converter Programmable two-stage Capacity Kg / Lb unit conversion Counting pieces Checkweighing HI-OK-LO Live animal weighing Rechargeable internal battery Battery status indicator Connecting 8 pieces 350Ohm load cell RS232 Communication RS485 Communication (Option) Real-Time Clock (Option) TECHNİCAL SPECİFİCATİONS CLASS III OIML R-76 approval reset Tare Negative measurement Auto-scan Reset at boot Manual reset Animal weighing mode Multi-range weighing Metric / Imperial conversion Battery level indication, the low battery warning 3 point orange RS-232 (RS 485 optional) Optional relay control output (i5indicators do not support this feature) optional Date / Output with Clock Ability Simple counterbalance Internal battery (i5 indicators are without battery)

BLSD‑20Modbus is a brushless DC motor controller for 3-phase motors with Hall sensors. This intelligent controller can be pre-programmed according to the system demands and work as a standalone drive, can operate as a slave in RS-485 network or operate as a simple DC brushless motor controller for speed control. BLSD-20Modbus provides position control based on Hall sensors information, speed regulation, current limiting function. Thanks to the current limiting function, BLSD-20Modbus protects the motor from overloads. Maximum rated current can be limited according to the brushless motor model (up to 20A). This controller is used for DC brushless motors 24V, 36V, 48V with rated power up to 1000W. BLSD-20Modbus can be used as a standalone unit or can be controlled by a master device in RS-485 network. The controller is programmable, the programming software is easy to use and free of charge.

BMSD‑40Modbus controllers are designed to control a DC brush motor with rated current up to 40 Amp, maximum limit current 100A. The controllers regulate the motor speed, set the direction of rotation, provide speed stabilization when using Hall sensors, and control acceleration and deceleration. Thanks to the current limiting function, the controllers protect the motor from overloads. The controllers are controlled via the RS ‑ 485 interface using the Modbus RTU or ASCII protocol or by external signals supplied to the controller inputs. The main parameters of controller BMSD‑40Modbus - Hardware short-circuit protection (time operation 15 μs): 100 Amp - Phase current limitation (response time 5 s): 2...60 Amp - Communication interface: RS-485, Modbus – ASCII or RTU

BMSD‑20Modbus controllers are designed to control a DC collector motor with rated current up to 20 Amp. The controllers regulate the motor speed, set the direction of rotation, provide speed stabilization when using Hall sensors, and control acceleration and deceleration. Thanks to the current limiting function, the controllers protect the motor from overloads. The controllers are controlled via the RS ‑ 485 interface using the Modbus RTU or ASCII protocol or by external signals supplied to the controller inputs. The main parameters of controller BMSD‑20Modbus Hardware short-circuit protection (time operation 15 μs): 30 Amp Phase current limitation (response time 5 s): 1...20 Amp Communication interface: RS-485, Modbus – ASCII or RTU