Roller mills - Import export

It is used for breaking and crushing wheat in flour factories. The most important machine of the flour mill, the roller mill consists of two pairs of roller balls operating in parallel. Unlike the pneumatic roller, the incoming product amount is measured with the help of a sensor or load cell. Feeding rollers change speed according to the incoming product amount and provide homogeneous flow. At the same time, the gap between the rolls is closed by pneumatic pistons and allows the product to be grinded by passing through the rolls. The bearings of the rolls are ductile iron and the arms of the rolls are conical. It is produced with gear drive and belt drive. It can also be produced with an optional touch control screen. Especially thanks to the side covers that can be opened one by one based on the opening system, it provides fast and easy access and the possibility of rapid ball removal with the cover opened on the ball.

It is used for breaking and crushing wheat in flour factories. The most important machine of the flour mill, the roller mill consists of two pairs of roller balls operating in parallel. Unlike the pneumatic roller, the incoming product amount is measured with the help of a sensor or load cell. Feeding rollers change speed according to the incoming product amount and provide homogeneous flow. At the same time, the gap between the rolls is closed by pneumatic pistons and allows the product to be grinded by passing through the rolls.

In flour mills, the roller mill is used to break and crush the wheat. This is the most important machine of a flour mill. It consists of two pairs of parallel working rolls. The product that collects into the inlet glass moves the pneumatic pressure plates and the feed rolls start to feed the products homogeneously into the rolls. In the meantime, the gap between the rolls is reduced by pneumatic pistons and the product is ground by passing between the rolls. The bushings of the roller mills are spheroid casting and the rolls have conical arms.

The POITTEMILL pendulum roller mill is a vertical mill that works by compressing the material bed. The pendulums mounted on a star wheel are driven by a vertical shaft. Each pendulum is fitted with a grinding roller that rotates upon its axis. The rotation of the star wheel combines with the articulation of the pendulum to generate a centrifugal force at the grinding roller level. The product is ground between the grinding roller and the fixed bull ring.

Forming profile group, manufacturing, repairing, correction, revision and rectifying work

Cold and hot drawing rolling mills, ring, roller, roller, disk or forming roller ring etc., called profile, wire, cable, electrode, iron, copper etc. The processing, manufacturing or, if desired, the correction of the rolling mills used in the drawing of materials such as profile, wire, cable, electrode, iron, copper etc. By performing highly precise cnc machining, both the quality of the product to be obtained is increased and the optimum benefit is provided to the customer by extending the life of the rolling mills used. By correcting the rolling mill tool, the customer's remanufacturing costs are reduced and the service life of the rolling mill tools is increased. Now these roller rings are processed and manufactured in the same quality in Turkey.

This machine is used in flour mills to separate the stuck core particles in the product coming from the roll. In this way, in flour production; Soft separation does not spoil the product. Both floor and ceiling hanging position shape, Right and left directions of spinner bars, Low power requirement, Coupling or pulley connection system Application Fields ◾ At flour mills ◾ At coarse and fine semolina passages ◾ After roller mills or before plansifter inlet

Wear is a damage consisting in gradual removal or deformation of material on solid surfaces, caused by mechanical (e.g. erosion) or chemical (e.g. corrosion) influences. In machine elements, wear may give rise to material failure or loss of functionality. For the application in question, our client has to measure wear on the surface of rollers in cement mills. Up from a certain depth, reactions are required, generated by a warning system to be developed In this project, we used several robust QuellTech Q6 scanners to cover fully the roller width. Due to the high rotational speed of the rollers, we preferred our fastest scanners for this application. We furthermore developed a software solution and implemented a warning system, based on the critical depth of the wears on the surface. By means of this system, the customer can determine the correct time for exchange of the rollers.

Ready to install sprockets with hub on one side for DIN ISO 606 roller chains. Teeth are milled and inductively hardened. Keyway acc. to DIN 6885 / BS 4235. The keyway is aligned with the tooth tip. With two grub screws. One tapped hole aligned with the keyway centre, the other offset by 90°.

It is used for the transportation of semi products from the roller mills to the plansifters. Produced specifically for each pneumatic line; our pneumatic fans are designed according to the calculated necessary air pressure and air flow. Thanks to rubber vibration dampeners underneath the machine and rubber flanges at the sucktion and disharge pipes, the vibration is prevented from reaching the pneumatic line and the building.

