Rotating units - Import export

Translation-rotation unit - Adjustable speed - Simple and accurate positioning - Compact - Simple installation - Light

Slipring transmitter are required for all rotating systems. We are able to construct and adapt them according to your requirements and of course combined with our rotary unions. So control-, working-, signal- and measuring currents are transfered from the static to the rotating unit. Our range of services: temperature range: up to 200°C, furthermore with internal cooling maximum diameter: 1600 mm current rating: up to 20.000 ampere signal transmission possible options: EX-proof, water- and gasproof, chemistry- and food resistant, special solutions

The rotary table combination RT3A100 consists of two directly driven rotary tables of the RT3A100 series. The B-axis has a swivelling range from approx. -10° to +110°; the C-axis can be rotated infinitely. The unit is driven by two integrated 3-phase synchronous motors. The drive guarantees highest dynamics and precision. An innovative clamping unit integrated in the housing guarantees high holding forces when the drives are switched off without position changes on the axes. By means of compressed are impact, the holding torque can be increased from 15Nm to 20Nm for special applications. The complete system is supplied as ready-to-connect unit.

SIMPLY ROTATE THE 3D UNIT BY 90° AND THE MASS THAT HAS TO BE MOVED IS ONLY HALF AS BIG! ZERO GRAVITY DRIVE – OR TURN WITH MASS. Through the rotation and the resulting reduction of the mass to be moved - by around half - we can use the ZERO GRAVITY DRIVE to achieve an incomparably efficient, dynamic and stable type of spindle movement in all three spatial axes. This new kinematic concept is unique in multi-spindle machining centers and enables maximum efficiency and absolute precision on the one hand and maximum utilization and extreme cost-effectiveness on the other.

The OBC-355 universal grain cleaning separator is the most multifunctional drum-type machine for cleaning grain in the world. The number of operating options for the OBC-355 grain cleaning separator exceeds 50. The multifunctionality of the OBC-355 drum cleaner allows it to be used to separate and calibrate a wide range of products (for example: a mixture of any grain, grain with very high clogging, corn with very high humidity, cotton fibers and seeds, glass balls, etc.). The OBC-355 grain cleaning machine can be used both for high-quality calibration and for preliminary cleaning with large volumes of processing. Multifunctionality is achieved due to the innovative design of OBC-355, consisting of a large number of flap valves, screws and 2 main parts: an aspiration unit that removes light impurities depending on the air flow controlled by the regulation of aspiration; cleaning and calibration unit with a rotating drum that removes small and large impurities

The laboratory vacuum shovel dryer DRUVATHERM® is a system provides reliable scale-up to production scales in the context of product and process development and can likewise be used for small batch production too. The Lödige laboratory vacuum shovel dryer DRUVATHERM® is a horizontal, batch vacuum dryer with a frequency-controlled mixing tool. This mixer consisting of mixing elements adapted to the process and arranged on a shaft according to a specific system - is installed in a cylindrical mixing drum equipped with a temperature control jacket. Rotation of the mixing unit generates a three-dimensional product movement, in which all of the product is constantly in motion. The contact frequency of particles with the heat exchange surface leads to shorter drying times. The chopper rotating at high speeds fitted to the side of the mixing drum is used to disperse the product . This leads to a significant increase in drying capacity and prevents moisture and temperature gradients.

The electronically operated One-Touch from Power Logic is a second generation of top-end workplace and boardroom connectivity solution. The classic Electrodock has been engineered to operate smoothly, silently and swiftly, driven by a powerful precision German motor, requiring just one touch to rotate the unit revealing power and data outlets. With its very low profile, the unit sits almost flush with the work-surface when closed, but revolves to a slightly raised position when ready for use, reducing the risk of spilt-liquid ingress. The One-Touch also features an obstruction detection function. In the event of an obstruction, the unit will immediately stop and reverse back to the opposite position with the LED’s in a steady (blue) state. Enjoy the clean lines and unparalleled functionality of the One-Touch range without compromising on cost. *Image used to display the style of the product. This product can accommodate the Schuko, French/Belgium and other international sockets.

