Roller shutter fitting - Import export

Steel van swap body are available with following variations double wing door, steel type aluminium roller shutter door internal fitting for specific transport purpose (i.e. hanging garments, double stock, furniture transport…) custom dimensions for higher loading capacity internal width 2.480mm with or without top corner castings (for top lifting and stacking) It is possible to provide customized unit on demand.

The goal to have an entrance canopy is to enhance the appearance of the building (house, school, hospital). Not only is it created to be sufficient for many kinds of applications, but for many suit of variety of uses too. It can be adapted for more styles of roof such as apex, mono pitch, mono curve and full curve. This canopy can be outfitted with the following finishing materials : hot dipped galvanised, coated galvanised or galvanised. It can be covered with clear or opaque 5 mm heavy pet sheet. The roller shutter which is fitted in the above of the canopy allow it to be as an extra classroom in summer and an additional area during the winter. It is fabricated with aluminium to make sure it is fully water proof. The canopy is fabricated by using structural mild steel (100x100 section box, 100x60 RHS purlins, 60x60 RHS trimers)

Top mounted shutters that can also be called roller shutters are installed only at the construction stage of the facility or during the replacement of window woodwork in the already existing facilities. The box of roller blinds in this case is applied on the frame of windows or doors. Guide rails are screwed to the external part of the window frame, and only later is the whole set installed in the window recess. The box of the shutters is eventually invisible, and shutters seem to be parts of the windows.

-It is designed to cut shutter profiles for mass production, group of aluminium shutter box, vertical aluminium profiles and group of monoblock shutter box. -High saw rotation enables clean surface cutting. -Cutting speed can be adjusted. -It can cut all shutter box type including 400 mm box -Automatic measuring system (auto conveyor)

-It is designed for the processing already cut aluminium profiles that should be brought together and be locked. -Fixing the caps with staples made out of steel. -2 axis servo motor motion control -Production capacity of 240pcs/8 hours. -15.6” Pc controlled touch screen

Single-phase control panel with touch interface and smartphone control. Includes radiosens transmitter, alarm, buzzer, KEEpad, SESAME and 2 remotes. The KEEROLL solution, together with the RadioSens3 system, has direct communication with the user and the installer. Its capacitive front with illuminated keys provides comfort and security. The door can be opened and closed by any person without the need for technical know-how. The control panel incorporates the most advanced system for detecting obstacles via radio, without wires. With the RadioSens3 system you can forget about fitting a safety edge. You only need to fit the transmitter onto the last slat of the door to comply with all safety regulations. With SESAME, you can check the status of the door in real time, open and close the door from any location and receive notifications every time the door is open or closed.

Roller Shutter

A single phase roller shutter remote control system with courtesy light and control buttons. For use with roller shutter doors and roller garage doors that use a tubular motor with built in limit switches. Comes with a built in 868MHz receiver. Very easy to install, simply supply mains voltage and connect the 4 motor wires. It also has connections for a key switch, safety terminals and 24Vac output. 2 pre-programmed transmitters included.

Burglary resistance P1 burglary resistance class P3-P5 classes of protection against burglary much more security Basic anti-vandal protection Wind resistance Optimal wind protection for any windy area Withstand hurricane winds special offer - anti-hurricane system Basic margin of safety compared to a similar solution in the Prestige series Lighting adjustment Perforated and non-perforated profiles Perforated profiles allow you to adjust the degree of illumination of the room Perforated and non-perforated profiles perforated profiles allow you to adjust the degree of illumination of the room Color palette More than 19 colors individual design Forms of boxes Built-in, round, semicircular, 20 ° and 45 ° for houses made in any architectural style Built-in, round, semicircular, 20 ° and 45 ° for houses made in any architectural style Built-in and 45 ° for houses with strict geometry

YCS MAKINE is manufacturing shutter Door roll forming machines using high technology in its facility in Turkey since 2004. We bring together the Turkish engineering discipline with our knowledge and experience of more than 18 years in the metal door profile forming machines and related components, development, and production. We design and produce our Roller shutter roll forming machines based on their efficiency, reliability, life-long-running tooling, and craftsmanship. We are exporting 80% of our machines abroad and our profile forming machines running in more than 30 countries. Know-How and engineering capability for different Countries and customers customized demands. Certificates: CE /ISO 14401:2015/ISO 1002:2018/ISO 9001:2015

Our FULLSET roller shutter system which designed to look better with hiding roller box. Enhances the insulation level which better than those tradional metal box. You can apply with and without window frame. when shutter in closed position, you can't see anything about the roller parts from outside looking.