Rotating - Import export

This high-precision torque sensor is designed for both static and dynamic measurements on non-rotating parts. The 10mm diameter throughhole can be used to feed parts such as cables or Bowden cables through the sensor. The mounting flanges contain threaded holes and through-holes so that the sensor can be fitted at either end. With no rotating parts, this sensor needs no maintenance when used correctly. The modular design of this strain-gage sensor allows precise configuration for the desired application. With the integrated amplifier option, the sensor directly supplies a voltage signal of 0 ... ± 10 V that is proportional to the torque. The sensor can be configured via the micro-USB interface, providing access to, for example, a filter frequency setting, averaging, and a tare function. With the USB option, in addition to the voltage output, the measurement function is available via USB as well.

This high-precision torque sensor can be used to perform both static and dynamic measurements on non-rotating parts. The internal and external square drive design make this sensor especially easy to fit in existing or new screw-fitting applications. Quality assurance and monitoring of screw-fastening tools are just two applications that can take full advantage of sensor features such as USB port, built-in amplifier and side-load absorbing bearings. With no rotating parts, this sensor needs no maintenance when used correctly. Available accessories include mounting brackets and flange adapters, which enable quick, easy and practical integration of the sensor into existing or newly developed setups and test benches. The strain-gauge based sensor’s modular design allows precise configuration for the desired application. With the integrated amplifier option, the sensor directly supplies a voltage signal of 0 ... ± 10 V that is proportional to the torque.

Rotator for 15cm base, the essential accessory for an effective promotional display. With it, the flag will have a better fixation to the base according to the wind direction, always being visible and in the ideal position to convert even more customers. Providing greater exposure and visibility to any business or event, this detail will make visual communication even more attractive!

Big complex custom part with alot of holes and shapes.

Rotators are designed for turning workpieces and taking the appropriate position of large diameter and tonnage tank, tanker, pipe etc. The system consists of one electrically driven and one idler rotators which are roboust chasis structure and designed according to the weight of the workpiece. Rotator’s wheels designed according to workpiece specifications and diameters wheels are coated special non-slip material coatings.

Belt width 500-1400 mm (20” to 55”)

Table connector for connecting table tops made of polypropylene, metal reinforced rotatable

Rotating Piston Absorbers are displacement absorbers using hydraulic flow resistance. They are used to damp rotational vibrations, e.g. absorbers for ropeway cabins (see VDIRichtlinie VDI 3833 German Association of Engineers, sheet 1). The design is customized. Due to different operating conditions, no standard design is possible. (see also VDIGuideline, VDI 3833 sheet 1)

Incremental rotation sensors are used wherever displacement, positions or speeds have to be measured accurately. They are therefore important interfaces between the mechanical and electronic parts of a machine. Mechanically robust, electrically reliable and resistant to extreme ambient conditions; these are the outstanding properties offered by this sensor. Typical applications include —Machine tools —Wood and plastic machining —Textile machines —Lifts —Door systems —Paper machines —Drive equipment —Assembly and handling equipment —Packaging machines —Scales —Test machines —Conveying equipment —Doors and gates Specific characteristics —Degree of protection IP65, all-around —Robust —High resistance to interference —Rotary speed sensor: 60 pulses/turn (standard) —Angular displacement sensor: up to 3600 pulses/turn —Detection of rotation direction (channels A and B) —Reference pulse (channel N) —Special versions on request

To be installed at the exit of the packaging machines and welding machines. ROTATING TABLE OF ACCUMULATION WITH STAINLESS STEEL STRUCTURE AND NYLON PLAN The rotary table of accumulation is generally used in the final part of the packaging lines and facilitates the discharge of the packs, facilitating the sampling operations by the operator. The rotating tables with nylon plan are available with a diameter of 800, 1200 or 1400 mm, and are suitable for bottles, cans and products that can overturn in the concave or convex turntables. The flat rotating tables can be equipped with loading systems and automatic unloading and thus be used as "accumulation areas" between an automatic machine and another. Edges and sides nylon version Flat turntable with holding sides, polyethylene plan, useful height of 810 mm and a mechanical speed variator.