Our BRM laser machine is the best option when it comes to engraving glass and mirrors! Simple designs or very detailed images? These can all be etched to the surface of the glass or mirror with a laser machine. Engraved mirrors and marked items of glass make great personalized gifts for weddings, birthdays and many other festive occasions. The best technique to draw on mirrors or tempered glass is laser engraving, the possibilities are endless! Anything you can design on paper can be transferred to glass. Laser engraving of glass and mirror is therefore often used for decoration and souvenirs. Drinking glasses, glass bottles, round and conical objects can be placed in a special rotating unit, which causes the object to rotate while being processed.

The RCP6 rotary chucks consolidate motorized rotation and gripping movement in a single unit. The rotating axis can perform multipoint positioning between 0 and 360° (one rotation). The rotational speed and acceleration/deceleration can also be set to any value. The chuck module is small and lightweight, as a solenoid gripper is used. Furthermore, the battery-less absolute encoder equipped means that home return is not required.

To meet the wide range of requirements in terms of mass moment of inertia, lead and payload, there is a comprehensive range of rotary acutators from the RCP2 and EleCylinder series with 24V stepper motor and the RCS2 series with 230 Vservo motor. RCP6 rotary grippers, which combine motorized rotating and gripping in one unit, complete the product range.

Robotic rotary bell atomizer with external charge electrodes & multi-trigger technology for water-based materials Description PPH 707 EXT external charge sprayer is dedicated to the application of waterborne materials. The performances of atomitzer and components are the same as the PPH 707 SB (dedicated to solvent paints); it is the benchmark in automotive finishing with external charge thanks to its Hi-TE technology. This version of the PPH 707 EXT features Multi-Trigger technology, which integrates a color change block in the body of the atomizer. This color change block allows for 1 super-high runner and 5 high runners, saving paint on color changes. High finish quality High transfer efficiency Easy integration Performance High rotating speed High voltage unit Hi-TE dual shaping air Dual circuit for fast color change Productivity Extremely low contamination by Dual Pin technology Large range of bell cups Lightweight for any painting robot Remote bell monitoring...

igm robot periphery The robot is mounted on the robot periphery in an upright or suspended position. The external axes of the track systems are fully integrated in the control system as NC axes, significantly extending the working area of the robot. A variety of different rotating and linear units are available, either as single axes or combined with up to three positioning units. It is also possible that several robots share a track axis. The positioning range of a longitudinal axis is up to 100 m and more. igm workpiece periphery The workpiece periphery holds, positions, and moves workpieces. The external axes are fully integrated in the control systems as NC axes and, in addition, feature manual control functionality. External axes may be included in workpiece manipulation during execution of welding steps. Using the teach pendant, they are programmed together with the robot axes. A variety of different rotary modules is available, as a single axis or combined with up to three...

The boards are trimmed, cleaned, checked and (if necessary) cooled in the nishing line. Features, function Any excess material caused by the decorative paper being larger than the carrier board is removed from edges on the nished boards in the edgetrimming unit. Rotating brushes then remove any residues that are clinging to the surface. A member of sta will visually assess the quality of the coated board on both sides at the inspection station. The boa station so that it can be inspected from the bottom. The board is then placed in the stack appropriate for its quality Advantages The modular design allows basic modules and optional modules to

Filling and mixing lines: Filling and mixing line, height and laterally adjustable Filling and mixing line, with removable mixing nozzle Mixing tube made of hard PVC, rotatable with 1 pipe clamp Filling and mixing line, galvanised steel, can be rotated using socket spanners, height and laterally adjustable mixing nozzle Mixing tube made of completely from hard PVC with flange connection with 1 pipe clamp Mixing tube made of completely from hard PVC with flange connection, height and laterally adjustable mixing nozzle with 1 pipe clamp Mixing unit completely galvanised, rotatable, height adjustable with clamp bracket and flange connection Mixing tube completely galvanised with flange connection, mixing nozzle, height and depth adjustable Mixing nozzle completely galvanised with flange connection, fixed mixing nozzle Tank filling line completely galvanised, fixed mounting, 360 degrees rotatable with flange connection Coupling parts,...

