Rotary screw compressors - Import export

Standard Rotary Screw compressors Built for maximum reliability. 4-350Kw / 0 – 2500cfm.

Mikropor ""Conwrap"" Separators are standard wrapped style separators. Theseseparators are designed for outside to inside flow and can be used with all oil injectionRotary Vane and Rotary Screw Compressors. Conwrap separators operate between1 to 60 m³/min flow rate at 7 bar with 1 to 3 mg/m³ oil carry over.

Our COMPRESSOR OILS stand as premium lubricants, designed to meet the needs of a wide range of air compressors, including rotary vane and screw air compressors. They are equally suitable for reciprocating air compressors that call for oils within this viscosity range. These exceptional COMPRESSOR OILS are crafted from top-grade paraffinic base oils, ensuring outstanding performance. They come fully equipped with corrosion, oxidation, and foam prevention inhibitors, offering comprehensive protection. Importantly, our COMPRESSOR OILS are Zinc Free, meeting modern environmental and performance standards.

Classical systems of the screw compressor have a regulated air cooling of the lubricating oil, which means that the excess heat is discharged into the ambient by the fan. In this way, the heat is completely lost. External heat recovery unit AirWatt is designed to efficiently exploit the waste heat, generated during compression of air in rotary screw compressors. Sometimes this represents more than 70% of the energy consumed by the rotary screw compressor for the operation. This heat can then be used to heat domestic water or for heating, at almost no additional costs. This does not only help save money but is also environmentally friendly. The unit has two separate piping systems with counterflow. Energy exchange from a compressor to sanitary water occurs in a plate heat exchanger, where compressor oil and sanitary water meets. The unit is controlled by a thermostatic valve, which prevents the compressor system from getting too cold and damaging the compressor.

Compressor oils based on polyalphaolefines (PAO) and additives with InS/H1 food grade approval. Applicable in reciprocating, rotary vane, screw and ammonia compressors.

Rotary screw-type air compressors.

Rotary screw-type air compressors.

AIRKOM promises suitable, trouble-free and high performance for every kind of application with its ESC series oil-injected rotary screw air compressors. Manufacturing and assembly of every single part of these compressors, in which latest engineering software is used during design and analysis phases, is realized considering international quality standards. EASE OF USE ESC series compressors are manufactured to be employed different areas of application without any performance loss. High performance and quality grade parts used in manufacturing and assembly of these products which are designed to make users in every level of experience easily adapt and learn, provide long maintenance periods and thus, low operating costs as a result. WIDESPREAD AFTER-SALES SUPPORT SERVICE As having operations in more than 100 countries around the globe and possessing more than 150 authorized dealers in Turkey,

AIRKOM promises suitable, trouble-free and high performance for every kind of application with its ESC series oil-injected rotary screw air compressors. Manufacturing and assembly of every single part of these compressors, in which latest engineering software is used during design and analysis phases, is realized considering international quality standards. EASE OF USE ESC series compressors are manufactured to be employed different areas of application without any performance loss. High performance and quality grade parts used in manufacturing and assembly of these products which are designed to make users in every level of experience easily adapt and learn, provide long maintenance periods and thus, low operating costs as a result.

ERCOM KOMPRESOR Produces many types of screw air compressors. you can reach directly through 00905301372145

Oxidation resistant compressor oils (polyglycol/ester) with low evaporation loss. They prevent specifically thermal decomposition and deposits in rotary vane compressors. Not miscible with mineral or PAO oils.

Fully synthetic high-temperature compressor oil based on ester oil with additives for application temperatures up to 220 °C. Especially suitable for reciprocating and rotary vane compressors.

Working pressure: 16~40bar 232~580psig Air delivery: 5.2~35m3/min 184~1236cfm Working power: 45~355kw 60~470hp High Pressures Double Screw Air Compressor is a kind of oil-injected double screw air compressor with screw air end of high quality high pressure single-stage or two-stage type. Reliable perfomance, excellent quality, enviromental protection and energy-saving. Widely applied to the industries of mine projects, medical, food, electronics, chemical plant, mechanical and so on.

Stal R5 Series Oil Filter

Low pressure screw air compressor series is a new compressor produced according to the national policy of energy saving,emission reduction and environment protection.It changes the traditional compressor with relatively high pressure.It transfers the compressed air after pressure reduction to the air consumer,which waste large amounts of energy. The low pressure screw air compressor can be distributed according to the air pressure of the user,to satisfy the process flow with minimum energy.The manufacturing cost of your product can be largely improved.For example,if your process system only needs 3 bar pressure and the used compressor can provide 7 bar, then it can be reduced to 3 bar, It may take two times power to satisfy you process system, you can choose our low pressure screw compressor only to consume half of the power,and the air pressure in the process system can still be ensured, thus realizing energy saving and emission reduction.

Gast piston air compressors and vacuum pumps are built to withstand the most rugged of operating conditions. With corrosion-resistant materials used for critical internal parts and Teflon filled rings, the design provides consistent flows throughout the service life of the compressor. All models are oilless and come in motor-mounted or separate drive styles.

The permanent magent synchronizing variable frequency compressor is a most recent compressor with excellent quality and high efficiency and energy saving at present. It is an advanced technique owned by only a few advanced countries and zones in the world. It is a high-end tendency for the future compressor development. The design concept and technical measure has broken through the traditioncal concept. It integrates the most sophisticated and energy saving technical factors.

Oil piston compressor La Padana ED 25/2M with innovative solutions and sophisticated design combining quality and reliability with special attention to the needs of the user. For professional use. •Modular design and compact size. •High efficiency and productivity. •Reduced operating costs due to low power consumption. •Minimum maintenance costs. •Excellent price/quality ratio.

Bock F14/F16/FX14/FX16 Valve Plate Assy (Includes Gaskets)

Single Stage Single-stage types are designed according to 8 bar pressure, two-stage types are designed according to 15 bar pressure and high-pressure types are designed according to 25-30 bar pressure. It is driven by V belt-pulley. Preferable as a chassis unit without air tank Preference to be able to start with mono-phase electric motors for the types with power up to 4kW Compressor is driven with F proof, IP55 protected, IE2 efficiency asynchronous electric motor. Compressor block and cylinders are casted from grey iron EN GJL250 material and the crankshaft is casted from ductile iron EN-GJS 500-7 material. Splashing lubrication is made with the help of a bar which is integrated into the design of the crankshaft. There is a mini ball valve integrated to the body, enabling easy evacuation of compressor oil. Outlet of this valve is fitted with a removable blind plug against the risk of discharged oil.

Two-stage Compression Double Screw Air Compressor, screw rotor adopts a two-stage compression engine, is to use two groups of size is not consistent, reasonable distribution of pressure, lowering the pressure level at each level compression ratio. Reduce the leakage and improve the capacity, reduce the bearing load, improve the bearing life, prolong the life of the host. The inlet of the main engine adopts the axial inlet, and the intake noise is reduced. Direct drive, high efficiency, low vibration and low noise.