Rotating table for handling or storage of boxes, with large plan diameter 1500 o 2000 mm and capacity 200 kg. Robust. ROTATING ACCUMULATION TABLE - DIAMETER 1500 mm or 2000 mm The rotary table of accumulation is generally used in the final part of the packaging lines and facilitates the discharge of the packaging machines, facilitating the sampling operations by the operator. The table can be equipped with containing side rails and, on request, reinforced to carry heavy weights. OPTIONAL The plan may be made with customized table diameter and a different rotational speed.

ACCUMULATION ROTATING TABLE IN STAINLESS STEEL AISI 304 The rotary table of accumulation is generally used in the final part of the packaging lines and facilitates the discharge of the packs, facilitating the sampling operations by the operator. The stainless tables are available with rotating table diameter from mm. 800 to 1400 mm and exist in concave or convex version (ideal for bags and products that are accumulated) and flat (ideal for bottles, cans and products that can spill). The tables are supplied with adjustable feet up to 40 mm. On request it is possible to have wheels with brakes. Edges and sides stainless steel version The flat stainless steel version is equipped with containment rod while the concave tables do not have containment systems as the products accumulate in the center. The models in flat version can be equipped with double-rod containment, closed side with height 50 cm, exit slide, load system for incoming products

Rotating arms with full stainless steel construction with fixing to the ceiling (360º rotation) or fixing to the wall (180º rotation) ideal for rinsing and applying foam in carwash or workshops.

Rotating beacon LED flash for FERRUM wheel loaders . Will be delivered like shown. The visibility is significantly higher than the standard model with the rotating mirror and the bulb. With plug and magnetic base for easy dismantling in low clearance areas

Motorization by integrated pneumatic cylinder Driving by rack and pinion system Adjustable mechanical stops Hydraulic shock absorbers Inductive sensors The wrist of a manipulator arm These rotary modules are, for example, the wrist of a manipulator arm, the turner of parts on a conveyor or the axis of rotation of an oscillating manipulator. In general, they rotate the gripper that grips the part. These modules are equipped with hydraulic dampers and inductive sensors, the rotation guidance is ensured by 2 ball bearings that allow this module to be used in all directions, even with offcentered payload. Rotary cylinder without angular play at end of stroke The end stops located under the plate allow there to be no shock in the rack and pinion transmission and no angular play at the end of the stroke. The absence of angular play allows use in assembly or precise positioning applications with 2 positions and the absence of impact in rack

VaRoM is a Valve Rotation Monitoring system designed for reciprocating Diesel, HFO, Gas Engines. It is a patented technology that provides continuous, reliable, and safe monitoring of the valve rotation and temperature conditions of engines. VaRoM is an innovative and unique product, provides a vital data for Diesel/HFO Engines which has never been monitored before. VaRoM, is the first solution to be installed on the Inlet and Exhaust Valves of engines, and provides very critical data about the valve rotation and temperature. Thus, operators can follow the valve conditionVaRoM, is the first solution to be installed on the Inlet and Exhaust Valves of engines, and provides vital data about the valve rotation and temperature. Thus, operators can follow the valve conditions and apply preventive and protective maintenance against Valve Break Failures. Valve Break Failures are very common failures in reciprocating engines and one single valve failure can cause millions to recover the engine.