In flour mills, the square plansifter is used for the classification of the product coming from the roller mill. It provides high sifting capacity in limited spaces. The sifter is used by hanging it to the ceiling using fibreglass hanging rods and it consists of three main parts: two sieve boxes housing the sifter frames and sieves and a drive section that houses the motor and the counterweights. Inside the sieve boxes, there are synthetic resin-coated frames and sieves. The product entering the plansifter can be separated into 7 different varieties. The use of wide frames can increase the sifting surface by up to 22%. Every sifter passage can fit up to 32 frames. For ease of transportation, the machine can be divided into three parts. The surfaces in contact with the flour are painted with food-grade paint and they can also be covered with stainless steel upon request.

Equipped with advanced CNC machinery, including lathes, mills, plasma cutters, rollers, and welders, we have the capabilities to manufacture a wide range of precision metal parts to your exact specifications. With a production capacity of 3000 tons per year, we're well-equipped to handle orders of any scale.

Equipped with advanced CNC machinery, including lathes, mills, plasma cutters, rollers, and welders, we have the capabilities to manufacture a wide range of precision metal parts to your exact specifications. With a production capacity of 3000 tons per year, we're well-equipped to handle orders of any scale.

It is used in the sieving and classification of the grains milled by the Roller Mill Machine

Maintenance free, dry, dust deflecting High temperature resistant Wear protection for metal running faces and rails with minimized friction loss and impressive increased life time of application Highly efficient, reduction of noise and environmental impact Main application Cranes Conveyor systems Guiding rollers Pressure rollers at rotary kilns Dryers Mills Rope drives Chain drives Locomotive wheels Carousel shelf systems

require high precision, large rated moving load, and high maximum rotation speed. By adopting the new technology of material processing, KFB has successfully manufactured bearings of long service life that are highly fatigue resistant and impact resistant. The types of bearings made by KFB for the metallurgical roller mills are: split bearings; unit rollers; support roller bearings; single row, double row, three row, four row cylindrical roller bearings, fully-loaded cylindrical roller bearings, spherical roller bearings. The use of split bearings appreciably facilitates assembly and repair operations compared to the use of nonsplit (conventional) bearings. It does away with the need for the disassembly and subsequent reassembly of intermediate parts and mechanisms, which is required when replacing conventional bearings. It also reduces costs and production losses. If provided with efficient cooling, reliable lubrication and proper sealing, split-bearing components can be used...

Jaw plate and Side plate for Jaw crusher; Mantle, Concave for Cone Crusher; Blow bar and Hammer for Impact Crusher and Hammer/Metal crusher; Roller and Ring for Raymond Mill; Roller Liner and Disc Liner for Sand making VSI Crusher, Chocky bar and Wearing button for Excavator, which is in the material of High Manganese Steel Mn13Cr2/ Mn14Cr2/Mn17Cr2/Mn18Cr2/Mn22Cr2; High Chrome White Iron Cr20/Cr22/Cr24/Cr26, and its with Mo, Ni, Re, Ceramic, Alloy, Bi-metal etc wear-resistant materials. And HUAN-TAI products support for Shanbao, SBM, Liming, Shibang, Zenith, Metso, Sandvik, Barmac, Trio, TEREX, Pegson, Powerscreen, Kleemann, MINYU, Symons, Hazemag, Cedarapids, McClosey, Keestrack, Telsmith, Russian brands and other famous brands machine. We also can produce the wearing spare parts as per customers’ own drawings

Jaw plate and Side plate for Jaw crusher; Mantle, Concave for Cone Crusher; Blow bar and Hammer for Impact Crusher and Hammer/Metal crusher; Roller and Ring for Raymond Mill; Roller Liner and Disc Liner for Sand making VSI Crusher, Chocky bar and Wearing button for Excavator, which is in the material of High Manganese Steel Mn13Cr2/ Mn14Cr2/Mn17Cr2/Mn18Cr2/Mn22Cr2; High Chrome White Iron Cr20/Cr22/Cr24/Cr26, and its with Mo, Ni, Re, Ceramic, Alloy, Bi-metal etc wear-resistant materials. And HUAN-TAI products support for Shanbao, SBM, Liming, Shibang, Zenith, Metso, Sandvik, Barmac, Trio, TEREX, Pegson, Powerscreen, Kleemann, MINYU, Symons, Hazemag, Cedarapids, McClosey, Keestrack, Telsmith, Russian brands and other famous brands machine. We also can produce the wearing spare parts as per customers’ own drawings