The HERCULES goat rotary milking parlour is the most advanced milking system on the market. Sheep and Goat Rotary parlour offers significant benefits to the dairy farmer. It reduces milking time, ensures smooth animals’ movement, does not require a large building for installation, and lowers labour costs vertically. Rotary parlors can milk twice the number of animals comparing to Rapid exit & Linear parlors with the same number of milking units. With rotation speeds variable from 3 to 7 minutes you can milk your flock quickly and efficiently. The robust construction of the whole platform results in smooth and nonstop operation of the platform. The anti-slipery wooden floor provides safe environment for the animals. The combination of individual entrapment & feeding creates a calm environment for the animals ( eating while being milked ). The Rotary parlour is escorted with a 500kg Glavanized sylo with auto dosing mechanism & with an entrance – exit ramp

A professional component spray washing unit with rotating basket or ramps and easy-to-open lid. Washing of parts effectively removes oil and grease contaminants, sand, dirt, dust. The unique Geyser Spray solution spraying system delivers a solution under pressure to the surfaces of items to be cleaned. The set of multidirectional nozzles allows the jets to penetrate into the most difficult-to-reach parts of the item. This guarantees high-quality cleaning. The efficient cleaning of surfaces that helps to remove a wide variety of contaminants is carried out with and alkaline cleaning solution heated to a predetermined temperature.

The boring machine, model TSB3, is designed for machining of hydraulic cylinders internal holes, with diameters from 20 up to 300 mm. The machine can be adjusted manually or automatically and it has got an electrowelded , normalized carpentry base . It is simple to use and easy to programm; it works with blocked piece and rotating tools on two opposing units. Toolholder devices, permit the machining of more diameters in the same workpiece, chamfing and internal and external threading. The machine can be adjusted manually or automatically and it has got an electrowelded , normalized carpentry base . The boring machine TSB3 is equipped with a bench with adjustable supports depending on workpieces size. The hydraulic self – centering vise ensures the perfect orthogonality of machining; the load and unload are made manually , by the operator. The machine is controlled by a CN Siemens SINUMERIK 840 D SL.

Colloide provides circular and rectangular scraping systems (plastic and steel) for settlement and flotation tanks. These tanks are generally rectangular or circular, designed to separate solids from the liquid by either settlement or flotation. Circular Tanks We offer two alternatives for circular tanks: -A rotating bridge structure powered by a peripheral drive unit. The bridge supports a frame below it onto which is fixed sludge scraping blades at floor level and a scum blade at top water level. -A fixed bridge mounted on the walls of the tank. A central drive unit rotates the scraping mechanism around the tank, the sludge scraping blades diverting the sludge to a hopper. Rectangular Tanks A chain and flight principle is used for rectangular tanks, consisting of two main chains which move the scraping booms up and down the tanks. When scraping at top water level, the booms push the floated material to one end of the tank, where it is collected by a rotating sludge pipe.

New TC620XS Series: DUAL PERSONALITY The TC620XS mowers offer dual functionality in a single machine, with just a few, simple moves being all it takes to switch between two different kinds of cut: classic grass and brushwood mowing, and mulch-mowing. This exclusive feature is catered for by the dual edge blade and inversion of the mower feed: in fact, you only need to rotate the drive unit and move the attachment of the third point to use the TC620XS in one direction or the other, depending on the type of cut you want. MULCHING-CUTTING IN TWO MOVES To set up the mower in Mulching mode, the drive unit is turned 130° and the third point is moved to the opposite side. This locks the deflector in position, and completely closes the body so that the grass is shredded by the twin-edged blade. There are many advantages with this type of mowing: the grass is cut very finely, and instead of needing to be collected and disposed of, it becomes part of an organic soil recycling process, saving not only time and money, but also the need for fertilizer and water. A HIGHLY VERSATILE RANGE ll as front - with 540, 1000 and 2000 rpm PTOs - and rear linkage, the TC620XS is available with a hydraulic motor. With an attachment that can be adapted to most applications, the hydraulic motor version can be fitted to any tractor, operating machine or hydraulic arm without a PTO by making just a few modifications, such as fitting a set of 5 rollers instead of - or along with - the 4 wheels.