Eclipse. A rotating design lamp with soft pleasant lines consisting of a light sphere supported by a 360° swivel support enabling to play with the light intensity. Different finishes available Works with any type of bulb

Eclipse. A lamp designed with soft pleasant lines consisting of a light sphere supported by a 360° swivel support enabling to play with the light intensity. Different finishes available Works with any type of bulb

iglidur® L250: For fast rotations Bearings for fast rotary motions like, for instance, in fans and small motors. iglidur® L250 is available as cylindrical bearings and plain bearings with flange. specially developed for fast rotating applications Very low coefficients of friction Excellent wear resistance

Perfect for organising exhibitions and cultural events. Complying with French and European standards in terms of quality and safety, the display grid is an essential support for exhibiting and showcasing your creations and documents. Practical, sturdy and easy to handle. Epoxy paint finish Easy to store Supplied with 2 rotating feet

Chemical Composition: AZO Molding process: CIP+Sintering+Bonding Purity: ≥5.4g/cm3 Density: ≥ 99.95% Application: Widely used in Thin film solar cell electrode film, Low-e glass film Maximum Machining Size L 4000MM T 5MM Straight & Dogbone Customize to Customers' Specification

Hole Jewel contains a series of components that are chiefly applied as supporting bearings to the rotational systems of various accurate chronographs, auto-memorizing apparatus, precise instruments (micrometer, dial indicator) and other apparatus. Main types: Plane straight/olive holed bearing, single-cup plane straight/olive holed bearing, double-cups plane straight/olive holed bearing, raised olive holed bearing, and single-cup raised olive holed bearing, etc. ■Material Synthetic CZ/KY sapphire, ruby, single crystal α-Al2O3, natural agate, spinel, ceramic, etc.

The directly driven dividing apparatus of the TA3 series are excellent suited for the exact positioning of workpieces or, due to the high speeds, also for round machining of workpieces. The direct drive is absolutely backlash-free and ensures highest dynamics. All dividing apparatus are equipped with an automatic, pneumatically actuated clamping system. The dividing apparatus TA3G180 can be optionally equipped with an automatic hydrodehn clamping system (hydraulic expansion technology). Field of applications Rotation axis for angle positioning of work piece carriers in: Processing centers CNC - grinding machines Tool machines Laser processing machines, etc.

Automatic clamping takes place over disc springs, which are adjustable in the pre-loading and are solved pneumatically to the workpiece change. Manual clamping is made by a knurled knob on the opposite side of the collet. Due to the integration into the existing through-hole of the rotary table, the rotary table with the clamping system remains very compactly. Compact High run-out accuracy Easy to operate Retrofit possible

Shower Set NonExplosion Spiral with Sliding Lavella LVS01 Hand key function Diameter 22 chrome plated stainless pipe sliding system 175 cm steel braided chrome plated shower hose 360 degree rotating spiral Shower spiral is guaranteed for 10 years against explosion.

A lever clamping permits a simple, fast and exact adjusting of different working levels, without any efforts to adapt the devices. The swivel unit is available for the rotary tables RT2A075, RT2A100, RT2A150 und RT2A200. Field of applications: Assembly technologies, measuring and testing equipments, laser writing, welding, cutting, as well as special mechanical engineering. Features (RT2A100, RT2A200): Individually adjustable swiveling range from -5° to +95°. Fixed stop iin the 0° and 90°. Other positions possible by customer request. Clamp and locking effect through laterally installed, adjustable clamping lever. On one side appropriate scaling in 1° steps. Fixing of the swivel unit through four countersinking holes in the base plate.

While the conventional drives are dependent on an external controller unit, for the compact drives no additional controller is needed. The complete electrical parts, including the drive controller and encoder, are integrated on the motor board. Programming is done via standard PC using free software. The operation can be done without a PC, the created driving programs are stored in the compact drive and can be accessed via a separate input. Compact design Integrated motor controller and encoder RS485 or CANopen Interface Operating modes: positioning, speed, flag-position, clockdirection, analog, analog position, torque Position monitoring with automatic error correction up to 0,9° Step resolution max. 1/64 Integrated temperature monitoring Step frequency 0-50 kHz at clock-direction-mode and 0-25 kHz at the other modes

The series of RT2A distinguishes by compact design with integrated precision roller bearing and worm drive. The rotary tables are sealed, IP 50 and can be driven in all fitted positions. For the mounting, standard drilling plans and special mounting flange and clamps can be used. Different limit switches are available: Standard: reference impulse, PNP-NC, 2 channel.