Jaw plate and Side plate for Jaw crusher; Mantle, Concave for Cone Crusher; Blow bar and Hammer for Impact Crusher and Hammer/Metal crusher; Roller and Ring for Raymond Mill; Roller Liner and Disc Liner for Sand making VSI Crusher, Chocky bar and Wearing button for Excavator, which is in the material of High Manganese Steel Mn13Cr2/ Mn14Cr2/Mn17Cr2/Mn18Cr2/Mn22Cr2; High Chrome White Iron Cr20/Cr22/Cr24/Cr26, and its with Mo, Ni, Re, Ceramic, Alloy, Bi-metal etc wear-resistant materials. And HUAN-TAI products support for Shanbao, SBM, Liming, Shibang, Zenith, Metso, Sandvik, Barmac, Trio, TEREX, Pegson, Powerscreen, Kleemann, MINYU, Symons, Hazemag, Cedarapids, McClosey, Keestrack, Telsmith, Russian brands and other famous brands machine. We also can produce the wearing spare parts as per customers’ own drawings

Jaw plate and Side plate for Jaw crusher; Mantle, Concave for Cone Crusher; Blow bar and Hammer for Impact Crusher and Hammer/Metal crusher; Roller and Ring for Raymond Mill; Roller Liner and Disc Liner for Sand making VSI Crusher, Chocky bar and Wearing button for Excavator, which is in the material of High Manganese Steel Mn13Cr2/ Mn14Cr2/Mn17Cr2/Mn18Cr2/Mn22Cr2; High Chrome White Iron Cr20/Cr22/Cr24/Cr26, and its with Mo, Ni, Re, Ceramic, Alloy, Bi-metal etc wear-resistant materials. And HUAN-TAI products support for Shanbao, SBM, Liming, Shibang, Zenith, Metso, Sandvik, Barmac, Trio, TEREX, Pegson, Powerscreen, Kleemann, MINYU, Symons, Hazemag, Cedarapids, McClosey, Keestrack, Telsmith, Russian brands and other famous brands machine. We also can produce the wearing spare parts as per customers’ own drawings

The Support roller is main used in rotary kiln / dryer / cooler and rotation device, usually there are two sets or three sets support roller in one rotary kiln, there will be a set support roller with thrust roller when three sets support roller be used. The support roller bear all weight of device, so it made by quality cast steel, and rolling through a axis in the center of support roller. zoeyguo369@gmail.com wechat:chaoyangrunxing

C profiles are produced by cold forming on roller mills from galvanized coiled steel with a thickness of 0.5 to 3.0 mm, have a wall height of up to 300 mm and, at the request of the customer, can be provided with holes for bolted connections. The length and thickness of the profiles is determined during the design and can be up to 12 m. The thickness of the zinc coating is from 100 to 600 g / m2. The galvanized profile С with acceptable price is suitable for influence of high and low temperature, humid environment, solar radiation. Such profile is used for the construction of warehouses, production workshops, trade pavilions and centers.

The profile U is used in the manufacture of columns, beams, trusses for the load - bearing frames of buildings. It can be used as roofing and wall purlins, lathing, assembly traverse. U profiles are produced by cold forming on roller mills from galvanized coiled steel with a thickness of 0.5 to 2.0 mm, have a wall height of up to 300 mm and, at the request of the customer, can be provided with holes for bolted connections. The length and thickness of the profiles is determined during the design and can be up to 12 m. The thickness of the zinc coating is from 100 to 600 g per sq. m. The galvanized profile U with acceptable price is suitable for influence of high and low temperature, humid environment, solar radiation. Such profile is used for the construction of warehouses, production workshops, trade pavilions and centers.

The profile Angle Bar is used to connect other profiles during installation, both support tables and self - supporting structures for arranging a ventilated facade. Most often, the corner is used in the manufacture of arched structures, as well as in other structures where there is some bend. Also, the corner can be used in furniture production, providing even corners. The profile ANGLE BAR are produced by cold forming on roller mills from galvanized coiled steel with a thickness of 0.5 to 3.0 mm, have a wall height of up to 300 mm and, at the request of the customer, can be provided with holes for bolted connections. The length and thickness of the profiles is determined during the design and can be up to 12 m. The thickness of the zinc coating is from 100 to 600 g / m. sq. The profile ANGLE BAR with acceptable price is suitable for influence of high and low temperature, humid environment, solar radiation.

The DYNAIR is a Double Whizzer Dynamic classifier. This type of separator is usually installed on Pendulum Roller mills but can be used in a pneumatic circuit, alone or combined with a Pulverizer or Ball mill with the possibility of recycling the oversized particles